29 June 2020 in Nature Catalysis
15 May 2024 in Journal of the American Chemical Society
So-called Z-scheme systems, which typically comprise an H2 evolution photocatalyst (HEP), an O2 evolution photocatalyst (OEP), and an electron mediator, represent a promising approach to solar hydrogen production via photocatalytic overall water splitting (OWS). The electron mediator transferring photogenerated charges between the HEP and OEP governs the performance of such systems. However, existing electron mediators suffer from low stability, corrosiveness to the photocatalysts, and parasitic light absorption. In the present work, carbon nanotubes (CNTs) were shown to function as an effective solid-state electron mediator in a Z-scheme OWS system. Based on the high stability and good charge transfer characteristics of CNTs, this system exhibited superior OWS performance compared with other systems using more common electron mediators. The as-constructed system evolved stoichiometric amounts of H2 and O2 at near-ambient pressure with a solar-to-hydrogen energy conversion efficiency of 0.15%. The OWS reaction was also promoted in the case that this CNT-based Z-scheme system was immobilized on a substrate. Hence, CNTs are a viable electron mediator material for large-scale Z-scheme OWS systems.
12 October 2023 in Angewandte Chemie International Edition
Photocatalytic water splitting is a simple means of converting solar energy into storable hydrogen energy. Narrow‐band gap oxysulfide photocatalysts have attracted much attention in this regard owing to the significant visible‐light absorption and relatively high stability of these compounds. However, existing materials suffer from low efficiencies due to difficulties in synthesizing these oxysulfides with suitable degrees of crystallinity and particle sizes, and in constructing effective reaction sites. The present work demonstrates the production of a Gd 2 Ti 2 O 5 S 2 ( λ <650 nm) photocatalyst capable of efficiently driving photocatalytic reactions. Single‐crystalline, plate‐like Gd 2 Ti 2 O 5 S 2 particles with atomically ordered surfaces were synthesized by flux and chemical etching methods. Ultrafine Pt‐IrO 2 cocatalyst particles that promoted hydrogen (H 2 ) and oxygen (O 2 ) evolution reactions were subsequently loaded on the Gd 2 Ti 2 O 5 S 2 while ensuring an intimate contact by employing a microwave‐heating technique. The optimized Gd 2 Ti 2 O 5 S 2 was found to evolve H 2 from an aqueous methanol solution with a remarkable apparent quantum efficiency of 30 % at 420 nm. This material was also stable during O 2 evolution in the presence of a sacrificial reagent. The results presented herein demonstrates a highly efficient narrow‐band gap oxysulfide photocatalyst with potential applications in practical solar hydrogen production.
12 September 2023 in Angewandte Chemie International Edition
Photocatalytic water splitting is an ideal means of producing hydrogen in a sustainable manner, and developing highly efficient photocatalysts is a vital aspect of realizing this process. The photocatalyst Y2Ti2O5S2 (YTOS) is capable of absorbing at wavelengths up to 650 nm and exhibits outstanding thermal and chemical durability compared with other oxysulfides. However, the photocatalytic performance of YTOS synthesized using the conventional solid‐state reaction (SSR) process is limited owing to the large particle sizes and structural defects associated with this synthetic method. Herein, we report the synthesis of YTOS particles by a flux‐assisted technique. The enhanced mass transfer efficiency in the flux significantly reduced the preparation time compared with the SSR method. In addition, the resulting YTOS showed improved photocatalytic H2 and O2 evolution activity when loaded with Rh and Co3O4 co‐catalysts, respectively. These improvements are attributed to the reduced particle size and enhanced crystallinity of the material as well as the slower decay of photogenerated carriers on a nanosecond to sub‐microsecond time range. Further optimization of this flux‐assisted method together with suitable surface modification is expected to produce high‐quality YTOS crystals with superior photocatalytic activity.
13 January 2025 in Journal of Materials Chemistry A
The Y2Ti2O5S2 have been prepared by using carbon disulfide (CS2) as a sulfurizing reagent in the presence of a flux, which represents a new approach to the synthesis of oxysulfide photocatalysts in a manner that may be suitable for mass production.
12 October 2023 in Angewandte Chemie
Photocatalytic water splitting is a simple means of converting solar energy into storable hydrogen energy. Narrow‐band gap oxysulfide photocatalysts have attracted much attention in this regard owing to the significant visible‐light absorption and relatively high stability of these compounds. However, existing materials suffer from low efficiencies due to difficulties in synthesizing these oxysulfides with suitable degrees of crystallinity and particle sizes, and in constructing effective reaction sites. The present work demonstrates the production of a Gd 2 Ti 2 O 5 S 2 ( λ <650 nm) photocatalyst capable of efficiently driving photocatalytic reactions. Single‐crystalline, plate‐like Gd 2 Ti 2 O 5 S 2 particles with atomically ordered surfaces were synthesized by flux and chemical etching methods. Ultrafine Pt‐IrO 2 cocatalyst particles that promoted hydrogen (H 2 ) and oxygen (O 2 ) evolution reactions were subsequently loaded on the Gd 2 Ti 2 O 5 S 2 while ensuring an intimate contact by employing a microwave‐heating technique. The optimized Gd 2 Ti 2 O 5 S 2 was found to evolve H 2 from an aqueous methanol solution with a remarkable apparent quantum efficiency of 30 % at 420 nm. This material was also stable during O 2 evolution in the presence of a sacrificial reagent. The results presented herein demonstrates a highly efficient narrow‐band gap oxysulfide photocatalyst with potential applications in practical solar hydrogen production.