Jiping Li

Jiping Li

Auto-generated profile, based on publicly available information

Jiping Li

Beijing SOJO Electric Company Limited, Beijing, China

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 April 2010 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
MWMingliang Wang
Mingliang Wang
JLJiping Li
Jiping Li
KNKhai D. T. Ngo
Khai D. T. Ngo
Huikai XieHuikai Xie
Huikai Xie
A novel silicon-based inductor, power inductor in silicon (PIiS) has been proposed and experimentally demonstrated. The PIiS is fabricated at wafer level using a silicon-molding micromachining technique in which 200-μm-thick copper windings are embedded into a silicon substrate and both sides of the substrate are capped with a polymer-magnetic power composite. Through-silicon vias (TSVs) and copper routings are also added so that a PIiS can be directly used as a surface-mountable packaging substrate. A 3 ×3 ×0.6 mm3 PIiS with a measured inductance of 390 nH has been fabricated. The Q factor of this PIiS is 10 at 6 MHz. An ultracompact buck converter has been made by surface mounting off-shelf power ICs and capacitors on a PIiS. The buck converter is 3 ×3 ×1.2 mm3, which has successfully delivered 500 mA at 1.8 V with an 80% efficiency at 6 MHz.

7 July 2016 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
JLJiping Li
Jiping Li
VTVictor Farm-Guoo Tseng
Victor Farm-Guoo Tseng
ZXZhiming Xiao
Zhiming Xiao
Huikai XieHuikai Xie
Huikai Xie
This paper reports the design, fabrication, and characterization of a novel power inductor embedded inside a silicon substrate and fabricated at wafer level. Such power inductors in silicon (PIiS) employ high-aspect ratio silicon molds formed with deep-reactive ion etching to obtain large cross-sectional electroplated copper windings (as thick as the silicon wafers). The PIiS also utilize high-resistivity magnetic composites as the core material, in a closed flux path manner, for small core losses and low electromagnetic interference. By using copper electroplating for all of the conductors in the component, the contact resistances between the conductive layers can be minimized and the inductors' quality factor can be improved significantly. Toward the end of the fabrication process, surface bonding pads are also formed on the PIiS, leading to a compact converter packaging with IC circuitry. A square-shaped spiral inductor (of size 3 × 3 × 0.83 mm 3 ) was successfully fabricated. Large inductance (430 nH), low dc resistance (84 mΩ), and high quality factor (21) were achieved at 6 MHz. The fabricated inductor was assembled with a TI TPS62621 buck converter IC, and it achieved a maximum power conversion efficiency of 83%.

1 February 2014 in Sensors and Actuators A: Physical
Verified
Journal Article
Closed access
VTVictor Farm-Guoo Tseng
Victor Farm-Guoo Tseng
JLJiping Li
Jiping Li
XZXiaoyang Zhang
Xiaoyang Zhang
JDJinling Ding
Jinling Ding
QCQiao Chen
Qiao Chen
Huikai XieHuikai Xie
Huikai Xie