2 October 2020 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
The optimal use of batteries in drones is a critical issue for achieving both reliable operation and maximum flight time. The key is to acquire accurate information about the state of charge (SoC) of the battery in runtime. Drones typically employ series-connected lithium-ion polymer (Li-Po) battery cells, whose SoC is affected by many environmental factors as well as flight patterns. In this article, we propose a scheme, called Optrone, which maximizes the flight time of a drone while safely using the battery. Understanding the implications of the factors affecting the SoC of the drone's battery pack, we propose a three-level SoC, which is a metric for representing the SoC of a battery in runtime. We also provide various operating policies to users to improve the safety and efficiency of operating the drone. We implemented the prototype hardware and software for Optrone, and validated its operation in controlled and real environments. The experimental results in a controlled environment showed that the proposed three-level SoC poses less than 3% error and the operating policies achieved a flight time gain of 19.4%, while guaranteeing battery safety. We also observed a flight time gain of about 10% in real outdoor experiments, where the user rightly adheres to the advised Optrone policy.
1 November 2020 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
9 August 2022 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Battery-powered devices commonly use Li-ion batteries due to their high energy density. Unfortunately, low ambient temperature and high discharge current significantly affect the available capacity of Li-ion batteries at runtime. One solution to handle this issue is to construct a hybrid energy storage (HES) system, taking advantage of the different performance characteristics of various Li-ion batteries. Conventional HES techniques often configure systems without considering the hardware overhead and capacity loss of batteries. Moreover, dynamic energy management in HES was not considered adequately due to severe power leakage. In this article, we propose DynLiB, a reconfigurable HES architecture that provides high energy availability in various runtime environments. DynLiB constructs HES with only two types of batteries, the main battery and the auxiliary battery, to reduce the operational cost of the hardware. The capacity of each battery is determined based on the application profile that characterizes the runtime factors. DynLiB supports energy transfer between batteries so that the available energy is maximized by dynamically transferring energy between the batteries, depending on the runtime environment. We implemented a prototype system to validate the efficacy of DynLiB. The experimental results showed that DynLiB achieved an average energy gain of 27.2% compared to a single-type battery system in various runtime environments.
1 November 2020 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems