The emissions of volatile organic compounds (VOCs) have hazardous effects on humans and the environment, and hence they should be detected and reduced. In this study, polybenzoxazine (PBZ) and amine-functionalized multiwall carbon nanotube (MWCNT) composites were synthesized as a sensor for VOCs. MWCNT were functionalized with two types of diamines, namely, 1,6-hexanediamine (HDA) and phenylenediamine (PDA). HDA or PDA treated MWCNTs were loaded into the benzoxazine matrix with different weight percentages (0.1, 0.3, 0.5, and 1%). FTIR analysis confirmed the chemical attachment of the two types of diamines on MWCNT. XRD diffraction and scanning electron microscopy (SEM) were used to investigate the nanofillers morphology and clarify the differences between pristine and amine-functionalized MWCNT. Thermal gravimetric analysis (TGA) was used to study the composites’ thermal stability and degradation behavior. It was found that, in contrast to neat PBZ, the major degradation temperature of PBZ/0.5%MWCNT-PDA nanocomposites were enhanced by 10%. The electrical conductivity of PBZ was 6.32 × 10–9, which was enhanced to 6.11 × 10–7in the composites with 1% MWCNT-PDA. This material was tested as a VOCs sensor for methanol, acetone, and toluene and showed that PBZ/1% MWCNT-PDA composite responded to all the vapors.
18 April 2022 in Separation Science and Technology
Dyes discharged into waste streams have threatened the lives of aquatic ecosystems and human beings. This work studied the effectiveness of converting polypropylene (PP) waste films into sulfonated microparticles (SPP) for removing methylene blue dye (MB) from aqueous solutions. PP waste was recycled into microparticles (8 µm) and sulfonated in sulfuric acid at 100°C for (6 h). FT-IR analysis proved the existence of sulfonic, carboxylic, and C = C groups on the surface of SPP microparticles. The concentration of acid groups, morphology, surface area, and wettability of SPP were investigated. The effects of the adsorbent dosage, contact time, pH of MB solution, temperature, and ionic strength on the adsorption process were studied. The experimental data of the adsorption process fit well with pseudo-second-order kinetic model and Langmuir isotherm disclosing that the adsorption was chemisorption. A maximum adsorption capacity of 45 mg MB g−1 SPP microparticles was realized at 20°C and neutral pH (6.5). The free energy change showed a negative value reflecting the feasibility and spontaneity of the adsorption process. Accordingly, waste PP can be recycled into a valuable adsorbent for the removal of cationic dyes from polluted water after a proper treatment such as sulfonation. Graphical abstract
5 December 2022 in Journal of Applied Polymer Science
Cleaning wastewater from harmful dyes is mandatory to keep the safety of humans and other lives forms. In this study, hybrid polypropylene/metal hydroxide microparticles were presented for the removal of reactive yellow 145 (RY145) from aqueous solutions. The chemical structure and morphological features of the adsorbent were studied by Fourier transform infrared (FT-IR), energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM). To achieve high adsorption efficiency, the adsorption process was optimized using different adsorbent doses, pH of the medium, time intervals and temperature. Kinetic and isotherm models were utilized to analyze the adsorption data. The pseudo-second order and Langmuir models showed the best fit for the adsorption process. A maximum adsorption capacity of 39.62 mg g−1 was attained at 25 °C and neutral pH. The thermodynamic parameters of the adsorption process were estimated. The adsorption process increased by increasing temperature revealing that the adsorption is endothermic (∆ H = 25.52 kJ mol−1 K−1) but random (∆S = 90.61 J mol−1 K−1) and feasible (∆G = − 1.48 kJ mol−1). Hence, it can be concluded that the adsorption process was endothermic but random and feasible. Graphical Abstract
Ultraviolet radiation (UV) accelerated the degradation and cracking of polymers. Our work focused on delay thedegradation rate of unsaturated polyester outdoor by loading Carbon black (CB) and carbon nanoparticles (CNP). Weprepared composites and nanocomposites from modified unsaturated polyester (UPEG) as a matrix with different wt.%.of Carbon black (5%, 10%, 20%, and 30%CB) and carbon nanoparticles (0.1%,0.2%,0.3%,0.4%, and 0.5%CNP). X-raydiffraction and a High-resolution Transmission electron microscope investigated the morphology and surface ofnanohybrid materials, showed the significant homogeneity and good dispersion of CNP into the UPEG matrix. Fouriertransforms infrared detected the change of structure (UPEG) when compared with the neat resin. QUV acceleratedweathering tester investigated the effect of wt. percentage and types (micro or nano) of filler in the degradation processof the modified unsaturated polyester resin. Mechanical properties (tensile strength and Hardness shore D) were donebefore and after the exposure of the sample to UV degradation. Hardness was improved with CNP than CB filler even athigh content of 30% CB. The UPEG/CNP had high stability and their rate of degradation was more slowly than in netresin, also when it comparison with UPEG/CB hybrids. The thermal stability of UPEG/ CNP was enhanced compared tothat of unfilled UPEG and determined by Thermal gravimetric analysis.