This paper presents an advanced 2.3-2.8 GHz fully-integrated digital-intensive polar Doherty transmitter realized in 40nm standard CMOS. The proposed architecture comprises CORDIC, digital delay aligners, interpolators, digital pre-distortion (DPD) circuitry in combination with frequency-agile wideband phase modulators followed by the digital main and peak power amplifier (PA) operating in quasi-load insensitive class-E using an on-chip power combiner. At 2.5 GHz, its maximum output power is +21.4 dBm. Drain efficiency is 49.4% at peak power, and 33.7% at 6-dB power back-off. Applying DPD for a 20-MHz 64-QAM signal, the measured EVM is better than -30 dB while the average drain efficiency is 24%.
30 October 2019 in IEEE Solid-State Circuits Letters
This paper presents a wideband linear direct-digital RF modulator (DDRM) in 40-nm CMOS technology. An innovative I/Q-interleaving RF digital-to-analog converter (DAC) is proposed to enable the combination of in-phase (I) and quadrature (Q) signals in a more digital fashion, thereby improving the linearity performance at large bandwidths. The DDRM also features an advanced second-order hold digital interpolation filter to suppress the sampling spectral replicas in the presence of large bandwidth signals. Moreover, the harmonic rejection technique in the context of RF DAC operation is adopted and implemented. The 2 x 9-bit DDRM core occupies 0.21 mm² and consumes 110 and 146 mW at 1 and 3 GHz, respectively, with the peak power of +9.2 dBm. The error vector magnitude (EVM) and adjacent channel power ratio (ACPR) at 3 GHz for a 57-MHz 64-QAM signal are better than -30 and -45 dB, respectively, and ACPR remains as low as -44 dBc up to a wide bandwidth of 113 MHz.
Recently, digital transmitters (DTXs) that feature arrays of controlled digital PA (DPA) cells have become increasingly popular since they directly benefit from nanoscale CMOS technology, yielding reduced die area and highly efficient operation [1] –[6]. For wideband applications, I/Q DTXs are considered superior over their polar counterparts due to their linear I/Q operation, which avoids bandwidth expansion. Nevertheless, I/Q DTXs can suffer from the interaction between their I and Q paths, especially at higher power levels, giving rise to an I/Q image and nonlinearity. To tackle this issue, an IQ interleaved upconverter has been introduced [1]. However, its 25%-LO requirement restricts the operational frequency to below 5GHz. The diamond-shaped mapping technique, presented in [2], uses 50% LOs and a different I and Q combining method but suffers from nonlinearity due to a clipping operation. Besides, the large peak-to-average power ratio (PAPR) in modern wireless standards requires the DTX to operate in deep power back-off (DPBO), degrading its average efficiency. To target applications requiring large modulation bandwidth, high spectral purity and average efficiency, we present a DTX with a signed IQ interleaved upconversion approach based on 50%-LO clock distribution, which enables close to perfect orthogonal I/Q summation. To enhance its average efficiency, a compact, 4-way Doherty DPA architecture is introduced.