8 February 2012 in Optics Express
Accurate conversion of wideband multi-GHz analog signals into the digital domain has long been a target of analog-to-digital converter (ADC) developers, driven by applications in radar systems, software radio, medical imaging, and communication systems. Aperture jitter has been a major bottleneck on the way towards higher speeds and better accuracy. Photonic ADCs, which perform sampling using ultra-stable optical pulse trains generated by mode-locked lasers, have been investigated for many years as a promising approach to overcome the jitter problem and bring ADC performance to new levels. This work demonstrates that the photonic approach can deliver on its promise by digitizing a 41 GHz signal with 7.0 effective bits using a photonic ADC built from discrete components. This accuracy corresponds to a timing jitter of 15 fs – a 4-5 times improvement over the performance of the best electronic ADCs which exist today. On the way towards an integrated photonic ADC, a silicon photonic chip with core photonic components was fabricated and used to digitize a 10 GHz signal with 3.5 effective bits. In these experiments, two wavelength channels were implemented, providing the overall sampling rate of 2.1 GSa/s. To show that photonic ADCs with larger channel counts are possible, a dual 20-channel silicon filter bank has been demonstrated.
15 January 2006 in Nature Materials
22 December 2010 in Optics Express
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
26 February 2014 in Scientific Reports
In the last years there has been a renewed interest for zinc oxide semiconductor, mainly triggered by its prospects in optoelectronic applications. In particular, zinc oxide thin films are being widely used for photovoltaic applications, in which the determination of the electrical conductivity is of great importance. Being an intrinsically doped material, the quantification of its doping concentration has always been challenging. Here we show how to probe the charge carrier density of zinc oxide thin films by Scanning Kelvin Probe Microscopy, a technique that allows measuring the contact potential difference between the tip and the sample surface with high spatial resolution. A simple electronic energy model is used for correlating the contact potential difference with the doping concentration in the material. Limitations of this technique are discussed in details and some experimental solutions are proposed. Two-dimensional doping concentration images acquired on radio frequency-sputtered intrinsic zinc oxide thin films with different thickness and deposited under different conditions are reported. We show that results inferred with this technique are in accordance with carrier concentration expected for zinc oxide thin films deposited under different conditions and obtained from resistivity and mobility measurements.
26 November 2015 in RSC Advances
In the present work, a spray pyrolysis technique was employed to deposit cerium (Ce) doped cadmium oxide (CdO) thin films with low level doping concentrations (0.25, 0.50, 0.75 and 1.0 wt%). The crystallite size and lattice parameter values were estimated from X-ray diffraction analysis. X-ray diffraction patterns reveal the shift of preferential growth orientation from (111) to (200) planes on incorporating Ce in the CdO matrix. The oxidation state of Ce, Cd and O in the deposited films was determined by X-ray photoelectron spectroscopic (XPS) studies. Surface microstructures of the films were analyzed by atomic force microscopy and their surface nature was studied by field emission scanning electron microscopy (FE-SEM). The electrical properties of the deposited films were determined by Hall measurements in the van der Pauw configuration. The charge carrier concentration of the CdO thin film increased from 1.0 × 1020 cm−3 to 3.85 × 1020 cm−3 on doping 0.50 wt% Ce; whereas, resistivity decreased from 9.32 × 10−4 Ω cm to 3.81 × 10−4 Ω cm. The deposited Ce-doped CdO thin films for various concentrations showed an increase in the average optical transmittance to 85% from that of 72% for the CdO film in the visible and NIR region. The band gap was gradually increased from 2.38 eV to 2.63 eV due to an increase in the Ce doping at various levels. The emission properties of CdO and Ce doped CdO thin films were studied by a photoluminescence spectrum recorded at room temperature. The figure of merit estimated for 0.50 wt% of Ce doped CdO film is 9.18 × 10−3 Ω−1.