23 December 2020 in Journal of Materials Chemistry A
Left image is the relationship for the overpotential for water dissociation as a function of bipolar junction electric field whereas the right image presents micrographs and the procedure to make bipolar membranes with micropatterned interfaces.
4 March 2020 in Molecular Systems Design & Engineering
Electrochemical separation processes are undergoing a renaissance as the range of applications continues to expand because they offer opportunities for increased energy efficiency and sustainability in comparison to conventional separation technologies. Existing platforms such as electrodialysis and electrodeionization (EDI) are seeing significant improvement and are currently being deployed for treating a diverse set of liquid streams (e.g., water and wastewater treatment, organic acid separation, etc.). In addition, the relatively low inherent electricity requirement for electrochemical separations could potentially be satisfied through integration with sustainable sources of renewable energy. In order to achieve a truly sustainable electrochemical separations process, it is paramount to improve the energy efficiency of electrochemical separations by minimizing all sources of resistances within these units. This work reports of a new class of symmetric and asymmetric Janus bipolar resin wafers (RWs) that augment the spacer channel ionic conductivity in EDI while having the additional functionality of splitting water into protons and hydroxide ions. The latter attribute is important in niche applications that require pH modulation such as silica and organic acid removal from liquid streams. The Janus bipolar RWs were devised from single ion-conducting RWs that were interfaced together to create an intimate polycation–polyanion junction. Interestingly, the conductivity of the single ion-conducting RWs at low salt concentrations was observed to be dependent on the ionic mobilities of the counterions that the RW was transferring. Using single ion-conducting RWs to construct Janus bipolar RWs enabled the incorporation of a water-splitting catalyst (aluminum hydroxide nanoparticles) into the porous ion-exchange resin bed. To the best of our knowledge, this is the first time a water dissociation catalyst has been implemented in the ion-exchange resin bed for EDI. The water dissociation catalyst in bipolar junctions pre-polarizes water making it easier to split into hydronium and hydroxide ion charge carriers under applied electric fields via the second Wien effect. The new molecularly layered Janus RWs demonstrate both satisfactory water-splitting and salt removal in bench scale EDI setups and these materials may improve, or even supplant, existing bipolar membrane electrodialysis units that currently necessitate large electrolyte feed concentrations.
4 June 2020 in Journal of Materials Chemistry A
Polymer electrolytes are found at the heart of numerous electrochemical technologies involved in energy storage, conversion and separations. An important property of these materials is their partitioning behavior of ions in aqueous solutions and its effect on the activity of the ions within the polymer electrolyte. In this work, the fraction of condensed counterions (fc) were quantified in nanostructured block copolymer electrolyte (BCE) thin films with new and established experimental techniques. The transition between the osmotic-controlled regime and condensation-controlled regime in BCEs was identified using environmental GI-SAXS and solution uptake measurements via a quartz crystal microbalance (QCM). Further, the activity coefficients of ions in thin film BCEs were quantified experimentally and these values matched predictions from Manning's theory of counterion condensation if the average distance between fixed charges on the polymer chains were determined accurately. Classical molecular dynamics simulations were also performed to assess counterion condensation and ionic conductivity values. The simulations showed large fc values in the BCE – agreeing with results from GI-SAXS and QCM. Because a holistic approach was adopted, it was uncovered that fc can vary significantly depending on the experimental method and analysis deployed. Interestingly, ionic conductivity measurements of the BCE thin films with aqueous solutions and humidified vapor revealed that solvation is critical for breaking ion pairs, and that the notion of two distinct counterion types, condensed and non-condensed, may not be the most accurate picture despite the utility of Manning's theory for accurately predicting the activity coefficient of ions in polymer electrolytes.
13 May 2021 in Materials Advances
PAPolyxeni P. Angelopoulou
+1
Ionomer electrode binders are important materials for polymer electrolyte membrane (PEM) fuel cells and electrolyzers and have a profound impact on cell performance. Herein, we report the effect of two different types of high-temperature (HT) ionomers, characterized as thin films (∼10 nm), on hydrogen oxidation/evolution reaction (HOR/HER) kinetics and hydrogen permeability using interdigitated electrode (IDE) platforms decorated with nanoscale platinum electrocatalysts. The two different ionomers studied were poly(tetraflurostyrene phosphonic acid-co-pentafluorostyrene) (PTFSPA) and quaternary benzyl pyridinium poly(arylene ether sulfone) imbibed with phosphoric acid (QPPSf-H3PO4). The reaction kinetics and limiting current values observed with thin film ionomers on IDEs were commensurate to the values observed in electrochemical hydrogen pumps (ECHPs) that use the ionomers as electrode binders. Using PTFSPA as the binder, an HT-PEM ECHP showed 1 A cm−2 at 55 mV when using 2 mgPt cm−2 in the membrane electrode assembly.
22 April 2021 in RSC Advances
Herein, a systematic study where the macromolecular architectures of poly(styrene-block-2-vinyl pyridine) block copolymer electrolytes (BCE) are varied and their activity coefficients and ionic conductivities are compared and rationalized versus a random copolymer electrolyte (RCE) of the same repeat unit chemistry. By performing quartz crystal microbalance, ion-sorption, and ionic conductivity measurements of the thin film copolymer electrolytes, it is found that the RCE has higher ionic activity coefficients. This observation is ascribed to the fact that the ionic groups in the RCE are more spaced out, reducing the overall chain charge density. However, the ionic conductivity of the BCE is 50% higher and 17% higher after the conductivity is normalized by their ion exchange capacity values on a volumetric basis. This is attributed to the presence of percolated pathways in the BCE. To complement the experimental findings, molecular dynamics (MD) simulations showed that the BCE has larger water cluster sizes, rotational dynamics, and diffusion coefficients, which are contributing factors to the higher ionic conductivity of the BCE variant. The findings herein motivate the design of new polymer electrolyte chemistries that exploit the advantages of both RCEs and BCEs.