30 January 2021 in Mathematical Problems in Engineering
The premise of analyzing and researching robot technology is to establish a proper mathematical model and then to solve it with kinematics. In this study, a self-developed humanoid hydraulically driven dual-arm robot is taken as the research object, and the DH (Denavit–Hartenberg) parameter method and the rotational exponential formula (POE) are used to solve the kinematics of the robot. The calculation results are verified by simulation. The advantages and disadvantages of the two methods are analyzed. The differences between the two methods are compared. It lays a foundation for other scholars to choose mathematical models when analyzing the mechanism in the future.
13 January 2021 in IEEE Access
In order to obtain and analyze the operator’s intention comprehensively and accurately in human-robot interaction, an array-type flexible tactile sensor was designed. The sensor was encapsulated into a tactile handle to sense the grasping state of the human hand in real time. According to the analysis of different operators’ grasping posture and grasping habits, the grasping state was defined as 5 modes. Based on Harris feature point positioning and extraction, a method of grasping posture conversion was proposed to ensure the completeness and standard of the extracted grasping features. A set of Convolutional Neural Networks (CNN) suitable for the real-time classification of the grasping intention was built to distinguish the grasping state sensed by the handle in real time, accurately determine the operator’s intention, and complete the interaction with the robot. Using a UR collaborative robot as the experimental platform and the haptic handle as the intent sensing device, the intent-behaviour mapping relationship was constructed to control the motion of the UR collaborative robot. The experimental results show that the classification accuracy of operation intention is as high as 97.87%.
1 November 2020 in International Journal of Advanced Robotic Systems
In the installation process of large-scale external cladding, the labor intensity is high, and it is dangerous and hard to guarantee good construction quality. In view of these issues, this study designs a construction robot for external cladding installation, as a better solution. First, the advantages and disadvantages of the current building external cladding hanging process are discussed. The components, suitable for automatic installation, are selected to develop an automatic installation process for the building external cladding. According to the process steps and installation action flow, the installation robot is first adjusted. After the design of a step-by-step workflow of positioning and installation, a robot with a six-degree-of-freedom string-mixing mechanism is designed. Finally, a prototype of the proposed external cladding installation robot is developed, and the system is experimentally verified under simulation conditions and real operation. The test results show that the external cladding installation robot system has a strong theoretical basis. The series-parallel hybrid six-degree-of-freedom structure is reasonable, design wise. It helps to complete the automatic installation of the building external cladding and improve the automation level of large-scale plate installations.
29 April 2019 in Advances in Mechanical Engineering
In order to meet the requirements of mechanization and automatic installation of high-altitude boards, a hybrid high-altitude board installation robot is designed. At the same time, a method based on screw theory is proposed to avoid the defects of kinematics analysis of robots using the traditional Denavit–Hartenberg parameter method. It is to construct a kinematic equation for the hybrid robot. According to the kinematics equation of the robot, the forward solution of the end-effector position is obtained. Besides, the workspace cloud image of the robot end-effector is worked out by MATLAB. By means of the equation to test the kinematics of the robot, the absolute error is 0.5 mm between the theoretical value and the actual value of the end-effector coordinate system position. It meets the national standard for board gaps. This study provides reference for subsequent research works on control technique and trajectory planning of the hybrid robot of high-altitude board installation.
2 December 2020 in IEEE Access
A multi-objective trajectory planning method for redundantly actuated parallel manipulator under hybrid force and position control is proposed considering the coordination of its driving forces. Combining inverse kinematics analysis, the driving force coordination of the manipulator is analyzed using the virtual work principle. On this basis, the B-spline curve is used to plan the motion trajectory of the end-effector of the manipulator in the Cartesian space. Subsequently, the driving force coordination, total motion time, and maximum absolute value of the jerk impulse of the actuator are defined as objective functions, and a multi-objective optimization problem is solved using the multi-objective particle swarm algorithm (MOPSO). Finally, the potential optimal solution is selected by constructing a comprehensive optimal evaluation function. The trajectory simulation results verify that the trajectory planning method is effective and universal.
10 August 2021 in Journal of Robotics
When the two arms of the robot are transporting the heavy loads together, a new parallel mechanism is formed. The actuator input selection and optimization of the parallel mechanism are basic and important problems in mechanism research. In this paper, a 2-RPPPS dual-arm robot is taken as the research object. Firstly, based on the screw theory and input selection principle, 158 reasonable schemes are obtained. Then, an evaluation mechanism is established to screen out the schemes that do not conform to the input selection principle. Then, the end effector of the parallel mechanism moves along two different trajectories. Using the particle swarm optimization algorithm, the inverse kinematics solution of each trajectory is obtained, and the velocity and acceleration of each actuator under different trajectories are obtained. Finally, the motion stability of each actuator is evaluated, and the best scheme is selected. The results show that the best input scheme can be selected according to different trajectories, so as to improve the performance of the parallel mechanism. To the authors' knowledge, no one has done any research on selecting the appropriate input scheme according to the trajectory of the end effector.