14 October 2021 in IEEE Transactions on Antennas and Propagation
In this article, a compact and low-profile beam steering circularly polarized folded reflectarray antenna (CPFRA) with low scan loss for wide-angle coverage is proposed and designed. In order to obtain lower scan loss over a wider beam coverage range (BCR), a multibeam optimization method considering the illumination weighting factor is introduced to obtain minimum phase errors for the designed beam direction. To improve antenna compactness and alleviate the mutual couplings among multiple feeding sources, small-size substrate integrated waveguide (SIW) cavity-backed slot antennas are employed as the feeding sources, which are integrated with the single-layer reflector board. An incident-angle-insensitive circular polarizer is designed and integrated over the antenna aperture to achieve circularly polarized (CP) radiation over a wide BCR. Finally, a 15-beam CPFRA working at the Ka-band with a size of 140 mm $\times140$ mm is designed, manufactured, and measured to validate the proposed design method. Measurement results show that the designed CPFRA can achieve a rather flat gain, with only a 2.1 dB scan loss, across the wide 3 dB BCR of ±29°. The good CP beams are formed over the entire coverage range without any blind zone. With the advantages of wide-angle coverage, low scan loss, and high integration, the proposed beam steering antenna is promising in applications such as 5G communication, radar imaging, and target recognition.
14 June 2021 in IEEE Access
In this paper, a low-profile folded reflectarray (FRA) assembled by an anisotropic metasurface is proposed to generate high-efficiency and broadband orbital angular momentum (OAM) vortex waves in the Ka band. In order to suppress the mutual coupling and increase the polarization conversion efficiency, a dual-polarization phase matching method (DPPMM) for helical wavefront construction is developed to achieve minimum phase compensation error in the orthogonal direction. A compact subwavelength anisotropic meta-atom with orthogonal || |-shaped structure is designed to achieve flexible wavefront manipulation and high-resolution phase compensation for x and y-polarization incident waves. After the optimization design, nearly 100% cross-polarization conversion efficiency for the anisotropic metasurface can be achieved at the working frequency of 12 GHz. To validate the proposed design method, an OAM FRA with 24×24 meta-atoms is fabricated and measured. The measurement results show that the aperture efficiency of the proposed FRA carried with the OAM mode l = 1 is significantly improved and reaches 20.2%. Moreover, the OAM bandwidth and 3-dB gain bandwidth reach 22.5% and 25%, respectively.