Departament d'Enginyeria Química, E. T. S. d'Enginyeria Industrial de Barcelona, Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Spain
Auto-generated profile, based on publicly available information
Guillem Revilla-López
Departament d'Enginyeria Química, E. T. S. d'Enginyeria Industrial de Barcelona, Universitat Politècnica de Catalunya, Diagonal 647, 08028 Barcelona, Spain
The structure and properties of water films in contact with metal surfaces are crucial to understand the chemical and electrochemical processes involved in energy-related technologies. The nature of thin water films on Pd, Pt, and Ru has been investigated by first-principles molecular dynamics to assess how the chemistry at the water–metal surface is responsible for the diversity in the behavior of the water layers closer to the metal. The characteristics of liquid water: the radial distribution functions, coordination, and fragment speciation appear only for unconfined water layers of a minimum of 1.4 nm thick. In addition, the water layer is denser in the region closest to the metal for Pd and Pt, where seven- and five-membered ring motifs appear. These patterns are identical to those identified by scanning tunneling microscopy for isolated water bilayers. On Ru densification at the interface is not observed, water dissociates, and protons and hydroxyl groups are locked at the surface. Therefore, the acid–base properties in the area close to the metal are not perturbed, in agreement with experiments, and the bulk water resembles an electric double layer. Confinement affects water making it closer to ice for both structural and dynamic properties, thus being responsible for the higher viscosity experimentally found at the nanoscale. All these contributions modify the solvation of reactants and products at the water–metal interface and will affect the catalytic and electrocatalytic properties of the surface.
Self-assembly in aqueous solution has been investigated for two Fmoc [Fmoc = N-(fluorenyl)-9-methoxycarbonyl] tetrapeptides comprising the RGDS cell adhesion motif from fibronectin or the scrambled sequence GRDS. The hydrophobic Fmoc unit confers amphiphilicity on the molecules, and introduces aromatic stacking interactions. Circular dichroism and FTIR spectroscopy show that the self-assembly of both peptides at low concentration is dominated by interactions among Fmoc units, although Fmoc-GRDS shows β-sheet features, at lower concentration than Fmoc-RGDS. Fibre X-ray diffraction indicates β-sheet formation by both peptides at sufficiently high concentration. Strong alignment effects are revealed by linear dichroism experiments for Fmoc-GRDS. Cryo-TEM and small-angle X-ray scattering (SAXS) reveal that both samples form fibrils with a diameter of approximately 10 nm. Both Fmoc-tetrapeptides form self-supporting hydrogels at sufficiently high concentration. Dynamic shear rheometry enabled measurements of the moduli for the Fmoc-GRDS hydrogel, however syneresis was observed for the Fmoc-RGDS hydrogel which was significantly less stable to shear. Molecular dynamics computer simulations were carried out considering parallel and antiparallel β-sheet configurations of systems containing 7 and 21 molecules of Fmoc-RGDS or Fmoc-GRDS, the results being analyzed in terms of both intermolecular structural parameters and energy contributions.
15 August 2014 in Journal of Materials Chemistry B
Hydroxyapatite (HAp) particles with very different surface charges and compositions (i.e. different Ca/P and CO32−/PO43− ratios) have been obtained by varying the experimental conditions used during the chemical precipitation process. The DNA adsorption capacity and protection imparted against the attack of nucleases of HAp particles have been proved to depend on the surface charge while the buffering capacity is affected by the chemical composition. On the basis of both the surface charge and the crystallinity, the predominant planes at the surfaces of HAp particles have been identified. Atomistic molecular dynamics simulations of surfaces constructed with these planes (i.e. (001) and the two terminations of (010)) with the adsorbed B-DNA double helix have been performed to get microscopic understanding of the influence of the mineral in the biomolecule structure and the interaction energies. The results indicate that the DNA secondary structure is perfectly preserved on the (001) surface, this stability being accompanied by an attractive binding energy. In contrast, the (010) surface with PO43−, OH− and Ca2+ ions in the termination induces significant local and global deformations in the double helix, repulsive OH−(HAp)⋯PO43− (DNA) interactions provoking the desorption of the biomolecule. Finally, although the termination of the (010) surface with PO43− and Ca2+ ions also deforms the double helix, it forms very strong attractive interactions with the biomolecule. These binding characteristics are in excellent agreement with the DNA adsorption and protection abilities experimentally determined for the HAp samples. Finally, the surface charge has been found less decisive than the chemical composition in the efficacy of the transfection process.
Encapsulation of DNA into hydroxyapatite (HAp) has been investigated using a rational approach that involves computer simulation and experimental techniques. The temporal evolution of the radial distribution functions derived from atomistic molecular dynamics simulations of Ca2+, PO43− and OH−-containing aqueous solutions in the presence and absence of B-DNA has been used to conclude that the backbone of the double helix acts as a template for HAp growth. More specifically, results reveal the formation of calcium phosphate clusters at the first stages of the simulations, which subsequently re-organize to nucleate HAp. This effect is produced in the absence and, especially, presence, of DNA indicating that the biomolecules do not inhibit but even promote mineral growth. Furthermore, computer simulations suggest that the diffusion of the OH− anions through the inorganic solution is the limiting step for the nucleation of the biomineral. Nanocapsules and crystalline nanorods of HAp containing DNA molecules inside have been prepared by mixing solutions containing Ca2+ and PO43− ions with fish sperm DNA at high pH. The dimensions and morphology of such nanostructures have been examined by transmission electron microscopy, while the characterization of the biomineral has been focused on the identification of DNA inside HAp using infrared, X-ray photoelectron and UV-vis spectroscopies, as well as gel electrophoresis. The biominerals reported in this work are important for biomedical applications requiring the protection of DNA from aggressive environmental conditions.
Polyether polyols are used widely in the plastic and coating industries in the form of polyurethanes. The polymerization of epoxides can be catalyzed by double metal cyanides (DMCs), Zn3[Co(CN)6]2. These catalysts were first reported in the 1960s by General Tire Inc. and provide products with excellent technical features, which are better than those that result from traditional alkaline polymerization as side reactions are alleviated. However, DMC‐catalyzed polymerization is not free of drawbacks as high‐molecular‐weight side products (1–3 wt %) can form in the propylene process. These tails are detrimental to the subsequent use of these polymers, in particular to foam stability. Despite the wide industrial interest in DMCs, there are only a few experimental studies and a complete lack of theoretical research of their structure, activity, and performance. The present work is thus the first attempt to describe the nature of the active site, the main polymerization mechanism, and two potential origins for the high‐weight tails from a theoretical standpoint by analyzing three crucial steps in the polymerization process.
Different aspects of biominerals formed by apatite and DNA have been investigated using computer modeling tools. Firstly, the structure and stability of biominerals in which DNA molecules are embedded into hydroxyapatite and fluoroapatite nanopores have been examined by combining different molecular mechanics methods. After this, the early processes in the nucleation of hydroxyapatite at a DNA template have been investigated using molecular dynamics simulations. Results indicate that duplexes of DNA adopting a B double helix can be encapsulated inside nanopores of hydroxyapatite without undergoing significant distortions in the inter-strand hydrogen bonds and the intra-strand stacking. This ability of hydroxyapatite is practically independent of the DNA sequence, which has been attributed to the stabilizing role of the interactions between the calcium atoms of the mineral and the phosphate groups of the biomolecule. In contrast, the fluorine atoms of fluoroapatite induce pronounced structural distortions in the double helix when embedded in a pore of the same dimensions, resulting in the loss of its most relevant characteristics. On the other hand, molecular dynamics simulations have allowed us to observe the formation of calcium phosphate clusters at the surface of the B-DNA template. Electrostatic interactions between the phosphate groups of DNA and Ca2+ have been found to essential for the formation of stable ion complexes, which were the starting point of calcium phosphate clusters by incorporating PO43 from the solution.