23 November 2017 in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
Non-orthogonal multiple access (NOMA) is a promising candidate for the future fifth generation systems because of its ability to provide greater spectral efficiency. Interleave division multiple access (IDMA) is one of the NOMA techniques that can support multiple access for a large number of users in the same bandwidth. One of the problems in the hardware implementation of IDMA is its high latency due to iterative processing. In this paper, we propose a novel architecture for the IDMA receiver with low latency while maintaining low complexity. In the conventional architecture, the IDMA receiver sequentially handles deinterleaving, despreading, spreading, and interleaving for multi-user detection. The proposed architecture which we call interleaved domain multi-user detection can perform multi-user detection directly without deinterleaving the received frame in the interference canceller iteration resulting in the decrease of latency by almost half. We also describe the memory design which is able to implement the proposed architecture. The results show that due to the reduction of the latency by half, the throughput can be increased by twice compared with the conventional architecture. VLSI implementation results show that the proposed architecture has reduced circuit area and power consumption by 53% and 58%, respectively, compared with the conventional architecture with the same throughput condition.
20 December 2019 in IEEE Communications Letters
Transmission Control Protocol with Network Coding (TCP/NC) and its variants were developed to improve the goodput performance of TCP protocol in lossy networks. However, no TCP/NC enhancement work can get a high goodput performance in bi-directional packet loss environments, especially with a high degree and/or burst loss of ACK packets. Therefore, we propose a new scheme called TCP/NC with Bi-directional Loss Tolerance (TCP/NCwBLT) to maintain a goodput in a wide range of bi-directional loss environments by combining three techniques of “ACK accumulation”, “ACK retransmission”, and “Duplicate ACK generator” at the source and/or the sink sides. The simulation results on ns-3 show that TCP/NCwBLT always outperforms the various TCPs and a recent variant of TCP/NC when packet losses happen in both directions, and its advantage significantly increases at a high ACK loss rate.
16 May 2024 in IEEE Access
Wearable devices have gained significant popularity for continuous Electrocardiogram (ECG) monitoring due to their compactness and convenience. Day-by-day and 24/7 monitoring without gaps is demanded to promptly detect unusual symptoms that are short-term warning signs of dangerous diseases. Cost-saving criteria are the highest priority to extend the use time of devices and maintain the system operation. However, not all measured signals are useful because the signal quality will be affected by many things such as motion artifacts and muscle noise. Demands on classifying and sending only the usable signal is a requirement, it can save the battery on wearable devices and the expense on the server side (i.e., cloud-based processing), such as storage and processing resources. Therefore, Signal Quality Indices (SQIs) have been developed and researched to determine signal quality to meet the above requirements. This study introduces a novel SQI approach to classify signals. The proposed method has three contributions: 1) exponentially Weighted Mean-Variance (EWMV), a lightweight equation, to identify peaks, followed by applying an adaptive threshold to define peaks that have the same shape as R-peaks; 2) outlier elimination process is proposed to enhance the accuracy; and 3) maximal Overlap Discrete Wavelet Transform (MODWT) is employed to categorize ECG signals into a new class, potentially containing signals relevant to pathological analysis. Experimental results demonstrate that our algorithm achieves the highest sensitivity for both noisy and noiseless data sets. Specifically, it achieved a sensitivity of 99.31% for clean signals and 97.69% for noisy signals. In the case of the PhysioNet challenge data set, while our sensitivity of 96.37% may not be the highest, our accuracy stands out at 95.10%, surpassing other methods recently reviewed. Additionally, our approach demonstrates the lowest trade-off between sensitivity and accuracy among the surveyed SQI techniques.
6 February 2026 in IEEE Open Journal of the Computer Society
Linear multi-hop wireless sensor networks (LWSNs) are commonly used for infrastructure monitoring and event detection where single-hop communication and wired links are impractical. Despite their cost-effectiveness and ease of deployment, these networks often suffer packet loss due to link instability, interference, and varying traffic loads. This article presents a proactive packet loss recovery method combining hop-by-hop Erasure Coding (EC) with Time Division Multiple Access (TDMA) scheduling and investigates its scalability and sustainability. EC encodes multiple packets into linear combinations, enabling decoding as long as the number of received coded packets meets or exceeds the number of original packets. This approach enhances robustness against unpredictable losses and fluctuating data rates. We present a general EC-based TDMA timeslot scheduling model for LWSNs of any size, supporting concurrent data uplink and control downlink delivery within one cycle. A heuristic search algorithm efficiently finds near-optimal timeslot allocations, meeting energy consumption constraints while maximizing the successful delivery probability. Simulations on a 15–15 topology with a high link loss rate of 0.5, where each node generates 5 data packets per minute, achieve a successful delivery probability exceeding 0.99, while power analysis shows that nodes can sustain 10 days of operation with a 1000 mAh, 3.2 V LiFePO$_{4}$ battery. These results demonstrate that the proposed EC-based TDMA scheduling is a reliable, energy-efficient, and practical solution for real-world LWSN deployments.