Motivated by the agility of animal and human locomotion, highly dynamic bionic legged robots have been extensively applied across various domains. Legged robotics represents a multidisciplinary field that integrates manufacturing, materials science, electronics, and biology, and other disciplines. Among its core subsystems, the lower limbs are particularly critical, necessitating the integration of structural optimization, advanced modeling techniques, and sophisticated control strategies to fully exploit robots’ dynamic performance potential. This paper presents a comprehensive review of recent developments in the structural design of single-legged robots and systematically summarizes prevailing modeling approaches and control strategies. Key challenges and potential future directions are also discussed, serving as a reference for the future application of state-of-the-art manufacturing and control methodologies in legged robotic systems.
14 January 2026 in IEEE/ASME Transactions on Mechatronics
Vertical jumping performance of the limb leg unit (LLU) significantly impacts the movement of legged robots. In this article, a multiobjective joint optimization method for the trajectory generator and controller coupling parameters is proposed. This method constructs a quasi-realistic simulation model with physical feasibility constraints, ensuring an accurate representation of the physical prototype performance. Subsequently, the design variables and objectives are defined considering the inherent coupling relationships and complex evaluation metrics of the LLU. By leveraging data from the proposed model, the empirical objective functions are formulated in the form of a response surface model and used to analyze the influence of variables on different objectives. An improved genetic algorithm with weight selection is proposed to prioritize maximizing the jump height while satisfying the optimization objectives. Finally, the accuracy of the quasi-realistic model is validated by experiments and the results demonstrate an increase of 11.95% in jump height and a decrease of 6.60% in force ratio compared with the conventional method. The joint optimization method can serve as a valuable reference for parameter selection in other multivariable, multiobjective, and multiconstraint problems.
1 December 2025 in Journal of Zhejiang University-SCIENCE A
Hydraulic legged robots have potential for high-dynamic motion due to their large power-to-weight ratios. However, it is challenging to ensure both stabili
28 January 2026 in IEEE Transactions on Instrumentation and Measurement
Independent metering control systems (IMCS) pose significant fault diagnosis challenges due to strong hydraulic– mechanical coupling, limited sensing, and the indirect mapping between internal faults and measurable signals. To address the limited fault coverage of existing IMCS diagnostic approaches, this paper presents a model-based fault diagnosis framework enhanced with fuzzy logic reasoning. First, a physical model is calibrated using time-domain similarity metrics to improve consistency between simulated and measured responses. Using this model, state- and input-based residuals are derived by exploiting IMCS analytical redundancy. These residuals capture the characteristic signatures of valve, displacement, and pressure sensor faults. To further enhance robustness, a trend-aware residual smoothing mechanism is introduced to suppress fluctuations caused by noise and disturbances while preserving fault-related signatures. The smoothed residuals are then evaluated by a fuzzy logic-based system, enabling interpretable fault classification and severity estimation. Experimental validation on a full-scale test platform demonstrates that the proposed method can accurately identify multiple fault types and severity levels, achieving an overall diagnostic accuracy of 96.67% without requiring additional sensors or hardware modifications. Future work will extend this framework from single-fault conditions to concurrent fault diagnosis.