1 July 2006 in Cement and Concrete Composites
1 May 2009 in Construction and Building Materials
1 December 2004 in Journal of Materials in Civil Engineering
This paper describes the work carried out in laboratory to produce concrete with good properties using oxidizing electric arc furnace (EAF) slag as fine and coarse aggregate. To do this, the slag obtained in the steelmaking process must be crushed and stabilized. First, a suitable mortar must be made and tested. Next, several mixes of concrete are designed in order to analyze their strength and properties. From the results obtained, it can be deduced that this concrete can be produced for use in a wide range of applications in civil engineering and construction. Studies and tests were performed on the durability of these concretes showing an acceptable behavior against aggressive environments. Finally, some leaching tests were carried out in order to verify their environmental compatibility.
1 October 2005 in Journal of Materials in Civil Engineering
Ladle furnace reducing slag is a common byproduct in steelmaking of carbon and low alloy steels. After air cooling and weathering over several days, this material is completely ground into fine white particles. Physical, chemical, and crystalline characterizations were performed in order to verify possibilities for its direct application as a construction material. Two ways are proposed for the immediate use of ladle furnace slag: masonry mortars and paving mixes for rural roads with low levels of traffic.
1 August 2015 in Tribology International
1 October 2014 in Construction and Building Materials