7 December 2016 in IEEE Sensors Journal
A compact all-fiber magnetic field sensor is achieved by using Mach-Zehnder interferometer based on the hollow optical fiber (HOF) and the magnetic fluid (MF). The HOF is sandwiched between two single mode fibers (SMFs), which form an SMF-HOF-SMF (SHS) structure. Then, the SHS structure is immersed in MF to sense the magnetic field strength. The magnetic field assisted tunable refractive index of MF is exploited to realize the sensor. As a result, the magnetic field strength can be obtained by monitoring the wavelength shift of the SHS structure. The maximum magnetic field sensing sensitivity of -170 pm/Oe is obtained at the wavelength around 1580 nm. Besides, an intensity sensitivity of -0.21268 dB/Oe is also achieved.
27 December 2022 in Communications Engineering
Optical fiber curvature sensors have been considered as a promising option for human motion detection due to its good toughness, bending flexibility and anti-electromagnetic interference. However, for wearable devices, the miniature configuration is preferred, and a high integration of the light emitter, receiver and guided fiber is essential to configure the miniaturized sensing system. Here, we present a miniaturized curvature sensing system by integrating a GaN-based optoelectronic chip with the plastical optical fiber (POF). The light emitter and detector are fabricated on a GaN-on-sapphire wafer to form a tiny chip sized at 2.5 $$\times$$ 1.5 mm2. The on-chip photodetector (PD) effectively senses the reflected light intensity, extracting information on the fiber bending deformation. A compact curvature sensing system is demonstrated for finger motion detection with movement angles of 30–90° and frequencies of 0.4, 1, and 1.6 Hz. The results show that the monolithically integrated LED and PD chip can be combined with the POF with reliable operation. The demonstration of the monolithically integrated optoelectronic device suggests a promising potential technology for future wearable fiber optical sensor system.
7 January 2025 in The European Physical Journal Special Topics
2 April 2024 in IEEE Transactions on Electron Devices
Integrating multiple optical devices on a single chip to create the so- called photonic integrated circuit (PIC) provides the advantages of compact size and low cost, with broad application prospects in fields, such as information processing, sensing, photoelectricity coupling, optical communication, and interconnection. However, compatibilities of material and fabrication are the main impediments to realize the PIC. Herein, we propose a PIC solution based on the epitaxial III–V on Si, with all active devices (a light source, an electroabsorption modulator, and two photodiodes) adopting the same InGaN/AlGaN multiple quantum wells (MQW) diode structure to solve the abovementioned compatibility problems. The light-emitting peak wavelength of the integrated near ultraviolet (UV) light source is 385 nm. Because the MQW layer is sandwiched into the waveguide (WG), all the signal conversion and transmission are limited in the WG with relatively high coupling efficiency. ON-chip data transmission can be realized using direct modulation via the light-emitting diode or the indirect modulation via the electroabsorption modulator at a single light path. The extinction ratio of the InGaN/AlGaN MQW modulator under a reverse bias voltage of 8 V is approximately 8.4% and can be further increased by enlarging the bias. The proposed UV PIC solution features simple structure and fabrication, with potential value in UV microscopy, biosensing, and ON-chip data communication.
13 January 2019 in IEEE Photonics Technology Letters
We demonstrate that the mode-locked all-fiber laser can simultaneously emit two-color broadband LP 11 transverse mode in the near-infrared region by sharing a common mode-selective coupler (MSC). The MSC mode converter is designed to achieve simultaneous dual-channel mode conversion corresponding to the wavelength regions at 1.0 and 1.5μm, in which each channel possesses broadband mode conversion from LP 01 to LP 11 mode with high mode purity. As a proof of concept, we implement an all-fiber ytterbium (Yb)- and erbium (Er)-doped fiber lasers with a mode-locked two-color LP 11 modal output. The laser consists of two ring cavities combined with a common MSC mode converter. The generated LP 11 modal pulses have a full width at half maximum of 11 and 8.1 nm for Yb- and Er-doped fiber laser, respectively. The presented fiber laser would represent a promising light source in the field of structured light and ultrafast optics.
30 January 2023 in IEEE Photonics Technology Letters
In this letter, we demonstrated an all-fiber laser that can simultaneously radiate dual-color vortex beams by incorporating a dual-channel mode-selective coupler (DC-MSC) into the laser cavity. By optimizing the phase-matching condition between LP 01 and LP 11 modes, wavelength-dependent mode coupling could be observed. In this case, a broadband mode conversion with two isolated bands can be achieved, which totally covers the gain bands of ytterbium and erbium ion, enabling the simultaneous generation of vortex beams (VBs) at 1.06 μm and 1.55 μm wavebands. With intra-cavity mode conversion and polarization controlling, a coaxial two-color VB is transmitted directly from the laser cavity, providing a more compact dual-beam light source for subsequent vortex nonlinear frequency conversions, such as wavelength extension to the red light and the mid-infrared (3 μm) wavebands.