Ming-Dou Ker

Ming-Dou Ker

Auto-generated profile, based on publicly available information

Ming-Dou Ker

Institute of Electronics, National Yang Ming Chiao Tung University, Hsinchu, Taiwan

Research Focus & Metrics

Academic Career Length

33Years (1994-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 April 2006 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MKMing-Dou Ker
Ming-Dou Ker
SCShih-Lun Chen
Shih-Lun Chen
CTChia-Shen Tsai
Chia-Shen Tsai
A new charge pump circuit with consideration of gate-oxide reliability is designed with two pumping branches in this paper. The charge transfer switches in the new proposed circuit can be completely turned on and turned off, so its pumping efficiency is higher than that of the traditional designs. Moreover, the maximum gate-source and gate-drain voltages of all devices in the proposed charge pump circuit do not exceed the normal operating power supply voltage (VDD). Two test chips have been implemented in a 0.35-/spl mu/m 3.3-V CMOS process to verify the new proposed charge pump circuit. The measured output voltage of the new proposed four-stage charge pump circuit with each pumping capacitor of 2 pF to drive the capacitive output load is around 8.8 V under 3.3-V power supply (VDD = 3.3 V), which is limited by the junction breakdown voltage of the parasitic pn-junction in the given process. The new proposed circuit is suitable for applications in low-voltage CMOS processes because of its high pumping efficiency and no overstress across the gate oxide of devices.

24 September 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
CCCheng-Hsiang Cheng
Cheng-Hsiang Cheng
PTPing-Yuan Tsai
Ping-Yuan Tsai
TYTzu-Yi Yang
Tzu-Yi Yang
WCWan-Hsueh Cheng
Wan-Hsueh Cheng
TYTing-Yang Yen
Ting-Yang Yen
CWChung-Yu Wu
Chung-Yu Wu
A 16-channel closed-loop neuromodulation system-on-chip (SoC) for human epileptic seizure control is proposed and designed. In the proposed SoC, a 16-channel neural-signal acquisition unit (NSAU), a biosignal processor (BSP), a 16-channel high-voltage-tolerant stimulator (HVTS), and wireless power and bidirectional data telemetry are designed. In the NSAU, the input protection circuit is used to prevent MOSFET from overstressing by the high-voltage stimulations. Hence, NSAUs can share electrodes with stimulators. The auto-reset chopper-stabilized capacitive-coupled instrumentation amplifiers (AR-CSCCIAs) are designed with the chopper-stabilized technique with a new offset reduction loop. The measured input-referred noise is 2.09 $\mu \textrm {V}_{\mathrm {rms}}$ and the noise-efficiency factor (NEF) is 3.78. The entropy-and-spectrum seizure detection algorithm is implemented in the BSP with 0.76-s seizure detection latency and 97.8% detection accuracy. When the seizure onset is detected by the BSP, the HVTS with adaptive supply control delivers 0.5–3-mA biphasic current stimulation to suppress the seizure onset. The proposed SoC is powered wirelessly, and the bidirectional data telemetry is realized through the same pair of coils in 13.56 MHz. The downlink data rate is 211 Kb/s with the binary phase-shift keying (BPSK) modulation and a new BPSK demodulator. The uplink data rate is 106 Kb/s with the load-shift keying (LSK) modulation. The proposed SoC is fabricated in a 0.18- $\mu \text{m}$ CMOS technology and occupies 25 mm 2 . Electrical tests have been performed to characterize the SoC performance. In vivo animal experiments using mini-pigs have been performed to successfully verify the closed-loop neuromodulation functions on epileptic seizure suppression.

7 June 2021 in IEEE Transactions on Biomedical Circuits and Systems
Verified
Journal Article
Closed access
CHChia-Chi Hsieh
Chia-Chi Hsieh
MKMing-Dou Ker
Ming-Dou Ker
A 16-channel monopolar biphasic stimulator chip with discharge function for biomedical applications is proposed and designed. To provide monopolar biphasic stimulus currents, the positive (6V) and the negative (-6V) voltage sources are supported to generate the desired current pulses of ±3 mA. The monopolar biphasic stimulator chip was fabricated in a 0.18-μm 1.8-V/3.3-V CMOS process with the common grounded p-type substrate. The overstress and reliability issues on the low-voltage transistors in the stimulator circuits were fully overcome by circuit design. The silicon area of each single channel only occupies 0.08 mm 2 and the output level of stimulus current is up to ±3 mA. By applying the discharge function, safety concern of unbalanced charge in neuro-stimulation can be dealt properly. The residual average dc current is less than 3.42 nA after discharge is activated. Moreover, this chip has also been verified with both in-vitro imitation measurement and in-vivo animal test.

21 June 2021 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
SWSung-Hao Wang
Sung-Hao Wang
YHYu-Kai Huang
Yu-Kai Huang
CCChing-Yuan Chen
Ching-Yuan Chen
LTLi-Yang Tang
Li-Yang Tang
YTYen-Fu Tu
Yen-Fu Tu
CWChung-Yu Wu
Chung-Yu Wu
A CMOS bone-guided cochlear implant (BGCI) microsystem is proposed and verified. In the implanted System on Chip (SoC) of the proposed BGCI, the evoked compound action potential (ECAP) acquisition and electrode–tissue impedance measurement (EAEIM) circuit is integrated to measure both ECAP and electrode–tissue impedance for clinical diagnoses. Both positive-/negative-voltage charge pumps and monopolar biphasic constant-current stimulation (CCS) stimulator are designed on-chip to realize monopolar biphasic CCS or double-electrode multiple stimulations with a maximum stimulation current of 1.2 mA and a step of 10 $\mu \text{A}$ . With the double-electrode multiple stimulations, the electric field can be shifted and localized under the stimulating electrode to stimulate the auditory nerves. The wireless bilateral data telemetry circuits with a full-wave active rectifier and the pulsed load-shift keying (PLSK) modulators/demodulators are designed for power and data transmission. In vivo animal tests on guinea pigs have shown that the Wave III of electrically evoked auditory brainstem responses (EABRs) can be evoked successfully by electrical stimulation. Moreover, the decreasing latency gradient of evoked Wave III has been measured under the double-electrode multiple stimulations where the location of peak electric field can be shifted to the stimulating electrode in the apical site to stimulate the auditory nerves. Thus, the desired frequency resolution and spatial specificity of stimulation can be achieved. Both electrical measurement and in vivo animal tests have verified that the proposed BGCI microsystem is a feasible solution to eliminate the symptoms for patients with high-frequency hearing loss.

6 August 2013 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
FAFederico Agustin Altolaguirre
Federico Agustin Altolaguirre
MKMing-Dou Ker
Ming-Dou Ker
A new silicon controlled rectifier-based power-rail electrostatic discharge (ESD) clamp circuit was proposed with a novel trigger circuit that has very low leakage current in a small layout area for implementation. This circuit was successfully verified in a 40-nm CMOS process by using only low-voltage devices. The novel trigger circuit uses a diode-string based level-sensing ESD detection circuit, but not using MOS capacitor, which has very large leakage current. Moreover, the leakage current on the ESD detection circuit is further reduced, adding a diode in series with the trigger transistor. By combining these two techniques, the total silicon area of the power-rail ESD clamp circuit can be reduced three times, whereas the leakage current is three orders of magnitude smaller than that of the traditional design.

3 January 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
CDChia-Tsen Dai
Chia-Tsen Dai
MKMing-Dou Ker
Ming-Dou Ker
The modified silicon-controlled rectifier (SCR) fabricated in a 0.25-μm high-voltage (HV) bipolar-CMOS-DMOS (BCD) technology has been proposed to seek for both effective electrostatic discharge (ESD) protection and latchup immunity. Experimental results show that one of the proposed SCRs has a high holding voltage of up to ~ 30 V in the 100-ns transmission line pulsing measurement results. However, through the experimental verification by using the transient latchup test, the holding voltage of such proposed device decreases to ~ 20 V. It is due to the increased bipolar junction transistor current gains of the SCR path induced by the Joule-heating effect in the long-term measurement. For 20-V circuit applications, the ESD robustness of the proposed SCR with a holding voltage of ~ 20 V is lower than that of stacked low-voltage p-type MOS in the previous studies. Developing special modification of such HV devices is inefficient to achieve both effective ESD protection and latchup-free design in this 0.25-μm HV BCD technology.