13 July 2022 in Geophysics
Deep learning neural networks offer some advantages over conventional methods in acoustic impedance inversion. Because labeled data may be difficult to obtain in realistic field data settings, it can be difficult to obtain high-accuracy inversion results. Some generative adversarial network (GAN)-based acoustic impedance inversion methods have been proposed to solve this problem. However, due to the existence of lateral discontinuity in inversion results of these GAN-based methods, inversion accuracy of these proposals is still not fully satisfactory. Therefore, to tackle the shortcomings of GAN, we develop an acoustic impedance inversion method based on dual Wasserstein GAN condition (dual-WGAN-c). Dual-WGAN-c can perform seismic inversion and forward calculation simultaneously and take the low-frequency information of acoustic impedance as conditional input to obtain accurate acoustic impedance inversion results in the case of insufficient labeled data. Through a data simulation experiment, compared with GAN-based seismic acoustic impedance inversion methods, dual-WGAN-c can obtain more accurate inversion results, with high robustness when the seismic data are noisy. Dual-WGAN-c also can obtain accurate results in acoustic impedance inversion of the recorded seismic data when one has insufficient labeled well-log data.
25 October 2015 in Tumor Biology
13 July 2022 in IEEE Transactions on Geoscience and Remote Sensing
Absorption attenuation compensation is an important part of seismic data processing. It enhances the resolution of nonstationary seismic data by compensating the amplitude energy and correcting phase distortion. The stabilized inverse $Q$ -filter method, a widely used attenuation compensation method, constructs compensation operators based on stratigraphy-related assumptions and compensates seismic data using time-window analysis, which is computationally complex and sensitive to noise. The essence of attenuation compensation lies in the establishment of a nonlinear mapping relationship between attenuated and nonattenuated seismic traces, which strongly benefits from deep learning. This article proposes a new method for attenuation compensation based on an end-to-end deep neural network to reduce the handcrafted step of time-window analysis. Instead, the convolutional blocks of the network automatically learn and process seismic data features to achieve simultaneous amplitude and phase compensation. We have constructed two end-to-end network architectures for attenuation compensation: a fully convolutional network (FCN) and a U-Net. As an effective spectrum-broadening method, the compensation method based on the U-Net is shown to enhance vertical resolution with good lateral continuity, to provide reliable compensation results without complex calculations, and to exhibit high noise robustness. Synthetic data tests indicate that the compensation results from the U-Net are better than those from either the FCN or the stabilized inverse $Q$ -filter method at different noise levels. Moreover, the correlation coefficient (CC) between the U-Net compensation results of the synthetic profile and the reference nonattenuated profile is higher than that of the FCN and the stabilized inverse $Q$ -filter method. A field data application further verifies the effectiveness of this method.
17 March 2023 in Surveys in Geophysics
23 March 2023 in IEEE Transactions on Geoscience and Remote Sensing
Neural networks are commonly used for post-stack and pre-stack seismic inversion. With sufficient labelled data, the neural network-based seismic inversion results are more accurate than that use traditional seismic inversion methods. However, in the case of insufficient labeled data, the accuracy of neural networks-based seismic inversion results decreases and is even lower than those based on traditional inversion methods. In addition, the seismic inversion results based on neural networks generally suffer from lateral discontinuity. It further reduces the accuracy of the inversion results. To tackle these problems, we propose a pre-stack seismic amplitude variation with offset (AVO) inversion method based on Closed-Loop Multi-task conditional Wasserstein Generative Adversarial Network (CMcWGAN), which is a GAN-based AVO inversion method. CMcWGAN enables simultaneous and accurate inversion of P-wave velocity ( Vp ), S-wave velocity ( Vs ), and density ( ρ ). Moreover, it uses the low-frequency information of elastic parameters as a conditional input to alleviate the problem of lateral discontinuity in inversion results. Experimental results of simulated data show that the inversion results based on CMcWGAN have higher accuracy than those based on traditional AVO inversion methods. In addition, when the seismic angle gather is noisy, CMcWGAN has better robustness than the traditional methods. CMcWGAN can also obtain reasonable AVO inversion results in field seismic angle gather data.inversion results. Experimental results of simulated data show that the inversion results based on CMcWGAN have higher accuracy than those based on traditional AVO inversion method. In addition, when the seismic angle gather is noisy, CMcWGAN has better robustness than traditional method. CMcWGAN can also get reasonable AVO inversion results in field seismic angle gather data.
3 December 2021 in IEEE Geoscience and Remote Sensing Letters
Amplitude variation with offset (AVO) refers to the amplitude variation with offset. This relationship can be used to analyze lithology and identify the oil and gas reservoirs in seismic exploration. Traditional AVO inversion is a typical ill-posed problem. When deep learning is directly used for seismic inversion, there are three main issues. First, the label data are insufficient. Second, a network trained for one working area is not applicable to other working areas. Third, there are spatial discontinuities and instability problems in the inversion results. In this letter, we propose the AVO inversion method that combines transfer learning and low-frequency component constraints. Transfer learning strategy is introduced to solve two main problems: The label data are insufficient to train the network, and the trained network is not applicable to other regions. Taking the low-frequency component as the constraint term makes the solution easier to converge to the true value. The experimental results of a typical example show that our method not only effectively improves the prediction accuracy and spatial continuity of the inversion results, but also reduces dependence on logging data.