Sufei Li

Sufei Li

Auto-generated profile, based on publicly available information

Sufei Li

Electrical Engineering, Georgia Institute of Technology, 1372 Atlanta, Georgia United States 30313

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2019 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SLSufei Li
Sufei Li
SZShen Zhang
Shen Zhang
THThomas G. Habetler
Thomas G. Habetler
RHRonald G. Harley
Ronald G. Harley

4 April 2018 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SLSufei Li
Sufei Li
NGNoris A. Gallandat
Noris A. Gallandat
JMJames Rhett Mayor
James Rhett Mayor
THThomas G. Habetler
Thomas G. Habetler
RHRonald G. Harley
Ronald G. Harley
The significant losses in the end components due to leakage flux excited by the armature and field end windings can result in partial overheating, and are important for the design of large synchronous generators. This paper describes a method based on 3-D transient finite-element analysis (FEA) to determine the fields and losses in the generator end region. Taking the nonlinear and anisotropic properties and the induced in-plane eddy currents in stator into consideration, the electromagnetic field and loss distributions in the end region are calculated. The method is validated by the agreement between the temperatures predicted by a corresponding 3-D thermal FEA and the temperatures obtained from a physical measurement at different locations in the generator end region. Then, the field and loss distributions in the end components in the open-circuit test condition short-circuit test condition and rated apparent power with a 0.85 lagging power factor, a unity power factor, and a 0.95 leading power factor conditions are analyzed and compared using the proposed 3-D transient FEA method.

13 January 2020 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
CGCheng Gong
Cheng Gong
SLSufei Li
Sufei Li
THThomas Habetler
Thomas Habetler

1 October 2020 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
CGCheng Gong
Cheng Gong
SLSufei Li
Sufei Li
THThomas Habetler
Thomas Habetler
PZPing Zhou
Ping Zhou
High-speed switched reluctance machines (SRMs) have been a timely topic recently. However, for ultra-high-speed SRMs over 100,000 rpm, the acoustic noise is a significant issue in many applications such as high speed spindles, compressors/ turbochargers, flywheels and etc. In this paper, a multi-physics acoustic modeling of ultra-high-speed SRMs is presented based on finite element analysis (FEA). First, a 3D electromagnetic FEA is conducted to calculate the radial force on the stator teeth. Then, a modal analysis and a harmonic response analysis are shown in the frequency domain to estimate the natural frequencies and vibration of the whole motor. An acoustic response analysis is done to estimate the sound pressure level (SPL) using the superposition of the surface vibration. To verify the model, experiments are done to measure and compare the natural frequencies and the SPL of a 4/2 ultra-high-speed SRM at 100,000 rpm. The results show that the SPL of the motor is as high as 115 dB at 10 mm away from the motor, which matches the simulation result (113 dB) well. The impact of the bearing is proven to be negligible compared with the noise generated by the radial force. Finally, a parametric study example of using the proposed model to guide the design of SRMs has been conducted. It is shown that "hot dog" shaped motors have less noise than "pancake" shaped motors under the same motor volume, speed and power.

30 August 2018 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
CGCheng Gong
Cheng Gong
SLSufei Li
Sufei Li
THThomas Habetler
Thomas Habetler
JRJose Alex Restrepo
Jose Alex Restrepo
BSBrian Soderholm
Brian Soderholm
High speed switched reluctance machines (SRMs) are gaining popularity in both academia and industrial communities. One of the reasons that limit the maximum speed of SRMs is the speed limit of commercial rotary encoders due to mechanical considerations. In this paper, a novel direct position control for ultra-high speed SRMs is proposed based on non-intrusive reflective sensors. It uses reflective optical sensors to detect the relative position between the rotor and the stator so as to control the on and off states of the switches directly through the analog output trigger signals generated by the optical sensors. In order to generate the maximum output torque, the switching-on and -off angles are optimized based on the equivalent Simulink model with the torque and flux linkage characteristics obtained from a corresponding finite element analysis (FEA) of a high speed SRM. Finally, the proposed method is validated by experiments with a 500 W 4/2 SRM running up to 100,000 rpm. The proposed control system has many advantages such as low cost and virtually no speed limit, which makes it suitable for ultra-high speed applications.

2 November 2018 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SLSufei Li
Sufei Li
SZShen Zhang
Shen Zhang
CGCheng Gong
Cheng Gong
THThomas G. Habetler
Thomas G. Habetler
RHRonald G. Harley
Ronald G. Harley
Accurate prediction of the phase inductance of switched reluctance machines (SRMs) is of crucial importance at the design stage because it is a key parameter to estimate the performance indices such as the torque and loss. Instead of using the popular but time-consuming finite element analysis (FEA) or the methods that require prior knowledge of magnetic fields from an FEA such as function approximation and flux path methods, this paper proposes a novel fast and accurate analytical approach to determine the phase inductance of an SRM by solving the partial differential equations of magnetic potentials based on Maxwell's equations. In particular, an enhancement of the accuracy of the analytical model is accomplished by applying conformal mappings that deal with the non-radial/non-peripheral geometric structures when calculating the air-region permeance parameters. Moreover, a magnetic circuit network is applied to account for the steel saturation effects. The close agreement between the results of the proposed analytical method, FEAs and experimental measurements validates the analysis.