Wai Yan Yong

Wai Yan Yong

Auto-generated profile, based on publicly available information

Wai Yan Yong

Department of Electrical Engineering, University of Twente, Enschede, The Netherlands

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 March 2018 in IEEE Access
Verified
Journal Article
Open access
WYWai Yan Yong
Wai Yan Yong
SRSharul Kamal Abdul Rahim
Sharul Kamal Abdul Rahim
Mohamed HimdiMohamed Himdi
Mohamed Himdi
FSFauziahanim Che Seman
Fauziahanim Che Seman
DSDing Lik Suong
Ding Lik Suong
HEHusameldin Abdelrahman Elmobarak
Husameldin Abdelrahman Elmobarak
A flexible and low profile frequency selective surface (FSS) with bandstop behavior for X-band signals is demonstrated in this paper to support the demand of the flexible wireless communication devices in the today's market. The resonating element of the FSS is realized using the convoluted ring loop element that is inspired by the conventional ring loop element. An additional of four stubs are added at each 90° of the conventional ring loop to miniaturize its overall dimension. The convoluted ring loop FSS has reduced the overall dimension of the conventional ring shape FSS to 0.25 λ0 with a reduction of 33%. The proposed FSS is developing by utilizing the flexible polyethylene terephthalate substrate with the measured thickness of 0.125 mm and dielectric constant of 2.7. From the simulated transmission response of the FSS, it shows that the proposed convoluted ring loop FSS with planar feature manages to provide a signal attenuation up to 37 dB at 10 GHz for both normal and oblique angle of incidence up to 45° at TE and TM polarization. For validation purpose, the prototype of the FSS is manufactured using the inkjet printing technique. The FSS is bent in a different manner, such as bending the array FSS with different radius and bending the unit cell convoluted ring FSS row by row, to examine the bending effect toward the transmission response performance. All the simulated results are compared with the measured results, and these results are in concurrence with each other. By having the conformal features, the employability of the FSS is enhanced whereby the proposed flexible FSS can be employed as the sub-reflector for wearable antenna and conformal shields for electromagnetic compatibility applications.

10 July 2023 in IEEE Access
Verified
Journal Article
Open access
WYWai Yan Yong
Wai Yan Yong
AVAbbas Vosoogh
Abbas Vosoogh
ABAlireza Bagheri
Alireza Bagheri
CVCoen Van De Ven
Coen Van De Ven
AHAbolfazl Hadaddi
Abolfazl Hadaddi
AGAndrés Alayón Glazunov
Andrés Alayón Glazunov
The millimeter-wave (mmWave) and sub-terahertz (sub-THz) bands have received a lot of attention in recent years for wireless communication and high-resolution imaging radar applications.The objective of this paper is to provide an overview of recent developments in the design and technical implementation of GW-based antenna systems and components. This paper begins by comparing the GW-transmission line to other widely used transmission lines for the mmWave and sub-THz bands. Furthermore, the basic operating principle and possible implementation technique of the GW-technology are briefly discussed. In addition, various antennas and the passive components have been developed based on the GW-technology. Despite its advantages in controlling electromagnetic wave propagation, it is also widely used for the packaging of electronics components such as transceivers and power amplifiers. This article also provided an overview of the current manufacturing technologies that are commonly used for the fabrication ofGW-components. Finally, the practical applications and industry interest inGWtechnology developments for mmWave and sub-THz applications have been scrutinized.

3 February 2020 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MHMaxime HARNOIS
Maxime HARNOIS
Mohamed HimdiMohamed Himdi
Mohamed Himdi
WYWai Yan Yong
Wai Yan Yong
SRSharul Kamal Abdul Rahim
Sharul Kamal Abdul Rahim
KTKarim Tekkouk
Karim Tekkouk
NCNicolas Cheval
Nicolas Cheval
Manufacturing an array of high-quality metallic pattern layers on a dielectric substrate remains a major challenge in the development of flexible and 3-D frequency selective surfaces (FSS). This paper proposes an improved fabrication solution for the 3-D FSS based on water transfer printing (WTP) technology. The main advantages of the proposed solution are its ability to transform complicated 2-D planar FSS patterns into 3-D structures while improving both manufacturing quality and production costs. WTP technology makes use of water surface tension to keep the thin metallic patterns of the proposed FSS floating flat with the absence of a solid planar substrate. This feature enables these metallic FSS patterns to be transferred onto 3-D structures through a dipping process. To test the effectiveness of the proposed technique, the FSS was designed using computer simulation software Microwave Studio to obtain the numerical performance of the FSS structure. The WTP technology was then used to fabricate the proposed FSS prototype before its performance was tested experimentally. The measurement results agreed well with the numerical results, indicating the proposed manufacturing solution would support the development of complicated 3-D electronics devices, such as conformal antenna arrays and metamaterials.

9 September 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
WYWai Yan Yong
Wai Yan Yong
AHAbolfazl Haddadi
Abolfazl Haddadi
TEThomas Emanuelsson
Thomas Emanuelsson
AGAndrés Alayón Glazunov
Andrés Alayón Glazunov
A bandwidth-enhanced 8 × 8 cavity-backed slot array antenna for fixed beam applications is presented. The antenna consists of four 2 × 2 subarrays fed by ridge gap waveguide and a modified bow-tie coupling slot in the cavity layer. The proposed bow-tie coupling slot provides additional 10% impedance bandwidth as compared to the traditional rectangular coupling slot. The fabricated prototype demonstrates an |S 11 | ≤ -10 dB fractional impedance bandwidth and a 3 dB gain-drop bandwidth of approximately 28% and 25%, respectively, with peak gain of 26.4 dBi, aperture efficiency > 60% and cross-polar discrimination > 40 dB. Measurements show good agreement with simulations. Moreover, we show the impact of the dimensions and shape of the cavity coupling slot on the bandwidth enhancement. The bandwidth enhancement is explained by the double-ridge slot behavior of the bow-tie coupling slot, which shows a more wideband behavior than the traditional rectangular coupling slot behaving like a cross section of a waveguide.

16 June 2023 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
WYWai Yan Yong
Wai Yan Yong
AGAndrés Alayón Glazunov
Andrés Alayón Glazunov
This article presents a miniaturized all-metallic bandpass frequency selective surface (FSS) for millimeter-wave (mmWave) applications. The designed FSS is realized as a slot-type element that can be easily incorporated into all-metallic device architectures. The miniaturization is achieved by a convoluted or meander slot structure, i.e., a miniaturization technique borrowed from conventional substrate-based FSS design. It is demonstrated that the proposed FSS element provides a stable and wide bandpass performance from 24.9 to 31.4 GHz for both the transverse electric (TE) and the transverse magnetic (TM) polarizations at the broadside direction ( $\theta = 0^{\circ }$ ). Adequate performance is maintained at oblique incidence angles up to $\theta = \pm \,45^{\circ }$ . A 25 × 25-elements FSS array prototype has been manufactured using the cost-effective chemical etching technique and experimentally characterized utilizing a free-space measurement setup. The results demonstrate a remarkably good correlation between simulations and measurements. Hence, the proposed miniaturized FSS represents an excellent potential to realize an all-metallic FSS with low insertion loss, low profile, and wideband performance at low fabrication costs for mmWave applications.

25 October 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
WYWai Yan Yong
Wai Yan Yong
AHAbolfazl Hadaddi
Abolfazl Hadaddi
AGAndrés Alayón Glazunov
Andrés Alayón Glazunov
This paper presents a bandpass frequency selective surface (FSS) radome based on fully metallic gap waveguide (GW) technology. The element of the proposed FSS radome consists of a conventional cross-dipole slot etched on metallic plates and positioned over a groove GW cavity. A design with a single GW cavity layer was initially produced which was later optimised for performance, to comprise a dual GW cavity layer, while considering both functionality and manufacturability. It is shown that the proposed FSS element offers a stable and wide bandpass (from 26-30 GHz) performance in the broadside direction for both transverse electric (TE) and transverse magnetic (TM) polarizations. For oblique angle of incidence, the suggested FSS element works up to 30° with a reduction in usable bandpass bandwidth performance to 26-28 GHz for both TE and TM polarizations. A 20 × 20-element GW-FSS array prototype has been fabricated and measured, which was integrated with a fixed beam array antenna to further validate its functionality as a filtering radome. The findings show an excellent agreement between simulations and measurements. Hence, the proposed GW-FSS represents a great opportunity to develop a all-metallic FSS with low insertion loss, sharp-roll-off filtering, wideband performance and inexpensive fabrication cost.