29 April 2019 in IEEE Transactions on Industrial Electronics
Proton exchange membrane fuel cells are considered as one of the most promising power sources for transportation in the near future. Proper and robust thermal management is a key issue in fuel cell applications. This paper mainly studies the sensor fault detection and isolation and fault tolerant control for the thermal management of proton exchange membrane fuel cell systems. The thermal model of fuel cell is established and analyzed by structure analysis, and the residual generator of sensor faults are designed by Dulmage Mendelsohn decomposition to rearrange the bi-adjacency matrix of the thermal model. A sliding-mode-based active fault tolerant control strategy is proposed for the thermal management of fuel cell systems. The effectivenesses of the proposed fault detection and isolation method and active fault tolerant control strategy are verified on a fuel cell test bench. The experimental results show that the temperature of the proton exchange membrane fuel cell stack can be maintained at the reference value with high accuracy even when sensor fails.
11 May 2020 in IEEE/ASME Transactions on Mechatronics
Power management is a vital technology to increase the economy of fuel cell hybrid vehicles. To overcome the deficiency of most existing optimization approaches, a modified model predictive control-based optimal strategy of power management is proposed for fuel cell hybrid vehicles. Besides, a partial least squares-based load estimation method is utilized to avoid the assumption of conventional model predictive control. Furthermore, an alternating direction multiplier method-based quadratic programming solver is also designed to avoid the ill condition of the quadratic programming. Finally, the reliability and effectiveness of the proposed strategy are demonstrated by the simulation and experiments.
8 December 2020 in IEEE Transactions on Sustainable Energy
Health management can effectively extend the service life of proton exchange membrane fuel cells and reduce the maintenance cost. This paper proposes a health management method for the proton exchange membrane fuel cells based on an active fault tolerant control method. With the advantages of low cost and high speed, a stack voltage model is developed for the condition monitoring. The fast electrochemical impedance spectroscopy measurement is performed when the condition monitoring module detects faults. Then, the distribution of relaxation time is used to extract the characteristics of electrochemical impedance spectroscopy for fault diagnosis. Thereafter, based on the diagnosis results, the performance recovery strategies are incorporated to cope with the faults. This paper adopts three typical fuel cell faults, namely flooding, membrane drying, and air starvation, to demonstrate the effectiveness of the proposed health management. Experimental results show that the proposed health management can realize real-time health monitoring and rapid fault diagnosis, and achieve effective recovery of performance under faulty conditions, thereby significantly improving the reliability of the proton exchange membrane fuel cell system.
27 January 2025 in IEEE Transactions on Transportation Electrification
The proper fault-tolerant control (FTC) is a key issue to extend the lifetime of proton exchange membrane fuel cells (PEMFCs). This article proposes an FTC algorithm to realize performance recovery under flooding. A water transfer model of the PEMFCs is established and verified, and a flooding fault indicator is developed for diagnosing the fault in real time. Thereafter, an active fault-tolerant controller based on the water transfer model and the fault indicator is developed in order to recover the performance characteristics of the PEMFCs. Experimental results show that the proposed fault indicator can accurately identify flooding, and the fault-tolerant controller can effectively suppress the water management failure. Thereby improving the reliability of the PEMFCs.