Group for Advanced Receiver Development, Onsala Space Observatory, Department of Space, Earth and Environmental Sciences, Chalmers University of Technology, Gothenburg, Sweden
Auto-generated profile, based on publicly available information
François Joint
Group for Advanced Receiver Development, Onsala Space Observatory, Department of Space, Earth and Environmental Sciences, Chalmers University of Technology, Gothenburg, Sweden
In conventional metal-oxide semiconductor (CMOS) electronics, the logic state of a device is set by a gate voltage (VG). The superconducting equivalent of such effect had remained unknown until it was recently shown that a VG can tune the superconducting current (supercurrent) flowing through a nanoconstriction in a superconductor. This gate-controlled supercurrent (GCS) can lead to superconducting logics like CMOS logics, but with lower energy dissipation. The physical mechanism underlying the GCS, however, remains under debate. In this review article, we illustrate the main mechanisms proposed for the GCS, and the material and device parameters that mostly affect it based on the evidence reported. We conclude that different mechanisms are at play in the different studies reported so far. We then outline studies that can help answer open questions on the effect and achieve control over it, which is key for applications. We finally give insights into the impact that the GCS can have toward high-performance computing with low-energy dissipation and quantum technologies.
The control of a superconducting current via the application of a gate voltage has been recently demonstrated in a variety of superconducting devices. Although the mechanism underlying this gate-controlled supercurrent (GCS) effect remains under debate, the GCS effect has raised great interest for the development of the superconducting equivalent of conventional metal-oxide semiconductor electronics. To date, however, the GCS effect has been mostly observed in superconducting devices made by additive patterning. Here, we show that devices made by subtractive patterning show a systematic absence of the GCS effect. Doing a microstructural analysis of these devices and comparing them to devices made by additive patterning, where we observe a GCS, we identify some material and physical parameters that are crucial for the observation of a GCS. We also show that some of the mechanisms proposed to explain the origin of the GCS effect are not universally relevant.
Local control of superconducting circuits by high-impedance electrical gates offers potential advantages in superconducting logic, quantum processing units, and cryoelectronics. Recent experiments have reported gate-controlled supercurrent in Dayem bridges made of metallic superconductors, mediated by direct current leakage, out-of-equilibrium phonons, or possibly other mechanisms. However, a time-domain characterization of this effect has been lacking. Here, we integrate Dayem bridges made of niobium on silicon into coplanar waveguide resonators and measure the effect of the gate voltage at steady state and during pulsed operation. We consider two types of arrangements for the gate: a side-coupled gate and a remote injector. In both cases, we observe sizable changes in the real and the imaginary part of the constriction's impedance for gate voltages of the order of 1 V. However, we find striking differences in the time-domain dynamics, with the remote injector providing a faster and more controlled response. Our results contribute to our understanding of gate-controlled superconducting devices and their suitability for applications.
25 June 2025 in IEEE Transactions on Electron Devices
This article investigates trapping mechanisms in AlGaN/GaN high electron mobility transistors (HEMTs) at cryogenic temperatures (CTs) down to 4.2 K, using pulsed I–V and drain current transient spectroscopy (DCTS) measurements. The results revealed an overall increase of trapping effects at CT. In particular, a substantial increase in current collapse at low temperatures was observed and predominately ascribed to deep acceptor states stemming from the iron (Fe)-doped GaN buffer. In contrast, devices with undoped buffer presented limited signs of trapping, which were only linked to surface and access regions. The aggravation at low temperatures of trapping effects was linked to a slower detrapping dynamic at low temperatures. Furthermore, the incorporation of gate field plates (FPs) led to a substantial attenuation of trapping and reduction of current collapse by a factor of 2.6 at CT in Fe-doped devices. These latter features were ascribed to the ability of the FP to decrease the electrical field along the device, highlighting the increased impact of FP at CTs. The results suggest that an undoped buffer with optimized gate FP could help to improve the reliability of GaN devices at low temperatures.
1 January 2026 in Superconductor Science and Technology
We report a Nb/Al-AlN/Nb superconducting tunnel junction process in which the AlN barrier is formed by plasma nitridation using a compact microwave electron cyclotron resonance (ECR) nitrogen plasma source integrated into a standard sputter cluster. This enables growth of uniform tunnel barriers across a broad range of specific resistances, with down to . Junctions maintain excellent quality, exhibiting at the highest barrier transparencies. We characterize resistivity, specific capacitance, and the evolution of junction parameters under room temperature aging and thermal annealing. A consistent calibration of the junction specific capacitance
C
s versus is established and independently validated by the performance of demonstrator SIS mixers designed using the extracted
C
s .