1 September 2021 in Journal of Non-Crystalline Solids
23 January 2023 in IEEE Electron Device Letters
Antimony films and devices based on polyether-ether-ketone (PEEK) flexible substrates were fabricated. After bending at different radii for 24 hours, the antimony film still achieved a complete phase transition after heating. When the bending cycle was more than 10000 times, the resistance difference between amorphous and crystalline states kept more than one order of magnitude. With the increase of bending times, grains tended to be refined, resulting in a wider band gap. The good ductility of antimony film made it have small resistance drift in tensile state. The reversible SET and RESET operations were realized in bending phase change memory device. Antimony films based on PEEK substrates had great potential applications in flexible phase change memories.
25 June 2025 in ACS Applied Electronic Materials
14 September 2026 in Applied Physics Letters
In this Letter, we propose high thermal stability GeTe and Cu conductive filament (CF) nanoheater-based flexible phase change memory (FPCM) devices on polyimide substrates. The GeTe films exhibit a rapid phase transition after bending up to 20 000 times at a radius of 25 mm. Compared to unbent films, there are no obvious changes in resistance drift coefficient, optical bandgap, crystal structure, and surface morphology. The electrothermal simulations confirm that the formation of a Cu CF can significantly increase the heating efficiency (∼1220 K). Assisted by a Cu CF nanoheater, flexible devices achieve stable SET/RESET operations with a large contact area (∼2 × 2 μm2), maintaining a stable amorphous/crystalline resistance ratio (∼102) after 1000 times bending at a radius of 10 mm. This study demonstrates the excellent mechanical stability of flexible GeTe films and the feasibility of Cu CF nanoheater-based FPCM devices, constituting powerful evidence for flexible electronic applications.
31 July 2026 in Nano Letters
12 February 2026 in SSRN Electronic Journal
Flexible memory is a key component for next-generation wearable electronic systems. Among various candidates, flexible phase-change memory (PCM) stands out for its potential, yet its practical development is hindered by slow operation speed, not satisfied endurance, and limited mechanical robustness. Here, we report a multifunction flexible vertical gradient crossbar device on polyimide substrates, which is enabled by a dual-strategy that integrates carbon-doped SbTe (CST) films and Ag electrodes. In the dual-strategy, CST fulfils thermal stability improvment and grain size refinement, while Ag electrodes offer localized filamentary Joule heating and naturally excellent ductility. This synergistic design renders ultrafast switching (5 ns), record-high endurance (2× 105 cycles), and stable operation after more than 6000 bending cycles. Furthermore, CST films maintain complete phase transitions and clear resistance contrast after 50000 outward and inward bending cycles, and exhibit reversible resistance responses under stretching as well as wrist and elbow dynamic deformation. These results provide a new strategy for designing flexible in-memory sensing, wearable and intelligent electronic systems.