6 January 2023 in Journal of Fluid Mechanics
Piezoelectric macro-fibre composite (MFC) actuators are employed onto the flexible leeward surface of an airfoil for active control. Time-resolved aerodynamic forces, membrane deformations and flow fields are synchronously measured at low Reynolds number (Re = 6 × 104). Mean aerodynamics show that the actively controlled airfoil can achieve lift-enhancement and drag-reduction simultaneously in the angle of attack range of 10° ≤ α ≤ 14°, where the rigid airfoil encounters stall. The maximum increments of lift and lift-to-drag ratio are 27.1 % and 126 % at the reduced actuation frequency of ${f^ + } = 3.52$ . The unsteady coupling features are further analysed at α = 12°, where the maximum lift-enhancement occurs. It is newly discovered that the membrane vibrations and flow fields are locked into half of the actuation frequency when ${f^ + } > 3$ . The shift of the dominant vibration mode from bending to inclining is the reason for the novel ‘half-frequency lock-in’ phenomenon. To the fluid–structure interaction, there are three characteristic frequencies for the actively controlled airfoil: $S{t_1} = 0.5{f^ + }$ , $S{t_2} = {f^ + }$ , and $S{t_3} = 1.5{f^ + }$ . Here, St1 and its harmonics (St2, St3) are coupled with the natural frequencies of the leading-edge shear layer, resulting in the generation of multi-scale flow structures and suppression of flow separation. The lift presents comparable dominant frequencies between St1 and St3, which means the instantaneous lift is determined by the flow structures of St1 and St3. The local membrane bulge and dent affect the instantaneous swirl strength of flow structures near the maximum vibration amplitude location, which is the main reason for the variation of instantaneous lift.
1 September 2021 in Chinese Journal of Aeronautics
21 November 2023 in Science China Technological Sciences
1 May 2026 in Physics of Fluids
An integrated optical system has been developed to enable simultaneous measurements of three-dimensional deformation and near-field tip vortex of flexible wings. The system combines a structured-light deformation measurement method and particle image velocimetry, operating at distinct wavelengths to avoid optical interference and achieving a fully non-intrusive measurement. Wind tunnel experiments are conducted on a simplified aircraft model equipped with one pair of rigid wings and two kinds of flexible wings at a Reynolds number of 1.1 × 105. The results show that increasing flexibility leads to larger three-dimensional deformations, with the wing tip moving upward, downstream, and spanwise inward. These deformations correlate closely with aerodynamic loading and induce corresponding vertical and spanwise displacements of the tip vortex. Despite the significant deformation as well as self-induced vibration, the radial circulation distribution of the tip vortex follows the self-similar law. Two kinds of vibration patterns, namely a bending vibration and a torsional vibration, are observed as associated with distinct patterns of vortex wandering. The bending vibration correlates with vertical wandering, and the torsional vibration enhances the spanwise wandering.
1 February 2026 in Physics of Fluids
This study focuses on the vibration behavior of a flexible membrane wing encountering an accelerating free stream, aiming to unravel its transient response. Wind-tunnel experiments are carried out to synchronously measure the time-resolved membrane deformations and surrounding flow fields. Based on the time-frequency spectrum obtained by continuous wavelet transform of the vibration signal, the time interval from the non-vibration state to the establishment of the dominant second mode state is defined as the vibration onset stage. During this stage, a chordwise first vibration mode (approximately 20 Hz) initially emerges and subsequently transitions to a second mode (approximately 40 Hz). The vibration frequency of each mode increases over time due to the increasing camber and membrane tension. The nondimensional frequencies of membrane vibration generally match the Strouhal number range reported in the literature. Time-frequency analysis reveals a coupling between the membrane vibration and the velocity fluctuations within the leading-edge shear layer. As the accelerating flow impacts, the membrane gradually approaches the shear layer, perceives the disturbances therein, and destabilizes to vibrate. Notably, the generation and transition of vibration modes stem from the coupling of Kelvin–Helmholtz instability and membrane's natural frequencies, which is due to an internal resonance within the coupled fluid–structure system. The wake retains its inherent bluff-body flow features at the beginning of the vibration onset stage, after which it becomes coupled with the membrane vibration.