2 November 2022 in IEEE Transactions on Energy Conversion
Battery modelling plays a critical role in battery management tasks. A model that provides accurate estimations of state of charge and state of heath in varying operating conditions could significantly improve the performance of battery management systems. Departing from existing literature, this paper presents a self-adaptive Piecewise Equivalent Circuit Model (PECM) based on Extended Kalman Filter (EKF). While traditional Equivalent Circuit Models (ECM) are typically parameterized and validated for a specific range of working conditions (temperature, current and etc.), PECM is able to adapt itself to any working condition in real time. Established in the form of a combination of linear and nonlinear piecewise functions, the model parameters are continuously adjusted based on the measurement of voltage, current, and temperature. Another advantage of PECM is it does not require any prior tests in the lab, for example the Open Circuit Voltage (OCV) test which is time consuming and needs to be calibrated when aged. PECM is accurate, flexible and efficient. It has been validated for different battery chemistries, duty cycles, and temperatures. Furthermore, PECM comes with the State of Charge (SOC) and State of Health (SOH) estimation, which is shown in the model validation process and the degradation study. The results demonstrate that the piecewise parameter adaptation proposed in this paper can be applied to a range of different battery chemistries and at different aged states.
8 January 2019 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
This paper studies the behaviour of a nonlinear aircraft model under optimal control for aircraft ground manoeuvres, specifically for high-speed runway exits. The aircraft's behaviour on the ground is captured by a fully parameterised 6-DOF nonlinear model, which is developed in this work to model the effects of braking through a combined slip tyre model. A pre-defined cost function is minimised using a generalised optimal control algorithm to obtain an optimal control sequence for a particular manoeuvre-cost function combination. In this paper, three scenarios are investigated for a 45-degree high-speed runway exit: the first control sequence minimises the distance between the aircraft's centre of gravity and the runway centreline; the second maximises the distance travelled by the aircraft during the 20 s of simulation time; the third minimises tyre wear. For each scenario, the generalised optimal control algorithm provides the best possible control inputs. The dynamic response of the aircraft throughout the turn is shown to be dominated by its inertia, which suggests that future controllers will need to begin executing a turn far in advance of entering the corner. The results also provide a benchmark against which the effectiveness of future real-time controllers may be judged.
1 December 2014 in Advances in Mechanical Engineering
In this paper, we present a real-time optimal controller, Predictive Steering Control (PSC), to perform high-speed runway exit manoeuvres. PSC is developed based on a time-varying LQR with look-ahead. The aircraft’s ground dynamics are described by a high-fidelity nonlinear model. The proposed controller is compared with an Expert Pilot Model (EPM), which represents a pilot, in several different speed runway exit manoeuvres. With an improved road preview mechanism and optimal feedback gain, the predictive steering controller outperforms the expert pilot’s manual operations by executing the runway exit manoeuvre with a lower track error. To investigate the optimality of PSC, its solution is further optimised using a numerical optimal controller Generalized Optimal Control (GOC). PSC is shown to be close to the final optimal solution. To study robustness, PSC is tested with various aircraft configurations, road conditions and disturbances. The simulation results show that PSC is robust to disturbances within a normal range of operational parameters.