State Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, P. R. China
Auto-generated profile, based on publicly available information
Peng Guo
State Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, P. R. China
High-performance thermogalvanic cells have the potential to convert thermal energy into electricity, but their effectiveness is limited by the low concentration difference of redox ions. We report an in situ photocatalytically enhanced redox reaction that generates hydrogen and oxygen to realize a continuous concentration gradient of redox ions in thermogalvanic devices. A linear relation between thermopower and hydrogen production rate was established as an essential design principle for devices. The system exhibited a thermopower of 8.2 millivolts per kelvin and a solar-to-hydrogen efficiency of up to 0.4%. A large-area generator (112 square centimeters) consisting of 36 units yielded an open-circuit voltage of 4.4 volts and a power of 20.1 milliwatts, as well 0.5 millimoles of hydrogen and 0.2 millimoles of oxygen after 6 hours of outdoor operation.
In order to obtain the electromagnetic scattering of ground surface combining with man-made target. The geometric composite pyramid-ground model is built by the means of digital elevation data superposition method and the faceted element is used to describe the composite model to calculate the electromagnetic scattering. Then the echoes of the composite model are obtained by superimposing the echoes of all the facets. The simulation results show that the feature similarity between the geometric model and the simulation image is consistent. In addition, the fluctuation of the corresponding ground coordinate is also consistent.