14 May 2018 in IEEE Transactions on Power Systems
Uncertainty of the wind power output is the main influence factor for wind power utilization in bulk power system. Because of the large capacity and the load characteristic, energy-intensive load holds great potentials to share the burden of wind power fluctuation smoothing. In this paper, a control scheme of energy-intensive load power is proposed to smooth wind power fluctuation. Based on the characteristic of the energy-intensive load production, the feasibility of energy-intensive load control and its influence on the production is discussed. Feedback control is designed to regulate the saturable reactor and transformer tap changer when power support from bulk power system is limited. Regulation capacity is analyzed quantitatively based on energy-intensive load equivalent circuit model. A grid-connected energy-intensive enterprise driven by self-generation wind power plants and thermal power plants is studied as an example case. By the proposed energy-intensive load control scheme, power fluctuation of the wind farms can be smoothed with the minimum control cost. Besides, the regulation requirement of the bulk power system is eased correspondingly so that the utilization capacity of the power system can be improved significantly. Simulation is done on the real-time digital simulator (RTDS) to verify the effectiveness of the proposed control method.
9 May 2018 in IEEE Transactions on Power Systems
Frequency control of isolated power systems with high penetration of wind power is a challenging task for system operators. The difficulty results from the limited frequency response capability of thermal power units to keep up with the fluctuations of wind power. This paper develops a field verification architecture to leverage aluminum smelting loads (ASLs) to participate in primary frequency control. A new method is proposed to coordinate ASLs with thermal power units to quickly stabilize the isolated power system with significant wind power fluctuations or curtailments. Moreover, a closed-loop control system for the ASLs controller is developed and tested on a real-world isolated power system in Inner Mongolia, China. Hardware-in-the-loop simulations, as well as field tests, are conducted under various scenarios of wind power fluctuations or curtailments to verify the proposed architecture for frequency control. The highly consistent simulation results and field tests demonstrate the good frequency control capability of the ASL. The regulated power from the ASL is demonstrated to be able to reach 6% of its rated power within 4 s. Working jointly with thermal power units, the ASL helps maintain the stable operation of the isolated power system, significantly improving the frequency response characteristic.