Relativistic backward oscillator (RBWO) has been developing toward the millimeter wave, which is easy to cause RF breakdown due to the reduction in device size. Using the overmoded slow wave structure (SWS) and selecting high-order mode to operate can effectively prevent RF breakdown. In this article, we analyzed the physical mechanism of the overmoded SWS dispersion curve, especially the asymmetric mode, and quantitatively obtained the variation laws of the dispersion curve and approximate methods by a concise mathematical formula. Based on these laws, we proposed methods for controlling the quality factor effectively and calculating the coupling impedance. The mode control method considering asymmetric mode is verified through 3-D PIC simulation.
Scanning spreading resistance microscopy (SSRM) measurements were performed on GaAs thick films grown by hydride vapor phase epitaxy technology under different growth conditions to evaluate their carrier concentrations. For this purpose, a calibration curve was established based on a multilayer staircase structure grown by molecular beam epitaxy. The dopant calibration range measured by secondary ion mass spectrometry is from 5 × 1016 to 1019 cm−3. An abnormal phenomenon in the calibration process was explained by taking into account the parasitic parallel resistance of the calibration samples. Finally, the calibration curve was used to quantitatively analyze the carriers inside the Zn doping p-type GaAs film from 4 × 1016 to 1018 cm−3 range. We demonstrate here the applicability of SSRM to the in-depth analysis of thick epilayers, providing new inputs for the control of thick film technologies.
18 June 2025 in IEEE Transactions on Plasma Science
Photoconductive semiconductor switches (PCSSs) are noted for the rapid turn-on time and optically isolated triggering, making them suitable for high-power applications. Gallium oxide (Ga2O3), as an ultra-wide bandgap semiconductor, is promising for use in PCSSs with ultrahigh breakdown voltage and power density. This study investigates the avalanche process of Ga2O3 PCSSs triggered by pulsed optical sources through computational simulations, focusing on the electric field distribution, carrier dynamics, and optoelectronic response. The responsivity of Ga2O3 PCSS exceeds 100 mA/W when the optical power ranges from $10^{4}$ to $10^{6}$ W/cm2. The rise time of the switch significantly decreases from 6.5 to 2 ns with an electric field of 6 MV/cm. Results reveal that a high-density avalanche domain forms and propagates within the device with peak electric fields ranging from 6 to 8 MV/cm. Furthermore, we demonstrate that the switching time of Ga2O3 PCSS can be shorter than 500 ps. This research provides design guidance and crucial insights into the carrier dynamics of an ultrafast Ga2O3 PCSS.
The coaxial wiggler with periodic permanent magnet is one of the ways to realize portable and practical high power microwave, which has a relatively small volume and low weight. However, the electromagnetic mode competition will significantly affect the output power at a high electron current. Based on the dispersion curve considering the effect of the electron beam, we propose a method of judging whether the mode can oscillate as the main mode in the coaxial magnetic wiggler. We analyze the wave–beam interaction by the first-order perturbation and predict some modes that seem impossible in traditional methods. It is verified by 3D particle-in-cell simulation that these electromagnetic modes will be the operating modes.
3 October 2023 in IEEE Transactions on Electron Devices
Magnetically insulated transmission lines (MITLs) are essential for transmitting high-power pulses in accelerators for high-energy-density physics. However, the off-centered effect of electrodes in long MITLs of large-scale pulsed power accelerators is nonnegligible, which can generate nonuniform electromagnetic fields and charged particle flow. In this study, the 1-D magnetically insulated flow theory is extended to a long MITL with an off-centered cross section based on the pressure balance equation. Solutions relating operating voltage V to the anode current I $_{\textit{a}}$ and cathode current I $_{\textit{c}}$ , are derived, and 3-D particle-in-cell (PIC) simulations are performed to verify and rescale the extended model. The results show that the azimuthal magnetic field of an off-centered MITL is approximately the cosine function of the azimuthal angle. Based on the agreement between the extended model and the PIC simulation, the dependence of the charge uniformity coefficient on the operating voltage and off-centered coefficient is summarized. The charge uniformity of an off-centered magnetically insulated flow increases with the operating voltage and decreases with the rising off-centered coefficient. Furthermore, the results illustrate that a 5% off-center displacement of the center conductor in an MITL gives about 6.5% non-uniformity in azimuthal magnetic field and about 0.13% increase in self-limited current to ensure power transmission.
The AlN/GaN nanowire structures hold significant promising for enhancing the emission efficiency of ultraviolet light-emitting diodes. However, their electrical doping mechanisms remain insufficiently understood and require indepth investigation. Scanning spreading resistance microscopy (SSRM) was performed to systematically investigate the dopant distribution of Si-doped AlN/GaN nanowires (NWs) grown by plasma-assisted molecular beam epitaxy with Si cell temperatures ranging from 800 to 1000 °C. To ensure sample flatness at different NWs length, the NWs were embedded in a sol gel silica, and samples were subsequently polished in order to obtain a beveled profile. The nanowires doping trends were extracted from the SSRM data by deconvolution of silica and NWs responses. These studies demonstrated the axial uniformity and the radial uniformity of the NW core of Si.