8 March 2017 in IEEE Transactions on Power Electronics
In this paper, a voltage balance control strategy based on dual active bridge (DAB) dc/dc converters in a power electronic traction transformer (PETT) is proposed. Based on this strategy, the output-parallel DAB converters can be equivalent to an input-series-output-parallel system. Furthermore, a PETT starting control method is put forward, which can effectively avoid risks of overcurrent and overvoltage in the PETT starting process. In order to carry out the controller design and system stability analysis, three different kinds of mathematical models of DAB converters are set up. The first model is related to a single DAB converter, the second model reflects the equivalent relation between an output-parallel DAB system and a single DAB converter in terms of the output-voltage control loop, and the third model indicates that the voltage balance control system based on DAB converters is a multiinput-multioutput system. Due to the nonzero off-diagonal elements of the controlled plant, there is a mutual effect between different control loops, which is defined as “interaction” in the multivariable feedback control theory. The stability of the voltage balance control system is made up of two parts, including the stability of each single-input-single-output (SISO) control loop and the influence of the interaction on the system stability. The research is carried out to measure the intensity of the interaction in this paper, and a criterion directly based on the controlled plant is proposed to predict the influence of the interaction, which can obviously simplify the system stability analysis. Considering the particular traction onboard application, a new control structure toward the voltage balance controller is introduced. Based on the new structure, the controller is designed and the stability of the SISO system is analyzed. Finally, a five-cell PETT prototype with rated power of 30 kW is taken to carry out further research, and the experiment results verify the effectiveness and correctness of the proposed algorithms.
1 June 2018 in IEEE Transactions on Power Electronics
This paper proposes a novel DC power electronic transformer (DCPET) topology for locomotive, AC/DC hybrid grid, DC distribution grid and other isolated medium-voltage and high-power applications. Compared with conventional PET topology, the proposed DCPET has fewer power semiconductor devices and high-frequency isolation transformers, which can improve the power density and reliability. Fault handling or redundancy design can be achieved to further improve the reliability when some DC-DC modules break down. In addition, input voltage sharing (IVS) control can be omitted to simplify the control system and improve the stability. Meanwhile, soft switching is guaranteed for all the switches, which is beneficial to increase switching frequency and improve power density. In this paper, the principle, evolution, and control of the proposed DCPET are respectively presented and studied in detail. Finally, a prototype of the proposed DCPET is built and the experimental results verify the validity and superiority of the proposed topology.
9 September 2019 in IEEE Transactions on Industrial Electronics
A dual active-bridge (DAB) dc-dc converter is widely used in bidirectional high-power conversion, such as renewable energy system or train traction system. The open-circuit fault of DAB may threaten the system safety operation and should be eliminated in time. In this article, each fault mode of DAB is analyzed in detail. The transient operations and the load-carrying capacity are carefully analyzed. Based on the analysis, a DAB fault-tolerant method called “primary-side lower power secondary-side bypass arm” (PLP-SBA) is proposed. When the fault occurs in the primary side, the power of DAB is cut down, and when the fault occurs in the secondary side, the entire fault bridge arm is bypassed. The PLP-SBA method can ensure a certain load-carrying capacity after an open-circuit fault. A 5-kW DAB experimental platform is built to verify the correctness and effectiveness of the DAB mode analysis and PLP-SBA method.
21 December 2018 in IEEE Transactions on Power Electronics
Solid-State transformer for onboard traction application is also addressed as power electronic traction transformer (PETT), which is used to replace the line frequency traction transformer and four-quadrant converter to further improve efficiency, save installation space, and reduce weight of the onboard equipment. However, based on the conventional PETT configuration with the modular series-parallel structure, it is hard to guarantee the high efficiency and high power density at the same time due to the limitations caused by the switching characteristics of the semiconductor devices, transformer design, and high-voltage insulation design. To deal with the mentioned problem, a PETT configuration and the parameters' design method for onboard traction application are proposed in this paper to replace the conventional dc/dc stage with the low-voltage insulated gate bipolar translator (IGBTs). By using the proposed configuration, the high-voltage IGBTs can be replaced by the low-voltage IGBTs, which can help reduce switching loss. Meanwhile, zero-current switching or zero-voltage switching for all the IGBTs can be guaranteed, and the number of the medium-frequency transformers (MFTs) will not increase. Therefore, a multiple optimization of PETT, including switching losses, the number of MFTs and switches, and costs, can be finally achieved. Finally, an experimental prototype is built to verify the performance of the proposed PETT configuration.
23 February 2018 in IEEE Transactions on Industrial Electronics
An LLC-LC type bidirectional control strategy for an LLC resonant converter is proposed in this paper. It can achieve bidirectional power flow automatically without any power flow detection procedures. Meanwhile, the soft-switching can be always guaranteed all the time. In order to adapt to the proposed control strategy, a no-load-point-based design method is put forward in this paper, which can rapidly obtain optimal parameters of an LLC resonant converter. What is more, by using the proposed control strategy, the starting characteristic in no-load condition can be improved, output voltage rising and current surge risk can be avoided. Finally, an experimental platform of power electronic traction transformer power cell (consisting of a single-phase rectifier and a bidirectional LLC resonant converter) is built to verify the validity of the proposed control strategy.
16 September 2019 in IEEE Transactions on Power Electronics
This paper proposes a new auxiliary power supply (APS), which is used to feed the controllers, drivers, and sensors of the sub-modules for medium-/high-voltage and high-power solid state transformer (SST). In medium-/high-voltage and high-power applications, the APS is usually connected to the dc bus of the sub-module to obtain electric energy. The voltage of the sub-module's dc bus is often as high as several thousand volts, so that the APS must have the ability to handle such high input voltage. An input-series capacitor structure, which makes the voltage stress of the power semiconductor devices reduced, is adopted in the proposed APS. Therefore, the high input voltage can be handled by the low voltage power semiconductor devices. Furthermore, the input voltage sharing (IVS) can be achieved without any special control strategy, which makes the control system simplified and the stability improved. Meanwhile, zero-current switching (ZCS) is guaranteed for all the switches, so that the power density and efficiency can be improved. Finally, the simulation model and prototype are built, by which the feasibility and effectiveness of the proposed APS are verified.