18 November 2022 in IEEE Robotics and Automation Letters
This letter proposes a palm-sized omnidirectional mobile robot with two torus wheels. A single torus wheel is made of an elastic elongated coil spring in which the two ends of the coil connected each other and is driven by a piezoelectric actuator (stator) that can generate 2-degrees-of-freedom (axial and angular) motions. The stator converts its thrust force and torque into longitudinal and meridian motions of the torus wheel, respectively, making the torus work as an omnidirectional wheel on a plane. In this paper, we build a control system of a piezo-driven 2-degrees-of-freedom torus wheel and evaluate its performance measures, such as the transient characteristics, the orientation accuracy and the payload capacity. An omnidirectional robot with the two torus wheels is constructed, and the feedback control for a desired planar motion is demonstrated. The design inspired by a ring torus represents the possibility toward the creation of an unprecedentedly simple, light, and compact 2-wheel omnidirectional robot.
9 July 2020 in IEEE Robotics and Automation Letters
We propose a twin coil spring-based soft actuator that can move forward and backward with extensibility and can bend left and right with flexibility. It is driven by two flexible ultrasonic motors, each consisting of a compact metallic stator and an elastic elongated coil spring. The position of the end effector is determined by the positional relationship of the two coils and can be kinetically controlled with a constant curvature model. In our design, the coil springs act not only as a flexible slider but also as a resistive positional sensor. Changes in the resistance between the stator and the coil spring end are converted to a voltage and used for position detection. Each flexible ultrasonic motor with the self-sensing is experimentally evaluated, and it has shown good response characteristics, high sensor linearity, and robustness, without losing flexibility and controllability. We build a twin coil spring-based flexible ultrasonic motor prototype and demonstrate feedback control of planar motion based on the constant curvature model.
1 January 2020 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
We propose a position self-sensing of a flexible ultrasonic motor. This motor is composed of a metal cube with a hole and a coil spring inserted into the hole. The coil spring inserted into the hole moves back and forward. The position can be measured by regarding the motor as a potentiometer. This principle has linearity and does not require additional components. Experimental results show that the sensor output is stable and robustness even when the coil spring is strongly bent and pulled/pushed.