24 May 2018 in NPG Asia Materials
Colloids of electrically charged nanorods can spontaneously develop a fluid yet ordered liquid crystal phase, but this ordering competes with a tendency to form a gel of percolating rods. The threshold for ordering is reduced by increasing the rod aspect ratio, but the percolation threshold is also reduced with this change; hence, prediction of the outcome is nontrivial. Here, we show that by establishing the phase behavior of suspensions of cellulose nanocrystals (CNCs) fractionated according to length, an increased aspect ratio can strongly favor liquid crystallinity without necessarily influencing gelation. Gelation is instead triggered by increasing the counterion concentration until the CNCs lose colloidal stability, triggering linear aggregation, which promotes percolation regardless of the original rod aspect ratio. Our results shine new light on the competition between liquid crystal formation and gelation in nanoparticle suspensions and provide a path for enhanced control of CNC self-organization for applications in photonic crystal paper or advanced composites.
1 December 2018 in AIP Advances
Hydrogels are increasingly used as a surrogate extracellular matrix in three-dimensional cell culture systems, including microfluidic cell culture. Matrigel is a hydrogel of natural origin widely used in cell culture, particularly in the culture of stem cell-derived cell lines. The use of Matrigel as a surrogate extracellular matrix in microfluidic systems is challenging due to its biochemical, biophysical, and biomechanical properties. Therefore, understanding and characterising these properties is a prerequisite for optimal use of Matrigel in microfluidic systems. We used rheological measurements and particle image velocimetry to characterise the fluid flow dynamics of liquefied Matrigel during loading into a three-dimensional microfluidic cell culture device. Using fluorescence microscopy and fluorescent beads for particle image velocimetry measurements (velocity profiles) in combination with classical rheological measurements of Matrigel (viscosity versus shear rate), we characterised the shear rates experienced by cells in a microfluidic device for three-dimensional cell culture. This study provides a better understanding of the mechanical stress experienced by cells, during seeding of a mixture of hydrogel and cells, into three-dimensional microfluidic cell culture devices.
1 April 2011 in Thermochimica Acta
15 December 2008 in Journal of Physics: Condensed Matter
The influence of Al(2)O(3) nanoparticles on the curing of an epoxy thermoset based on diglycidyl ether of bisphenol A was investigated using temperature-modulated differential scanning calorimetry (TMDSC) and rheology. Diethylene triamine was used as a hardener. TMDSC not only allows for a systematic study of the kinetics of cure but simultaneously gives access to the evolution of the specific heat capacities of the thermosets. The technique thus provides insight into the glass transition behaviour of the nanocomposites and hence makes it possible to shed some light on the interaction between the nanoparticles and the polymer matrix. The Al(2)O(3) fillers are shown to accelerate the growth of macromolecules upon isothermal curing. Several mechanisms which possibly could be responsible for the acceleration are described. As a result of the faster network growth chemical vitrification occurs at earlier times in the filled thermosets and the specific reaction heat decreases with increasing nanoparticle concentration. Rheologic measurements of the zero-shear viscosity confirm the faster growth of the macromolecules in the presence of the nanoparticles.
11 July 2002 in Physical Review B
It is well known that in addition to the longitudinal modulus, viscoelastic liquids show a shear stiffness at sufficiently high probe frequencies due to structural relaxations. For probe frequencies that are large compared to the structural relaxation frequency, the measured elastic longitudinal and shear moduli become so-called clamped properties and respectively). During freezing or polymerization of amorphous liquids, these clamped moduli behave in a strongly nonlinear fashion as a function of temperature or polymerization time. Based on Brillouin spectroscopy data we will show that there exists a linear relation between and over a large temperature or polymerization time range. Surprisingly, the parameters of this linear relation between the elastic moduli vary only little for different materials. Implications for the nonlinear elastic behavior at the glass transition will be discussed on the basis of mode Grüneisen parameters.