Oleksandr Subbotin

Oleksandr Subbotin

Auto-generated profile, based on publicly available information

Oleksandr Subbotin

Національний технічний університет «Харківський політехнічний інститут», аспірант кафедри «Матеріалознавство»; м. Харків

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2022 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
OSOleksandr Subbotin
Oleksandr Subbotin
VBValery Bilozerov
Valery Bilozerov
OVOleg Volkov
Oleg Volkov
VSValeria Subbotinа
Valeria Subbotinа
VSVadym Shevtsov
Vadym Shevtsov
Досліджені фрикційні характеристики покриттів на алюмінієвому сплаві Д16, які сформовані методом мікродугового оксидування (МДО) в лужно-силікатному електроліті при катодно-анодному режимі. Досліджена структура та морфологія робочого шару поверхні МДО МДО–покриття, який працює в парах тертя з чавуном, сталлю та МДО–покриттям в умовах змащування дизельною оливою та водою. Показана користь від наявної пористості робочого шару МДО МДО–покриття, яка складає 5–10% та сприяє утримуванню мастила в зоні тертя. Вивчено фазовий склад, твердість покриттів та визначено коефіцієнт тертя ковзання на машині тертя СМЦ-2 за схемою «диск–колодка» при використанні в якості мастила води і дизельної оливи; навантаження змінювалось від 0,2 до 2 кН, номінальний тиск від 1 до 11 МПа. Встановлено, що МДО МДО–покриття має кристалічну будову, фазовий склад – високотемпературні модифікації окислу алюмінію (α-Al2O3 і γ- Al2O3), твердість – 18000 – 20000 МПа. Встановлено, що коефіцієнт тертя ковзання пари сірий чавун – МДО–покриття, сталь – МДО–покриття та МДО по МДО знижується до значення 0,01 - 0,013 в умовах мастила. Виявлено, що в парі МДО–покриття – МДО–покриття антифрикційні властивості проявляються в умовах змащування як оливою, так і водою. Низький коефіцієнт тертя для пари покриття-покриття у випадку змащування водою пояснюється високими гідрофільними властивостями оксидних контактуючих поверхонь, що дозволяє рекомендувати їх до використання у підшипниках ковзання (вкладишах) гідротурбін. Зроблено висновок щодо причин, які обумовлюють низький коефіцієнт тертя досліджуваних зразків. Ключові слова: алюмінієвий сплав Д16, чавун, сталь, мікродугова обробка, покриття, фазовий склад, кристалічна будова, окисли алюмінію, товщина покриття, твердість покриття, коефіцієнт тертя, антифрикційні властивості

29 October 2025 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
OSOleksandr Subbotin
Oleksandr Subbotin
VBValery Bilozerov
Valery Bilozerov
VSValeria Subbotina
Valeria Subbotina
VRValentyn Ryaboshtan
Valentyn Ryaboshtan
VBVyacheslav Barannikov
Vyacheslav Barannikov
СФСергій Фесюков
Сергій Фесюков
This paper presents the results of a comprehensive study of the microarc oxidation (MAO) processes of the deformable aluminum alloy AMg6 with an emphasis on the kinetics of coating thickness formation and the evolution of its phase composition depending on electrolyte parameters. Particular attention is paid to the influence of the concentration of liquid glass (sodium silicate - Na2SіO3) and potassium hydroxide (KOH) in the alkaline-silicate electrolyte on the mechanism of formation of the oxide layer, polymorphic phase transformations and their impact on the physical and mechanical characteristics of coatings. It is shown that the formation of the structure and phase composition of coatings occurs by an electrochemical mechanism that depends on the composition of the electrolyte. It has been established that at an increased concentration of Na2SіO3 (12 g/L), thermodynamically favorable conditions are created for the completion of the polymorphic transformation of γ-Al2O3 into α-Al2O3, a thermostable phase that gives the coating high hardness (up to 15 GPa) and electrical insulating properties. Instead, at a reduced content of sodium silicate (6 g/l) and a low concentration of KOH (1 g/l), the predominant formation of a mullite phase (3 Al2O3·2SiO2) was found, which leads to a different coating morphology with reduced mechanical properties but potentially higher thermal stability. The results obtained indicate that adjusting the composition of the electrolyte allows for a controlled influence on the phase composition of coatings and optimization of their properties in accordance with operational requirements. It is proved that only the use of a combined alkaline-silicate electrolyte ensures the formation of a dense, durable coating dominated by the α-Al2O3 phase, which is characterized by increased hardness, corrosion resistance, and durability.The results of the study are of practical importance for improving the processing technologies of aluminum alloys, developing wear and corrosion-resistant coatings with predictable properties, as well as for creating new structural and functional materials for the aviation, automotive, electronics, and energy industries.

1 February 2026
Verified
Book Chapter
Closed access
VSValeriіa Subbotina
Valeriіa Subbotina
VBValerii Bilozerov
Valerii Bilozerov
OSOleksandr Subbotin
Oleksandr Subbotin
VRValentyn Ryaboshtan
Valentyn Ryaboshtan
Vitalii IvanovVitalii Ivanov
Vitalii Ivanov

28 June 2024 in Collection of scientific works of the Ukrainian State University of Railway Transport
Verified
Journal Article
Open access
PDF file
ОВОлег Олексійович Волков
Олег Олексійович Волков
ZKZhanna Kraievska
Zhanna Kraievska
VSValeria Subbotina
Valeria Subbotina
SOSubbotin Oleksandr
Subbotin Oleksandr
HFHanna Fedorenko
Hanna Fedorenko
ГФГанна Анатоліївна Федоренко
Ганна Анатоліївна Федоренко
The study is devoted to the application of the method of surface hardening by friction Object of study - the process of surface hardening by friction.Subject of study - samples of 65G steel the method allows achieving high values of hardness, strength and wear resistance of materials in a short time and at much lower cost compared to other processing methods. The aim and objectives of the study are to investigate the nature of surface hardening of steel samples by friction. To achieve this goal, the following tasks are envisaged: manufacturing samples from 65G steel in the form of plates, preliminary heat treatment of samples for their maximum thermal hardening, hardening of the surface of samples by friction, analysis of the microstructure and microhardness of each sample, comparison of the microstructure, microhardness and depth of hardening of these samples, conclusions on the influence of processing factors on the hardening result. Based on the experimental data obtained, we constructed graphs of microhardness changes in the cross-section of the samples and studied the microstructures. It can be seen that after friction treatment, a layer with a modified structure is formed in the surface of the samples. The microhardness of the surface is significantly higher (approximately 2 times) than the microhardness of the main part in the samples. Metallographic analysis has shown that the layer formed in the samples has a martensitic structure characterized by a higher degree of dispersion and microhardness compared to the martensitic structure obtained during the previous heat treatment. Changes in the microstructure and microhardness of the samples that were surface hardened using different processing modes were compared. Certain differences in the characteristics of their hardened «white» layers were found. It is also shown that the hardened «white» layer is located along the entire length of the surface in the samples and is continuous and homogeneous.

22 May 2026 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
OSOleksandr Subbotin
Oleksandr Subbotin
VBValery Bilozerov
Valery Bilozerov
VSValeria Subbotinа
Valeria Subbotinа
OVOleh Volkov
Oleh Volkov
VBVyacheslav Barannikov
Vyacheslav Barannikov
МКМикита Коптєв
Микита Коптєв
The paper addresses the актуal scientific and technical problem of improving the performance and durability of piston rings in internal combustion engines. Particular attention is paid to reducing weight and dimensional parameters of components, enhancing fuel efficiency, and decreasing harmful emissions. It is shown that traditional materials such as cast iron and steel, despite their advantages, have several significant drawbacks, including high weight, limited corrosion resistance, manufacturing complexity, and environmental concerns associated with protective coating technologies. The feasibility of using aluminum alloys as an alternative material for piston rings is substantiated. It is established that their application is limited by insufficient wear resistance, low modulus of elasticity, and degradation of mechanical properties at elevated temperatures. To overcome these limitations, the use of micro-arc oxidation (MAO) is proposed, which enables the formation of high-strength ceramic-like oxide coatings on the material surface. The features of the MAO process and the mechanism of coating formation based on aluminum oxide (particularly α-Al₂O₃) are analyzed. These coatings are characterized by high hardness, thermal stability, wear resistance, and a low friction coefficient. It is shown that the formed coatings exhibit strong adhesion to the substrate, controlled porosity, and the ability to retain lubricant, which positively affects the tribological performance of contacting surfaces. The experimental part of the study includes the manufacturing of prototype piston rings from D16 aluminum alloy, their heat treatment, and the application of MAO coatings under various technological conditions. The influence of process parameters on the phase composition and properties of the coatings is investigated. It is demonstrated that increasing the treatment duration leads to a higher content of the α-Al₂O₃ phase, resulting in an increase in hardness up to 24 GPa. A комплекс of laboratory tests was carried out, including the evaluation of elasticity, specific pressure, and relaxation resistance of the rings at elevated temperatures. The results show that the application of MAO coatings significantly increases ring stiffness, stabilizes their elastic properties, and ensures compliance with the requirements for conventional designs. It is also established that coated rings exhibit higher thermal stability and lower relaxation compared to untreated samples. Engine bench tests confirmed the effectiveness of the proposed approach: an increase in compression in the cylinders, stability of operational characteristics during operation, and reduced wear were observed. It is demonstrated that aluminum piston rings with MAO coatings outperform traditional counterparts in terms of antifriction, anticorrosion, and heat-resistant properties. In general, the results confirm the scientific validity and technological перспективність of using micro-arc oxidation to enhance the performance of piston rings. The proposed technology can be effectively implemented in mass production, providing improved operational characteristics of internal combustion engines and reducing their environmental impact

27 October 2025 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
OSOleksandr Subbotin
Oleksandr Subbotin
VBValery Bilozerov
Valery Bilozerov
VSValeria Subbotina
Valeria Subbotina
OVOleg Volkov
Oleg Volkov
SKSergey Knyazev
Sergey Knyazev
СФСергій Фесюков
Сергій Фесюков
Aluminum alloys are widely used in a variety of industries due to their lightweight yet strong properties. However, their relatively low wear resistance, hardness, and corrosion resistance limit their long-term operation. The most promising way to improve the performance properties of tribotechnical materials is to create surface layers on parts that have high wear resistance and antifriction. The micro-arc oxidation (MAO) method produces hardened layers on the surface of aluminum alloys. One of the key factors affecting the properties of such coatings is their thickness. Changes in thickness can lead to changes in the phase composition of the coating, which in turn affects its hardness and overall performance. The study of the relationship between the phase composition, hardness, and thickness of MАO coatings is important for understanding the processes that occur in coatings during their production and for optimizing the technological processes of creating protective layers on aluminum alloys. The dependence of the phase composition and hardness on the thickness of MАO coatings on aluminum alloy AK6, formed by the method of microarc oxidation (MAO) in alkaline-silicate electrolyte in the cathodic-anodic mode, was investigated. The structure and morphology of the MАO coatings were investigated. It has been established that the coating on AK6 alloy formed in alkaline-silicate electrolyte has a two-layer structure: a technological layer and a base layer. It is the main layer of the coating that has a practical purpose - it causes surface hardening of aluminum products by the MАO method. The analysis of the coating thickness showed that the coating grows both inside the sample (base layer thickness) and outward with increasing sample size (technological coating thickness). The total thickness of the coating consists of its inner and outer thicknesses. These thicknesses change almost synchronously. It was found that the technological layer (upper loose layer) of the coating is an allowance for further dimensional processing of products. Processing of the obtained results showed that the share of the base layer is 50-60% of the total coating thickness, and the technological layer is 50-40%. The phase composition of MАO coatings was studied and it was shown that the coating has a crystalline structure and consists of high-temperature modifications of aluminum oxides (α- Al2O3 and γ- Al2O3) and mullite (3 Al2O3-2SiO2). The paper shows the possibility of MАO treatment of aluminum alloy AK6 to provide the phase composition of the hardened layer and, as a result, high performance characteristics (hardness) due to the high content of α-Al2O3 modification - corundum in the hardened layer. It has been established that by forming different coating thicknesses, conditions can be created for the formation of the structural-phase state of coatings that ensure the reliability and durability of the mated joints.