1 January 2011 in Transportation Research Record: Journal of the Transportation Research Board
Understanding moisture damage mechanisms in asphalt pavements and evaluating the right combination of materials that are resistant to moisture damage are important. Moisture damage is the loss of strength or stiffness in asphalt mixtures caused by a combination of mechanical loading and moisture. Many test methods have been developed to evaluate loss of adhesion and cohesion in binders. However, a simple procedure to address moisture damage in the asphalt–aggregate interface is not available. The feasibility of the newly developed bitumen bond strength (BBS) test for moisture damage characterization was investigated. An experimental matrix that included various binders, modifications, and aggregates to account for the chemical and physical conditions in the aggregate–asphalt interface was completed. A statistical analysis was performed to verify reproducibility of the BBS test. The results indicated that the bond strength of asphalt–aggregate systems was highly dependent on modification and moisture exposure time. Polymers were found to improve the adhesion between asphalt and aggregate as well as the cohesion within the binder. Results from this study indicated that the BBS test was repeatable and reproducible. To further validate the effectiveness of the BBS test, a comparison of the BBS test results and the modified dynamic shear rheometer strain sweep test was conducted. The comparison showed that the BBS test could rank materials similarly to a more sophisticated and time-consuming test.
1 January 2017 in Construction and Building Materials
20 August 2015 in Road Materials and Pavement Design
Asphalt binder is always present in contact with fine and coarse mineral particles in the pavement and roofing shingles. Therefore, the mechanisms of oxidative ageing of binders are expected to be influenced not only by the characteristics of the binder but also by the properties of the mineral surface due to the molecular interaction between these two components. The purpose of this study is to develop a fundamental understanding of the mechanisms of interaction between binder and filler and the resulting changes in the molecular size distribution (MSD) after oxidative ageing. In this study, a method to characterise the behaviour of mastics (binder mixed with mineral dust) with ageing was developed by using the Pressure Ageing Vessel. The changes due to this ageing is measured by monitoring the mastics |G*| ageing index (ratio of complex modulus before and after ageing). The results clearly indicate that fillers can significantly change the effect of oxidative ageing of binders. Gel Permeation Chromatography testing results supported mentioned findings regarding |G*| changes, as the presence of mineral filler appears to decelerate the rate of production of larger molecular size oxidation products in the binder phase of mastics. Implication of the findings is that change in MSD of asphalts during ageing – a controlling factor in mechanical and thermo-volumetric behaviour – can be engineered by proper selection of fillers in the mastic phase. It is thus concluded that by selecting a proper type and concentration of filler, ageing of pavement, or roofing shingles and, consequently, durability and performance, can be controlled.
1 January 2015 in Transportation Research Record: Journal of the Transportation Research Board
Aging of asphalt binders is induced by chemical or physicochemical changes during production of pavement and throughout its service life. Although binder aging in pavement always occurs while binders are in contact with aggregates and mineral filler, in most laboratory aging studies and in current specifications, asphalt binders are individually aged without accounting for aggregate induced interactions. Past research has had conflicting findings, as it attributes mitigating or catalytic effects to the presence of mineral fillers in asphalt binders with oxidative aging. Thus, in the present study it was hypothesized that evaluation of asphalt oxidative aging without taking into account the interactive effect of the presence of mineral fillers was inadequate as a specification tool. The effect of mineral fillers on oxidative aging of asphalt was investigated with accelerated aging of mastics (asphalt and fillers) in a pressure aging vessel (PAV) and by measuring the changes in stiffness and glass transition temperature ( Tg). The testing matrix included an aging evaluation of mastics containing different fillers, mineralogy, and surface area. The results showed that the low-temperature behavior of aged mastic could be modified by controlling filler concentration and type. The fillers acted as an agent adsorbing heavy fractions of asphalt binder and therefore reduced stiffness and changing Tg. During oxidative aging of asphalt binders and mastics, diffusion and adsorption mechanisms played a role in the rate of aging of asphaltic material. The results provided insight on the potential for selecting a mineral filler concentration and mineralogy type to reduce the impact of oxidative aging and possibly improve the service life of pavement.
1 January 2013 in Transportation Research Record: Journal of the Transportation Research Board
The purportedly higher moisture susceptibility of emulsified asphalt mixtures relative to traditional hot-mix asphalt is a primary concern limiting their more widespread use. Of the factors contributing to moisture susceptibility in cold-mix asphalt (CMA) that can be controlled by mix designers, aggregate coating is one of the most obvious physical means to reduce this distress. More complete aggregate coating is expected to help limit the moisture susceptibility of CMA by reducing the amount of water that can be absorbed into exposed aggregate. This paper refines a recently developed method to quantify aggregate coating in CMA by using digital imaging analysis and applies the procedure to several aggregate–emulsion systems to isolate factors most directly affecting aggregate coating. After the most significant factors were identified, a regression analysis of the coating matrix was used to develop quantitative models to predict coating of aggregates in CMA as a function of mix design parameters. Models were used to predict several representative levels of aggregate coating, and laboratory-compacted candidate mixtures were assessed for workability and moisture susceptibility by using a compactability parameter and modified tensile strength ratio test, respectively. Results show that the workability and moisture susceptibility of CMA are highly dependent on the level of aggregate coating predicted by the quantitative models; this finding suggests that the imaging procedure can be used not only to reliably predict aggregate coating in CMA but also to develop practical, performance-based limits on plant-produced CMA mixtures in terms of aggregate coating.
17 February 2023 in Road Materials and Pavement Design
This study characterised two bio-binders (named Bio A and Bio B) derived from pine wood resins and designed for full replacement of asphalt binder. Bio A and Bio B were compared to a petroleum-based asphalt binder (AC 30/45). Elemental analysis, Fourier-Transform Infrared Spectroscopy, Gas Chromatography-Mass Spectrometry, Thermogravimetric analysis, and Linear Viscoelastic characterisation were applied to evaluate the materials studied. The susceptibility to aging was evaluated by comparing unaged and short-term aged samples of the three binders. Bio A showed a penetration grade of 29 (0.1 mm) and softening point of 55.2°C, while Bio B showed 21 (0.1 mm) and 57°C, respectively. AC 30/45 showed a penetration grade of 30 (0.1 mm) and softening point of 55°C. Bio B was found as more prone to aging than Bio A and AC30/45. This result might be related to the higher presence of saturated fatty acid methyl esters in Bio B.