30 September 2024 in IEEE Transactions on Instrumentation and Measurement
Event camera calibration plays an irreplaceable role in event camera-based visual applications. Event cameras report per-pixel brightness changes as a stream of asynchronous events, making them insensitive to the spatial distribution of feature points. Consequently, traditional methods such as checkerboard and circle calibration algorithms, which rely on spatial intensity distribution for feature point extraction, are ill-suited for event camera calibration. To address this issue, a flexible and accurate event camera calibration method is presented in this work. The method analyzes the frequency characteristics of event data streams, introducing the groundbreaking use of Fourier transform in event camera calibration. Instead of relying on intensity, we extract feature points from the robust phase domain, which mitigates the impact of event camera noise. Event frames are derived from the event data streams, and we recover two crossed phase maps using Fourier transform. Feature points are then detected using the law of phase distribution and refined with sub-pixel accuracy. Subsequently, camera parameters are estimated. The performance of our method was rigorously validated from different perspectives, and the results show that the accuracy of proposed method is substantially improved compared to the conventional methods. The root mean square errors (RMSE) of the proposed method are consistently below 0.06 pixels, with some cases achieving an impressive 0.03 pixels. The accuracy of binocular reconstruction reaches 0.394 mm.
27 May 2023 in Measurement
25 September 2023 in IEEE Transactions on Instrumentation and Measurement
Color phase-shifting profilometry encodes the gray fringe pattern of the conventional three-step phase-shifting algorithm into a single-color image as a means of greatly increasing the measurement speed. However, the color crosstalk problem induces phase errors, which affect the measuring accuracy. In this study, a color crosstalk suppression method based on the equalization of the wrapped phase chord distribution is proposed. By using the wrapped phase value as the polar angle, a chord distribution diagram in the polar coordinate can be obtained. The diagram can be regarded as the distribution of the wrapped phase. Then, the polar angle value is used to equalize the chord distribution. After equalization, a uniform chord distribution diagram is retrieved, and it can be used to recover a new wrapped phase. Nonlinear errors caused by the color crosstalk can be suppressed in a manner that corrected the wrapped phase. This method is a completely software-based method for eliminating color crosstalk, which is more applicable and flexible than conventional methods requiring pre-calibration, the construction of a look-up-table of phase errors or additional patterns. Results of simulations and real experiments indicate the ability of the proposed method to effectively correct the nonlinear errors caused by the color crosstalk.