Discrete fracture network (DFN) models are a powerful alternative to continuum models for subsurface flow and transport simulations because they explicitly include fracture geometry and network topology, thereby allowing for better characterization of the latter's influence on flow and transport through fractured media. Recent advances in high performance computing have opened the door for flow and transport simulations in large explicit three‐dimensional DFN, but this increase in model fidelity and system size comes at a huge computational cost because of the large number of mesh elements required to represent thousands of fractures (with sizes that can range several orders of magnitude, from millimeter to kilometer). In most subsurface applications, fracture characteristics are only known statistically and numerous realizations are needed to bound uncertainty in flow and transport in the system, thereby exacerbating the computational burden. Graphs provide a simple and elegant way to characterize, query, and interrogate fracture network connectivity. We propose a DFN model reduction framework where various graph representations are used in conjunction with high‐fidelity DFN simulations to increase computational efficiency while retaining accuracy of key quantities of interest. The appropriate choice of a graph representation, namely, which attributes of the DFN are to be represented as nodes and which ones as edges connecting those nodes, depends on the relevant scientific questions. We demonstrate that the proposed DFN model reduction framework provides an efficient means for DFN modeling through both system reduction of the DFN using graph‐based properties and combining DFN and graph‐based flow and transport simulations.
18 December 2023 in International Journal of Hydrogen Energy
We develop a theoretical model for power law tailing behavior of transport in fractured rock based on the relative dominance of the decay rate of the advective travel time distribution, modeled using a Pareto distribution (with tail decaying as ∼ time−(1+α)), versus matrix diffusion, modeled using a Lévy distribution. The theory predicts that when the advective travel time distribution decays sufficiently slowly (α1, the −3/2 decay rate is recovered. For weak matrix diffusion or short advective first breakthrough times, we identify an early‐time regime where the breakthrough curve follows the Pareto distribution, before transitioning to the late‐time decay rate. The theoretical predictions are validated against particle tracking simulations in the three‐dimensional discrete fracture network simulator dfnWorks, where matrix diffusion is incorporated using a time domain random walk.
20 April 2021 in IEEE Transactions on Control Systems Technology
We formulate a nonlinear optimal control problem for intraday operation of a natural gas pipeline network that includes storage reservoirs. The dynamics of compressible gas flow through pipes, compressors, reservoirs, and wells are considered. In particular, a reservoir is modeled as a rigid, hollow container that stores gas under isothermal conditions and uniform density, and a well is modeled as a vertical pipe. For each pipe, flow dynamics are described by a coupled partial differential equation (PDE) system in density and mass flux variables, with momentum dissipation modeled using the Darcy–Wiesbach friction approximation. Compressors are modeled as scaling up the pressure of gas between the inlet and outlet. The governing equations for all network components are spatially discretized and assembled into a nonlinear differential-algebraic equation (DAE) system, which synthesizes above-ground pipeline and subsurface reservoir dynamics into a single reduced-order model. We seek to maximize an objective function that quantifies economic profit and network efficiency subject to the flow equations and inequalities that represent operating limitations. The problem is solved using a primal–dual interior point solver, and the solutions are validated in computational experiments and simulations on several pipeline test networks to demonstrate the effectiveness of the proposed methodology.
1 January 2014 in International Journal of Non-Linear Mechanics
We present a novel workflow for forecasting production in unconventional reservoirs using reduced-order models and machine-learning. Our physics-informed machine-learning workflow addresses the challenges to real-time reservoir management in unconventionals, namely the lack of data (i.e., the time-frame for which the wells have been producing), and the significant computational expense of high-fidelity modeling. We do this by applying the machine-learning paradigm of transfer learning, where we combine fast, but less accurate reduced-order models with slow, but accurate high-fidelity models. We use the Patzek model (Proc Natl Acad Sci 11:19731–19736, https://doi.org/10.1073/pnas.1313380110, 2013) as the reduced-order model to generate synthetic production data and supplement this data with synthetic production data obtained from high-fidelity discrete fracture network simulations of the site of interest. Our results demonstrate that training with low-fidelity models is not sufficient for accurate forecasting, but transfer learning is able to augment the knowledge and perform well once trained with the small set of results from the high-fidelity model. Such a physics-informed machine-learning (PIML) workflow, grounded in physics, is a viable candidate for real-time history matching and production forecasting in a fractured shale gas reservoir.