Based on the analysis of the evanescent wave from total internal reflection, a light-emitting diode (LED) structure with a plasmonic Ag nanostructure and indium tin oxide (ITO) grating was proposed to enhance the extraction efficiency. The two-dimensional finite-difference time-domain method was used to study the spectral properties of the hybrid structure and the effects of structure parameters on extraction enhancement. The results demonstrate that the plasmonic Ag nanostructure can couple the evanescent wave to a propagation wave around the GaN/ITO interface, and then the photons are scattered out of the LED chips by the ITO grating with high extraction efficiency. Under the optimal parameters, the light extraction efficiency can reach approximately three times the original value at a relatively longer wavelength.
This study numerically investigates the effect of using a new electron blocking layer (EBL) for blue InGaN light-emitting diodes (LEDs) to improve hole injection efficiency and electron confinement. Simulation results suggest that the carrier transportation behavior of the EBL can be appropriately modified by adept control of the graded AlGaN layer. Furthermore, when compared with the conventional LED structure, the redesigned LED with graded AlGaN layer shows a slight improvement in forward voltage Vf and a significant enhancement in light output power. The redesigned LED can achieve an exceptional increment of 106.6% in light output power at 100 mA when compared with conventional LED. The observed improvement in the photoelectric performance of blue LEDs is primarily due to the reduced polarization effect at the last-barrier/EBL interface, as a result of the graded Al composition in EBL.