15 March 2018 in Transportation systems and technology
This paper presents research results of the Active Vision Area, formed by the Active Pulse Television Measuring System in conditions of decreased transparency of propagation medium. Aim: To increase backscatter interference suppression efficiency by the Active Pulse Television Measuring System for ensuring navigation of transport means in heavy weather conditions. Methods: Simulation of Active Vision Area considering light energy attenuation is proportionate to the square of distance and attenuation caused by propagation atmosphere. Performance of experimental researches with the Prototype of Active Pulse Television Measuring System using Big Aerosol Chamber, simulating dense fog and smoke conditions. Results: The designed model of Active Vision Area allowed estimating the changes of light energy distribution in the observed space layer depending on range of observation and transparency of radiation propagation medium. With equal duration values of the illumination and strobing pulses of the photodetector in conditions of dense fog, significantly big residual backscatter interference was revealed, maximum intensity area of the radiation reflected from objects was displaced from a distance of strobing delay. Illumination pulse duration reduction led to increase of backscatter interference suppression efficiency, improvement of image contrast and increase of accuracy of determination of distance to the observed objects. Conclusion: The increase of backscatter interference suppression efficiency by the Active Pulse Television Measuring System for ensuring navigation of transport means in heavy weather conditions is a relevant task
1 January 2019 in Atmospheric and Oceanic Optics
Results of laboratory experiments on studying the influence of scattering and absorbing media on the quality of object imaging with active pulsed television optoelectronic systems (OESs) are...
1 March 2020 in Journal of Physics: Conference Series
The paper proposes an approach for visualizing objects on images obtained with active-pulse television measuring systems (AP TMS) by range. The calculation of the AP TMS active vision area shape allows getting data of the light energy distribution inside the active vision area. To distinguish the object of interest on the video frame, an inter-frame difference of several frames obtained with different gating delays can be found. The equation of inter-frame difference for three frames is proposed. The difference simulation for three active vision areas was performed. To test the method of images space-time filtration by range, we used images obtained as a result of experimental studies conducted using large aerosol chamber of the V.E. Zuev Institute of Atmospheric Optics of Siberian Branch of the Russian Academy of Science (IAO SB RAS). In order to conduct the experiment video frames obtained under conditions of normal transparency of the propagation medium at different gating delays of the image intensifier tube (IIT) were taken. During the experiment, an image of the measuring table located at a distance of 15 m was distinguished, and the remaining objects located in the system’s field of view were successfully removed using space-time filtration. Removing of the “unwanted” information from images will increase the compression ratio and speed up the algorithms for further processing.The results obtained in this paper contribute to a more efficient use of the AP TMS for the purpose of detection and recognition of the objects under various conditions of visibility.
1 January 2024 in Omsk Scientific Bulletin
TRTomsk State University of Control Systems and Radioelectronics
Tomsk State University of Control Systems and Radioelectronics
In this article, we will consider and compare methods for eliminating distortions in the original images obtained from an unmanned aerial vehicle. The main goal of these methods is to increase the contrast and accuracy of determining the coordinates of objects of interest relative to the background. To conduct the study, aerial work is performed, during which initial images of the underlying surface with different exposure times are obtained, as well as data from the unmanned aerial vehicle navigation module. Further, cameral processing of the received materials is carried out. The exact centers for photographing each image are calculated and orthophotomaps of the area are built. Then we have evaluated the contrast and accuracy of determining the coordinates of objects of interest relative to the background on the orthophotomaps of the area built from the original and restored images using various methods.