1 November 2024 in Physics of Fluids
The insight to the hydrodynamics of the flapping hydrofoils can be utilized to comprehend the fluid-mechanical mechanisms for the variation of the hydrofoil's propulsion performance, and optimize the design of the bio-inspired underwater robots. This paper numerically investigates the hydrodynamic performance of a two-dimensional NACA 0012 (defined by National Advisory Committee for Aeronautics) hydrofoil undergoing combined pitching and heaving motions, based on the discrete vortex method. A novel boundary method which couples the Joukowsky transformation and the circle theorem is used to deal with the vortex elements inside the hydrofoil surface. The numerical method is validated by the experiments from the available relative cases by comparing the hydrodynamic forces and the wake patterns with the pure pitching and pure heaving hydrofoil. Via the vortex dynamics, the discussion is carried out to explain the thrust deterioration within the large Strouhal number and large pitching amplitude in the combined motion. Further, a parameter optimization study is conducted under different heaving amplitudes and pivot locations. When the heaving amplitude is 1.25c and the pivot location is at 0.45c, the propulsion efficiency of the flapping hydrofoil is found maximized. Finally, by combining the time history of hydrodynamic forces and the formation and release of the leading-edge vortex and trailing-edge vortex in the vorticity field, this paper explains the reason why the optimal efficiency is obtained.
1 July 2025 in Physics of Fluids
Motivated by the extraordinary maneuvering capabilities by natural creatures, the unsteady fluid dynamics of the flapping air- and hydrofoils has been of keen sustained interest in recent decades, which are critical to the performance of the biomimetic thrusters. For the hydrofoil pitching with large amplitudes, in which situation the flow is massively separated from foil, the vortex evolutions and their implications on the hydrodynamic properties have not been described clearly. This paper numerically investigates the hydrodynamic properties of a large-amplitude 32° pitching NACA (National Advisory Committee for Aeronautics) 0012 hydrofoil, with Strouhal number 0.006–1.30. Focused on the vortex evolutions and their implications on the hydrodynamic responses, four wake types, i.e., leading-edge vortex (LEV)–trailing-edge vortex pair wake, von Kármán-like wake, inverted von Kármán wake, and deflected wake, are classified and discussed in detail, via vorticity patterns and the surface pressure distribution. The increasing Strouhal number delays the formation and the advection of the LEV and drastically alters the vortex dynamics. The asymmetric wake reinforces the thrust generation, which facilitates the transition from the drag to thrust. In addition, the effect of the pitching amplitude on the thrust generation and the wake types is also investigated, with pitching amplitude 15°–40°. With the pitching amplitude increases, the thrust and the efficiency monotonously reduce, and the thresholds for different wake types are also postponed.
1 September 2025 in Physics of Fluids
Non-vertical flexible structures, such as inclined and curved cylinders, are encountered in deep-sea applications and exhibit more complex vortex-induced vibration (VIV) responses than vertical cylinders due to geometric non-uniformity and flow-curvature interaction. These complexities challenge both full-scale computational fluid dynamics (CFD) and reduced-order models, emphasizing the need for an accurate and efficient CFD-based approach. This study presents a meshless numerical methodology employing strip-theory-based discrete vortex method (SDVM) to simulate the VIV in non-vertical flexible cylinders. The full-scale flow is approximated by a sequence of flow strips, each resolved using SDVM without empirical hydrodynamic coefficients. Structural dynamics are modeled using a tensioned Bernoulli–Euler beam and solved in time domain. The methodology is validated against two benchmark experiments: an inclined flexible cylinder and a steel catenary riser (SCR) in uniform flow. Simulations verify the independence principle up to 60° inclination. For the SCR, a mixed standing-traveling wave pattern is observed, with downward energy transfer from the top. Additionally, a novel modal group switching behavior, characterized by abrupt shifts in the dominant frequency and amplitude, is also identified over a broad range of incoming flow velocities. The proposed methodology offers an efficient and accurate tool for simulating VIV in complex offshore structures, bridging the gap between simplified reduced-order models and full-scale CFD simulations.
24 October 2026 in International Journal of Mechanical Sciences