10 May 2021 in IEEE Electron Device Letters
To meet the need to transmit increasingly massive volumes of data, a more than 3 kW continuous wave (CW) Ka-band sheet beam traveling-wave tube (SB-TWT) is reported for the first time. Working under unsaturated drive, the maximum gain obtained is 29 dB with a sheet beam of 30.9 kV, 0.82 A, and the efficiency exceeds 24% with a single-stage collector depressed to −15 kV. The 1-dB bandwidth reaches 6 GHz from 26 GHz to 32 GHz and the bandwidth with output power greater than 2 kW can even reach 7GHz from 26 GHz to 33 GHz. The realization of 99.8% static transmission as well as over 97% actual CW transmission of sheet beam is verified successfully, which benefits from adopting periodic cusp magnet (PCM) focusing, and thereby total weight is less than 15 kg. The relevant experimental details are introduced in this letter.
9 March 2021 in IEEE Electron Device Letters
In future electronic devices, the trade-off between power capacity and thermal management will be a severe challenge. In this letter, a sheet beam slow-wave structure (SB-SWS) has been proposed to realize high-power output while taking into account cooling design inside the traveling-wave tubes (TWT). The design of the modified structure ensures a sufficient axial electric field component to realize efficient interaction, meanwhile expands the width of the metal vanes by 327% to design micro-channel cooling. The power load capacity for electronic interception increased by 25%. Utilizing all-period optimization technology, the maximum output power can reach 4 kW, corresponding 18.8% electronic extraction efficiency. Also presented further is a proof-of-concept design model of Ka-band for practical test. The consistency between experiment and theory shows that this SWS is not only suitable for microwave frequency band, but more suitable for future miniaturized devices in sub-millimeter wave and terahertz bands.
25 January 2021 in IEEE Transactions on Terahertz Science and Technology
Sheet beam vacuum electron tubes are an attractive solution for high-power sources or amplifiers at millimeter-wave and terahertz range. In this article, a high-order coalesced TM 11 -like mode operation for 220 GHz sheet beam traveling-wave tube is proposed. The feasibility of coalesced TM 11 -like mode operation is investigated. The utilization of high-order mode expands the RF circuit power capacity, increases the beam current and reduces the cathode emission density. The self-consistent nonlinear code and three-dimensional particle-in-cell simulations are used to verify the 6.7% beam-wave interaction at 220 GHz without phase matching optimization. The maximum output power reaches 370 W. The results demonstrate this methodology is a good solution to build a high-power device for a wide region of terahertz.
1 December 2022 in IEEE Electron Device Letters
In response to the urgent requirement for a high-power millimeter-wave system with small size, low cost, and excellent maneuverability in W-band, a compact high average power sheet beam extended interaction oscillator (SB-EIO) based on periodic cusp magnet (PCM) is designed, fabricated, hot tested and reliability verified. The maximum output power is 10.2 kW at a working duty of 1%. When the duty is increased to 27%, an average power of 2.2 kW is achieved, corresponding to a $400 \mu \text{s}$ pulse and 675 Hz repetition frequency. The device can be repeatedly turned on and off quickly during a 6-minute operating time and the single longest running time exceeds 60 min. The 96.0% transmission rate of the sheet beam (45.5 kV, 2.49 A) is verified. The overall weight of SB-EIO including the magnet and external package is less than 10 kg, which is ideal for equipping movable platforms.
12 March 2021 in IEEE Transactions on Microwave Theory and Techniques
This article proposes a longitudinal output structure in Ka-band sheet beam traveling-wave tube (SBTWT) with an ultrawideband transmission and high breakdown collector voltage. A novel electromagnetic bandgap (EBG) cutoff structure is designed to separate the slow-wave structure (SWS) and the depressed collector. The large stopband property of the EBG structure is applied to achieve not only the high transmission and the low gap leakage but also the long gap distance to provide a high breakdown voltage of the depressed collector. The 3-D simulations of a single longitudinal structure show a full Ka-band (26.5–40 GHz) reflection of less than −20 dB and gap leakage less than −0.02 dB. The entire longitudinal output collector, including two large gaps cutoff structures and the over mode electron collecting parts, is designed and manufactured. The simulations show a bandwidth of 10.4 GHz with a reflection coefficient ${S} _{\mathbf {11}}$ of lower than −20 dB. The cold test demonstrates the wild bandwidth of ~11.1 GHz with a reflection coefficient ${S} _{\mathbf {11}}$ of lower than −15 dB. The hot test reveals a stable collector dc voltage of −14.2 kV.
20 October 2021 in IEEE Transactions on Electron Devices
This article explores an extremely high beam–wave interaction (BWI) efficiency technology of sheet beam traveling wave tubes (SBTWTs). An all-period phase velocity tapering optimization method is proposed to improve BWI efficiency of slow wave structure (SWS). The effects of the special electron bunching state and synchronous phase velocity change on the improvement of BWI efficiency generated by this method are analyzed. To solve the computational burden caused by dozens of parameters, self-developed 1-D nonlinear BWI code is used to calculate the BWI. For the best optimization effect, particle swarm optimization (PSO) algorithm selected from a variety of algorithms is utilized to search for the global optimal solution. The PIC simulation verification results show that by the all-period optimization method, the 80-period staggered double vane (SDV) SWS achieves a stable output power of 18 kW with 31 kV voltage 0.9-A current sheet beam at 30 GHz. The BWI efficiency of all-period phase velocity tapering SWS has reached 64.5% at center frequency, the efficiency between 28 and 35 GHz exceeds 40%.