29 November 2018 in Surface and Interface Analysis
24 May 2019 in SN Applied Sciences
AFAynul Sakinah Ahmad Fauzi
Aynul Sakinah Ahmad Fauzi
+1
4 October 2024 in Separation and Purification Technology
1 November 2021 in Journal of Physics: Conference Series
The lithium-ion battery is promising energy storage that provides proper stability, no memory effect, low self-discharge rate, and high energy density. During its usage, batteries generate heat caused by energy loss due to the transition of chemical energy to electricity and the electron transfer cycle. Consequently, a thermal management system by cooling methods in the battery is needed to control heat. One of the cooling methods is a passive cooling system using a phase change material (PCM). PCM can accommodate a large amount of heat through small dimensions. It is easy to apply and requires no power in the cooling system. This study aims to find the best type of PCM criteria for a Lithium-ion battery cooling system. The research was conducted by simulations using computational fluid dynamics. The variations were using PCM Capric Acid and PCM Hexacosane, with thickness variations of 3 mm, 6 mm, and 9 mm. Hexacosane PCM with 9 mm thickness indicates the best result to reduce heat up to 6.54°K, demonstrating a suitable passive cooling system for Li-ion batteries.
13 July 2020 in Pure and Applied Chemistry
AFAynul Sakinah Ahmad Fauzi
Aynul Sakinah Ahmad Fauzi
+3
Water electrolysis is an environment-friendly process of producing hydrogen with zero-carbon emission. Herein, we studied the water vapor electrolysis using a proton-conducting membrane composed of graphene oxide (GO) nanosheets intercalated with cations (Al3+ and Ce3+). We examined the effect of cation introduction on the physical and chemical structures, morphology, thermal and chemical stabilities, and the proton conductivity of stacked GO nanosheet membranes by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoemission spectroscopy (XPS), Raman spectroscopy, atomic force microscopy (AFM), dynamic light scattering (DLS), thermogravimetric-differential thermal analysis (TG-DTA), and electrochemical impedance spectroscopy (EIS). Concentration cell measurements revealed that the cation-modified membranes are pure proton conductors at room temperature. The proton conductivity of a GO membrane was much improved by cation modification. The cation-modified GO membranes, sandwiched with Pt/C electrodes as the cathode and anode, electrolyzed humidified air to produce hydrogen at room temperature, indicating the feasibility of this carbon-based electrochemical device.
20 October 2025 in ACS Applied Nano Materials
GSGregory Hope Soegiantoro
+7