2 March 2014 in Advanced Functional Materials
17 May 2013 in Advanced Materials
1 July 2020 in IEEE Sensors Journal
Aluminium nitride piezoelectric thin films grown on sapphire are strong candidates for high-temperature surface acoustic wave (SAW) sensors, due to their thermal stability, large bandgap, high acoustic velocity and suitable electromechanical coupling. However, thin-film resonators need more design efforts than those based on bulk crystals, due to the usually limited thickness of the piezoelectric films, and to acoustic properties disparities between the latters and their host substrate. This work presents an optimization of AlN/Sapphire-based SAW resonators with high quality factors for high-temperature applications. It combines specifically grown, 3 μm-thick aluminium nitride films, with the use of aluminium electrodes for their low density and resistivity, as an alternative to heavier electrodes like Pt. These electrodes allow for much lower mechanical losses and higher quality factors, in spite of needing passivation for increased lifetime. A standard resonator design is first presented and used for preliminary tests, in order to monitor the AlN/Sapphire structure with unprotected aluminium electrodes, for temperatures up to 600°C. A quasi-synchronous, optimized design is then proposed for higher quality factors and wireless sensing compliance. The high temperature characterizations confirmed that much larger quality factors can be retrieved from this optimized design. The quasi-synchronous resonators proposed in this study remain well-tuned for temperatures up to 400°C, and show high quality factors, as high as 3400 at 400°C.
12 March 2021 in IEEE Sensors Journal
Sensors based on "resonance phenomenon" span a broad spectrum of important current applications including detection of biological and chemical agents, and measurements of physical quantities. Resonance phenomena occur with all types of waves: electromagnetic, optic, and acoustic. This review reports about the most recent advances in the design and applications of resonant "passive" sensors, i.e. resonant sensors able to operate with a distant power source and/or able to communicate with a distant transceiver. The sensors considered in this review include acoustic, magnetoelastic, and electromagnetic transducers. They are presented through their relevant technological aspects and through they major advantages which include their integrability within embedded systems and/or systems requiring energy autonomy. Furthermore, the use of these resonant sensors is illustrated in a large variety of applications, ranging from environmental monitoring, structural health monitoring, food packaging monitoring, wearable or implanted sensors for the monitoring of physiological parameters in healthcare related applications, to IoT and future industry monitoring applications.
1 April 2016 in Sensors and Actuators A: Physical
1 August 2017 in Physical Review Applied
While surface acoustic wave (SAW) sensors have been used to measure temperature, pressure, strains, and low magnetic fields, the capability to measure bipolar fields and high fields is lacking. In this paper, we report magnetic surface acoustic wave sensors that consist of interdigital transducers made of a single magnetostrictive material, either Ni or , or based on exchange-biased () multilayers. By controlling the ferromagnet magnetic properties, high-field sensors can be obtained with unipolar or bipolar responses. The issue of hysteretic response of the ferromagnetic material is especially addressed, and the control of the magnetic properties ensures the reversible behavior in the SAW response.