1 January 1995 in IEE Proceedings - Generation, Transmission and Distribution
As the maximum power operating point (MPOP) of photovoltaic (PV) power generation systems changes with changing atmospheric conditions (e.g. solar radiation and temperature), an important consideration in the design of efficient PV systems is to track the MPOP correctly. Many maximum power tracking (MPT) techniques have been considered in the past but techniques using microprocessors with appropriate MPT algorithms are favoured because of their flexibility and compatibility with different PV arrays. Although the efficiency of these MPT algorithms is usually high, it drops noticeably in cases of rapidly changing atmospheric conditions. The authors have developed a new MPT algorithm based on the fact that the MPOP of a PV generator can be tracked accurately by comparing the incremental and instantaneous conductances of the PV array. The work was carried out by both simulation and experiment, with results showing that the developed incremental conductance (IncCond) algorithm has successfully tracked the MPOP, even in cases of rapidly changing atmospheric conditions, and has higher efficiency than ordinary algorithms in terms of total PV energy transferred to the load.
1 November 2004 in Cryogenics
8 August 2003 in Superconductor Science and Technology
The mechanical and superconducting properties of MgB2 wires heat treated at various conditions have been investigated. Superconducting MgB2 wires, fabricated by the powder-in-tube (PIT) method, show a transition temperature Tc at 32.4 K for the as-rolled wire as shown by dc-resistivity measurement. It is found that the Tc is improved (37.3–38.4 K) by subsequent Ar annealing treatment under various sintering temperatures and times. Remarkably, the annealed samples show significant improvement in the overall quality of the samples. On annealing at 1323 K for 0.6 ks, we obtained the best quality sample with a Jc of 470 A mm−2 at 2.0 T. In order to find out the irreversible field (Birr), the technique of the Kramer plot was applied. The Birr obtained was 7.6 and 9.6 T, for the as-rolled as well as the annealed samples at 1073 K for 3.6 ks, respectively. The mechanical properties were measured under tensile load. The yield stress was 450 MPa for the as-rolled sample and decreased by annealing at 1323 K for 0.6 ks to 110 MPa. After the wires were heat treated at temperatures between 1073 and 1323 K and tensile-stressed up to their yield stress at room temperature. The critical current measurements were carried on such samples at 4.2 K under applied magnetic fields of 2 and 5 T. The stress level for the 95% tolerance of critical current was determined to 97 MPa.
1 February 2008 in Journal of Physics: Conference Series
4 August 1997 in Angewandte Chemie
1 August 2002 in Physica C: Superconductivity and its Applications