16 April 2025 in IEEE Transactions on Instrumentation and Measurement
We report on the realization of a temperature-induced noise-insensitive laser repeater station (TiLRS), which can effectively remove the annoying out-of-loop phase noise existing in the conventional laser repeater station (LRS). TiLRS is able to achieve the same capability as the conventional LRS including power amplification, signal regeneration and phase noise compensation. More importantly, based on the out-of-loop noise inline detection and the active noise compensation (ANC) setup, our system gets rid of the need for the sophisticated temperature control system and precise out-of-loop path matching. In addition, we also design the temperature-induced noise-insensitive local station (TiLS) and remote station (TiRS) as well as the modified two-way comparison (MTWC) method for the instability evaluation. The phase-temperature coefficient of the proposed cascaded system can achieve 9.1 as/K, which is three orders of magnitude lower than the same configuration suffering from the out-of-loop noise and is the best value reported so far for the fiber-optic interferometer. We experimentally demonstrate the cascaded optical frequency transfer system by using one TiLRS connecting the 460 km commercial fiber link with the fractional frequency instability of about 1.01×10−15 at 1 s and 1.20 × 10−19 at 10,000 s. This technology paves the way for the optical frequency transfer networks with high accuracy, high robustness, and low temperature sensitivity.
16 September 2024 in IEEE Transactions on Instrumentation and Measurement
Unprecedented ultra-stable free-space optical clock networks will promote widespread applications such as navigation, gravitational sensing and spectroscopy. However, for optical frequency comparison, there inevitably occur non-reciprocal phase noise due to atmospheric turbulence and the Doppler shift caused by platform motion. In this paper, we propose a novel Doppler shift suppression technique, enabling nearly-continuous optical frequency comparison for a kilometer-level moving platform. The Doppler shift-introduced phase deviation in the two-way optical frequency comparison (TWC) system can be passively eliminated by adding a time delay before the measurement site to match the link propagation delay. Moreover, the cycle slips and data interruptions can be effectively suppressed with the help of the phase modification algorithm based on Kalman filtering process, resulting in nearly-continuous operation of the system. The experimental results demonstrate the Allan deviation (ADEV) result can reach to 3.45 × 10−19 at 1,000 s after time delay compensation, which is one order of magnitude lower than that without any time delay, for the 1.2 km free-space link with a simulated Doppler shift of 1 MHz. Our proposed technique provides an alternative solution for wide-scale free-space optical frequency transfer in the presence of Doppler shift.
1 October 2026 in Journal of Lightwave Technology