In the traditional organic–inorganic hybrid construction method, due to the fact that inorganic substances usually exist in the form of fillers, their addition amount is limited, resulting in insignificant effects of reinforcement, toughening, and cost reduction. Inspired by the mineralization bridging mechanism in tooth repair, we have broken through the limitation that inorganic components merely serve as fillers, and used inorganic oligomers as cross‐linker to cross‐link hydroxyapatite, constructing a continuous inorganic network structure. This network is further integrated with an organic network formed from plant proteins, ultimately resulting in a unique bi‐continuous organic‑inorganic hybrid structure. Compared with the traditional hybrid method, the addition amount of inorganic phase in this bi‐continuous hybrid adhesive has increased from 0.2%–3.0% to 50%. Surprisingly, under the same inorganic content (50%), its strength and toughness are 6 and 121 times higher than traditional hybrid adhesives. In addition, this bi‐continuous hybrid plant protein adhesive has the advantages of low cost and low carbon emissions compared with urea‐formaldehyde resin. This strategy offers a promising new approach for developing high‐performance and low‐cost composite materials.
16 October 2026 in ACS Sustainable Chemistry & Engineering
The development of sustainable and versatile formaldehyde-free bio-based adhesives is currently a research focus in composite science. However, the extensive brittleness and poor performance of them limit further application. Inspired by the robust structure of meniscus-composed of a rigid framework of interwoven collagen fibers and a flexible buffer layer of glycosaminoglycan matrix-this study utilizes poly(ethylene glycol itaconate) (EIA) synthesized from itaconic acid derived from the fermentation of crop straws as a buffer layer. Through hydrogen bonding, EIA is introduced into the rigid cross-linked network of soy protein, resulting in the development of a versatile adhesive (SM/EIA). The adhesion work of optimized SM/EIA adhesive was increased by 458% (0.424 J), demonstrating superior toughness. The dry/wet shear strength reached 2.05 MPa and 1.13 MPa, representing increases of 37.6% and 289.7%, respectively.It not only exhibited exceptional wood bonding capabilities but also demonstrated versatile bonding performance across diverse substrates including ceramics and metals. Additionally, it exhibited excellent water retention, coating applicability, and pre-press performance, along with notable mold resistance and flame-retardant properties. Combined with life cycle assessment, the biomimetic design offers novel perspectives for advancing adhesive systems, facilitating the replacement of conventional petroleum-based adhesives through systematic integration of renewable resources and structural bioinspiration.