6 August 2024 in Modern technology, materials and design in construction
OVOlexander V. Voitsehivskiy
Olexander V. Voitsehivskiy
ОВОлександр Владиславович Войцехівський
Олександр Владиславович Войцехівський
The article considers the solution of the scientific and practical problem of specifying the shear capacity of reinforced concrete bridge beams. Solution of the problem is based on example of the reconstruction of the bridge across the river Southern Buh in Chernovol street in Vinnytsia. These beams with a span of 7.5 m rest on the upper structures of the main spans of the bridge with a length of 45 m. Calculations according to current standards showed that the shear capacity of the beams is insufficient and they need to be strengthened. Additional research by the field test method made it possible to specify the actual level of stresses in the cross-sections of bridge beams and the actual nature of cracking along length of beams. Based on these data, repeated calculations were made to check the shear capacity of the bridge beams. These calculations made it possible to identify additional reserves of the bearing capacity of the inclined cross-sections of the beams and to abandon the need for strengthening. The identified reserves of the shear capacity are partially due to a cautious approach when determining and taking into account the initial data for the calculations of structures that have been operated for a long time without proper technical support. In addition, modern standards for the design of reinforced concrete structures in terms of ensuring the shear capacity do not allow taking into account the peculiarities of the operation of reinforced structures, are based on simplified models of the operation of reinforced concrete beams at the supporting sections and therefore require further development and improvement.
18 December 2025 in Мінеральні ресурси України
Представлено комплексний підхід до оптимізації моделювання каолінових покладів із застосуванням геостатистичних методів просторової інтерполяції. Для підвищення точності прогнозування мінеральних ресурсів здійснено порівняльний аналіз різних методів інтерполяції, зокрема Inverse Distance Weighting (IDW) та Kriging, з акцентом на їх ефективність при моделюванні просторової мінливості хімічного складу корисної копалини.Головною методологічною основою дослідження є геостатистичний аналіз, що включає варіограмний аналіз, просторову інтерполяцію та статистичну обробку даних. Зокрема, додатково проведений кореляційний аналіз хімічного складу каоліну дозволив виявити взаємозв’язки між вмістом Al2O3 та TiO2. Встановлені залежності покладені в основу подальшого моделювання із застосуванням Co-Kriging у програмному середовищі GEOVIA Surpac. Побудовані моделі засвідчили високий рівень відповідності прогнозних значень даним геологічної розвідки, що підтверджено статистичними методами оцінки точності, такими як Root Mean Square Error (RMSE) та Correlation Coefficient (CC).
13 June 2025 in Modern technology, materials and design in construction
In the paper have been considered solving of important scientific and practical problem of modeling the stress-strain state of multi-element beam structures of emergency reinforcement of precast reinforced concrete ribbed slabs on the example of a real office building of the "Vinnytsia Innovation and Technology Park", which is being designed on the territory of the former production premises of the "Krystal" plant. These covering slabs, which serve to support the layers of a flat roof, have suffered significant force damage during long-term operation, that is, they have all the signs of reaching the first and second groups of limit states. But their replacement, due to late detection of defects and economic factors, was virtually impossible. In addition, have been formulated an additional requirement for design solutions regarding the minimum protrusion (bulging) of reinforcement structures from under the slab clearance to ensure the design construction height of the ceiling of the premises under the emergency slabs by the request of the project architect. Therefore, during the above-mentioned scientific and practical works, there was a need to develop a non-standard reinforcement method, namely, compact beam structures with the complete exclusion of defective reinforced concrete floor slabs from the work. Have been offered a reinforcement solution in the form of a system of low-height cross-section beams, often supported from the bending plane by bent profiles. The authors of the scientific research also solved the difficult task of ensuring the inclusion of the offered multi-element system of compact steel reinforcement beams in the overall operation of the load-bearing structures of the coating by temporarily leveling and unloading the emergency structures with jacking systems and wedging all elements. Have been developed a rational technological sequence of work, in which special attention was paid to safety issues in general and fire safety of reinforced structures in particular. Have been successfully implemented in practice the constructive and technological proposals presented in the paper.
6 August 2024 in Modern technology, materials and design in construction
КККатерина Павлівна Криклива
Катерина Павлівна Криклива
In the paper have been justified the possibility of repurposing large-sized hermetic tanks of chemical production, which is in a state of idleness, for the storage and transshipment of petroleum products. Have been considered the solution of an important scientific problem of the development of methods of finite-element modeling of the stress-strain state of tanks structures for the storage of liquid petroleum products under the influence of vacuum which can occur during their emergency emptying. Detailed modeling of the stress-strain state of the tanks have been performed on the example of a tank with a volume of 20,000 m3, built in conditions of potentially increased seismic activity. Have been given the main results of the inspection of the structure, including the measurement of geometric deviations from the project, which were acquired during long-term operation. Have been described defects and damage that occurred at various stages of the structures life cycle, including the data from measurements of losses of metal structures from corrosion. Have been identified possible forms of loss of structure stability for an idealized model of a cylindrical structure and for a model of a structure with geometry defects. Have been taken into account the specified imperfections of the tanks geometry and corrosion reduction of the wall thickness in the modeling. Have been determined the coefficients of the reserve of stability and have been revealed the effect of reducing the margin of stability with significant of the forms distortion. Has been clarified the location of the most stressed and overloaded areas, which were identified at the previous analytical stages of research. Have been proven that the spherical frame roof of the structure cannot withstand the design loads from the vacuum 50 mm water column due to possible co-directional snow impact on the roof, not taken into account by the soviet designers. It is emphasized that the largest deformations of the structures, and also, the initialization of the initial distortions of areas that may lose stability, occurs in the area of detected geometry defects. Have been confirmed the results of the analytical determination of the permissible vacuum limit, which the construction structures of the tank can still withstand. The calculated program value of negative pressure, at which there are no signs of loss of stability, have been recommended to be entered into the technical regulations for the operation of the structure as a limit.
13 June 2025 in Modern technology, materials and design in construction
ІМІрина Вікторівна Маєвська
Ірина Вікторівна Маєвська
In the paper have been considered modern design options of arranging waterproofing coatings for the carriageway and sidewalk parts of girder bridge structures with a monolithic reinforced concrete overlay slab to ensure its impermeability and durability. Have been conducted a comprehensive analysis of the advantages and disadvantages of waterproofing technologies and materials currently available on the Ukrainian market based on our own practical experience, as well as on the research of well-known domestic and foreign scientist. Have been considered the problems and risks associated with damage to protective isolation layers, which ultimately results in significant costs for major repairs of the supporting structures of bridge spans. Among the many alternative options, the most rational option of multilayer insulation was selected according to the integral cost criterion, which occurred in the settings of the waterproofing membrane, obtained by deep impregnation of the surface layers of concrete with siloxane or methyl methacrylate polymers, covering them with a waterproofing layer with the formation, after hardening of the waterproofing components, of a concrete-polymer high-strength, wear-resistant and impermeable layer, which reliably adheres to the asphalt pavement of the roadway due to an additional adhesion layer. Have been considered conducting scientific research, structural and technological issues of installing a waterproofing membrane, among which the preparation of the concrete surface for applying impregnating isolation materials (primer layer) and the localization and elimination of initial defects of the solid base should be especially highlighted. Have been considered the design aspects related to the organization of a continuous insulating layer, together with the isolation of the pavement part of the span structure and the issue of adhesion of the layers of the base-isolation-road surface system. Have been proven that the structural integrity of waterproofing is the key to its high durability. The work emphasizes the importance of organizing end-to-end quality control of isolation work at all production stages, which ensures a long planned warranty period of operation of the moisture-proof span structure. The offered structural isolation solution have been implemented in the conditions of a real construction site during the overhaul of the spans of the bridge structure in the city of Gaisyn across the Sib River at km 484+370 of the national highway M-12 Stryi-Ternopil-Kropyvnytskyi-Znamyanka on the roadway and sidewalk parts using Eliminator technology, developed by the British company Stirling Lloyd. Theoretical studies of the durability of waterproofing works have been confirmed by many years of trouble-free operation of the hydromembrane under conditions of active operation