Department of Electronic Engineering, School of Electronic Science and Engineering, Fujian Key Laboratory of Ultrafast Laser Technology and Applications, Xiamen University, Xiamen, China
Auto-generated profile, based on publicly available information
Hanqiao Chen
Department of Electronic Engineering, School of Electronic Science and Engineering, Fujian Key Laboratory of Ultrafast Laser Technology and Applications, Xiamen University, Xiamen, China
We propose a new method called square-wave modulation quadrature separation (SWMQS) to reconstruct the displacement of the target in real-time. A pair of quadrature laser self-mixing interference (SMI) signals are extracted synchronously from a square-wave modulation SMI signal generated by an electro-optic modulator (EOM) merely by a single photodetector. Then, the reconstruction of displacement is realized by the quadrature phase unwrapping process without estimation of direction or transition in weak feedback regime. The RMS error of 20.7 nm (0.52%) was achieved under the condition of 13.1 dB signal-to-noise ratio (SNR) experimentally. Simulations and experiments show that this algorithm has strong anti-noise ability and the reconstruction accuracy can be further improved as the feedback strength weakens. The algorithm allows us with low requirements on the target and simplifies the optical path structure and calculation process of orthogonal signal extraction with a simple calculation of average and interpolation.
An improved method combining multiple reflections with the phase-modulation technique (MR-PM) is proposed to construct a self-mixing interferometer with high accuracy. The phase modulation is performed by using an electro-optic modulator that is placed in the external cavity. To broaden the harmonic components spectrum of the self-mixing signal, the multiple-reflection technique is employed. By extracting orthogonal signals from the spectrum, phase demodulation is implemented to realize displacement reconstruction. The principle and signal processing approach are described in detail. A series of simulations and experiments indicate that the measurement accuracy of the system can be effectively improved with the increase in reflection times. The vibration with an amplitude of 44 nm has been proved to be measurable with a reconstruction error less than 3 nm. Due to the advantages of high accuracy and broad measurement range, the proposed method will play a significant role in the field of non-contact nanometer vibration measurement.
A new signal processing method named orthogonal signal phase multiplication (OSPM) is proposed, which is used to improve the precision of vibration measurement in a phase-modulating self-mixing interferometer (SMI). The modulated signal is acquired by an electro-optic modulator, which is placed in the external cavity. Higher measurement precision is realized by performing the phase multiplication algorithm on the orthogonal signals extracted from the harmonic components of the signal spectrum. Theoretically, the displacement reconstruction precision of OSPM is higher than that of conventional modulation methods, and it can be continuously improved by increasing the multiplication times. The feasibility and performance of the proposed method are verified by simulated signals and confirmed by experiments; the absolute error is less than 11 nm, and relative error is less than 0.75%, within the amplitude range from 661 nm to 2013 nm. This method does not involve additional optical elements, and its effectiveness meet the requirements for real-time high-precision measurements.
This paper proposes a method for generating quadrature self-mixing interference (SMI) signals using current modulation for real-time displacement sensing. By applying a square-wave current to a semiconductor laser, periodically phase-modulated SMI signals are produced at a certain distance. Subsequently, a pair of quadrature SMI signals is obtained by separately sampling at the high- and low-levels of the square-wave signal, followed by an interpolation process. Finally, the target’s motion displacement is reconstructed by quadrature phase unwrapping algorithm. The method demonstrates excellent robustness, achieving reconstruction accuracy better than 20 nm under 7 dB Gaussian noise in simulation. Experiments for both sinusoidal vibrations and non-harmonic moving targets are conducted, with a displacement reconstruction error of 22.3 nm. This method does not require any additional optical components to produce phase modulation, significantly reducing system complexity and cost. Furthermore, the paper analyzes the algorithm’s applicability under different distances, current modulation coefficients, and modulation voltages, providing a reference for the application of current modulation methods in self-mixing interference displacement measurements.