Christoph Messmer

Christoph Messmer

Auto-generated profile, based on publicly available information

Christoph Messmer

Fraunhofer Institute for Solar Energy Systems ISE Freiburg Germany

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 November 2020 in Progress in Photovoltaics: Research and Applications
Verified
Journal Article
Open access
PDF file
CMChristoph Messmer
Christoph Messmer
BGBaljeet S. Goraya
Baljeet S. Goraya
SNSebastian Nold
Sebastian Nold
PSPatricia S.C. Schulze
Patricia S.C. Schulze
VSVolker Sittinger
Volker Sittinger
MHMartin Hermle
Martin Hermle
Perovskite–silicon tandem solar cells have shown a rapid progress within the past 5 years in terms of their research cell efficiency and are currently being investigated as candidates for the next generation of industrial PV devices. This raises the question of which silicon bottom cell will be most suitable for tandem application. Currently, the silicon heterojunction (SHJ) technology dominates in tandem research achieving world records. However, it is an open issue of how to transfer these research results to industrial mass production, which is driven by cost reduction and resource efficiency and includes challenges like upscaling and long‐term stability. Therefore, it is highly relevant for the PV industry to get reliable and predictive estimates on the efficiency and cost potential, as well as technologically feasible solutions. In this work, we elaborate on silicon bottom cell concepts based on the PERC, TOPCon, and SHJ technology combined with two different interconnection concepts. For each tandem device, the efficiency potential is investigated by means of an experimentally validated simulation model. Second, we evaluate the bottom cell concepts in terms of all‐in cell costs per piece. Bringing the efficiency potential and cost evaluation together allows us to assess the different tandem cell concepts in terms of all‐in module cost per watt peak. Our results show that perovskite–silicon tandem devices are promising candidates to significantly reduce the levelized cost of electricity and, in particular, that the “race” for the best silicon bottom cell is still open to all the investigated bottom cell technologies.

30 October 2025 in Science
Verified
Journal Article
Closed access
OEOussama Er-Raji
Oussama Er-Raji
CMChristoph Messmer
Christoph Messmer
RPRakesh R. Pradhan
Rakesh R. Pradhan
OFOliver Fischer
Oliver Fischer
VHVladyslav Hnapovskyi
Vladyslav Hnapovskyi
SGStefan W. Glunz
Stefan W. Glunz
Reducing charge carrier transport losses, improving selectivity, and minimizing nonradiative recombination are essential for enhancing the efficiency and stability of perovskite/silicon tandem solar cells. We used a hybrid two-step perovskite deposition method that is compatible with industry-standard textured silicon, incorporating a perovskite surface treatment based on 1,3-diaminopropane dihydroiodide. The interaction of this molecule with the perovskite surface increased the majority charge carrier concentration at the electron-selective contact, which reduced interfacial recombination. Simultaneously, this field-effect passivation increased the electron concentration across the entire intrinsic perovskite absorber, which increased conductivity and reduced transport losses. Combined, this yields high-performance, fully textured perovskite/silicon tandem solar cells, achieving a 1-sun AM1.5G conversion efficiency of 33.1% with an open-circuit voltage of 2.01 volts and an extended outdoor stability in the Red Sea Coast.

14 February 2018 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
CMChristoph Messmer
Christoph Messmer
MBMartin Bivour
Martin Bivour
JSJonas Schon
Jonas Schon
SGStefan W. Glunz
Stefan W. Glunz
MHMartin Hermle
Martin Hermle
The applicability of different high (low) work function contact materials for the formation of alternative passivating and hole (electron) selective contacts is currently re-explored for silicon solar cells. To assist the engineering of those contacts, which is still in its infancy, numerical device simulations are used to improve knowledge regarding relevant heterojunction and thin film properties with the focus on metal oxide based hole contacts. The importance of 1) a high metal oxide work function for the induced c-Si pn-junction is shown. It is elucidated that for an efficient hole transport from this induced c-Si junction into the external electrode, via the buffer and the metal oxide, 2) the metal oxide's conduction band must be below the valence band of the buffer (or c-Si absorber) for direct band-to-band tunneling, or 3) bulk traps near the valence band edge of the buffer (or c-Si absorber) are needed for trap-assisted tunneling.

19 December 2019 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
CMChristoph Messmer
Christoph Messmer
AFAndreas Fell
Andreas Fell
FFFrank Feldmann
Frank Feldmann
NWNico Wohrle
Nico Wohrle
JSJonas Schon
Jonas Schon
MHMartin Hermle
Martin Hermle
Passivating contacts created via a thin interfacial oxide and a highly doped polysilicon layer, e.g., the TOPCon technology, are on the verge of being implemented in solar cell mass production. Investment decisions rely on R&D to identify the most promising implementation option, meaning a trustworthy roadmap based on predicted performance gains. This article shows how to thoroughly quantify the performance potential via numerical simulation, focusing on an evolutionary upgrade of a busbarless p-type bifacial passivated emitter rear cell (PERC) technology. We specifically highlight the need to consider not only the electrical gains of passivating contacts, but also the associated optical losses due to parasitic absorption in the polysilicon layers for front and rear illumination. The influence of free-carrier absorption in polysilicon on the solar cell optics is characterized on experimental test structures in order to verify our optical simulation model. Introducing TOPCon fully at the rear and also locally aligned to the front fingers can boost the PERC efficiency by approximately 1% $_{\rm abs}$ . The final device is strongly limited by losses in the p-type c-Si bulk and phosphorus-doped front emitter. Consequently, the presented evolutionary TOPCon upgrades may well be of increased relevance for future improved p-PERC cells, as an alternative to the current focus on n-type TOPCon cells with boron emitter.

23 August 2018 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
CMChristoph Messmer
Christoph Messmer
MBMartin Bivour
Martin Bivour
JSJonas Schön
Jonas Schön
MHMartin Hermle
Martin Hermle
Transition metal oxides (TMOs) are of increasing importance for many applications reaching from thin-film transistors and non-volatile memory to novel contact layers in photovoltaics. Due to their tunable electrical properties and high transparency, TMOs are also promising candidates as contact layers in silicon heterojunction solar cells already leading to cell efficiencies of about 22%. However, the current extraction of charge carriers via these thin contact layers is still not fully understood. To assist the engineering of novel silicon heterojunctions, numerical device simulations are used to improve knowledge regarding relevant heterojunction and thin film properties. The efficient current extraction from a silicon absorber is investigated with Sentaurus TCAD for a TMO-based hole contact. It is shown that for an ideal hole extraction from the induced crystalline silicon pn-junction via the amorphous silicon buffer and the TMO into the external metal electrode, two requirements have to be fulfilled: (A) A sufficiently high TMO work function is needed to ensure a high hole conductivity (via a high charge carrier ratio p/n) in the induced pn-junction within the silicon absorber. (B) Extraction of those holes into the TMO calls for efficient trap-assisted tunneling. Experimental evidence for a limitation of hole extraction by (A) and (B) is given for a variety of TMO based hole contacts using molybdenum oxide.

15 November 2023 in Solar RRL
Verified
Journal Article
Open access
OEOussama Er-Raji
Oussama Er-Raji
CMChristoph Messmer
Christoph Messmer
ABAlexander J. Bett
Alexander J. Bett
OFOliver Fischer
Oliver Fischer
SRSebastian Kasimir Reichmuth
Sebastian Kasimir Reichmuth
SGStefan W. Glunz
Stefan W. Glunz
Optimally enhancing the performance of perovskite silicon tandem solar cells comes with accurate identification of loss origins in the device in combination with optoelectrical device simulations assessing the respective efficiency gains to prioritize optimization pathways. Herein, various characterization methods, namely, spectrally resolved photoluminescence (PL), transient‐PL, PL‐based implied open‐circuit voltage (iVOC) imaging, spectrometric characterization, and Suns‐VOC measurements are combined to quantify current density–voltage (jV) photovoltaic metric losses of a fully‐textured perovskite silicon tandem solar cell (26.7% efficiency). The extracted device characteristic parameters are then used as a reference for the comprehensive optoelectrical Sentaurus simulation model which precisely reproduces the experimentally obtained optical and electrical solar cell characteristics, considering mobile ion dynamics. Subsequently, starting from the current device design, the authors alleviate one step at a time the loss constraints and show the impact of each loss channel on the efficiency, identifying the three major ones to be at the: 1) perovskite/C60 interface (−4.6%abs) , 2) the series resistance (−2.9%abs), and 3) light management (−2.1%abs), which limit the VOC, fill factor, and jSC of the device, respectively. Furthermore, it is demonstrated that a practical efficiency potential of 39.5% can be regarded as a practical limit for the presented tandem device architecture.