27 August 2019 in RSC Advances
Biowaste eggshell can be used as a cathode while in its calcined form and it is found to be suitable as an anode in an electrochemical cell. This not only enables energy to be stored reversibly but also achieves waste management and sustainability goals by redirecting material away from landfill. Biowaste eggshell comprises 94% calcium carbonate (CaCO3; calcite), an attractive divalent ion source as a viable option for energy storage. X-ray diffraction and electron microscopy coupled with energy dispersive analyses of the calcined (thermally decomposed) biowaste eggshell show that CaO has been formed and the reaction is topotactic. Field emission scanning electron microscopy (FESEM) images of the textural relationship show that the thermal decomposition of calcite resulted in a change in morphology. High-resolution XPS spectra of the C 1s core level from the CaCO3 and CaO shows that there is a chemical difference in the carbon environments and the total atomic fraction of Ca for each sample with that of carbonate and oxygen varies. In a three-electrode configuration, a working electrode of CaCO3 is found to be electrochemically active in the positive region, whereas a CaO electrode is active in the negative region. This indicates the potential use of eggshell-derived materials for both cathode and anode. Both the electrodes exhibited a quasi-box-shaped potentiostatic curve implying a capacitor-type behaviour. The CaCO3 cathode possesses a modest discharge capacitance of 10 F g−1 but the CaO anode showed excellent capacitance value of 47.5 F g−1. The CaO electrode in both positive and negative regions, at a current density of 0.15 A g−1 exhibited 55 F g−1 with a retention of nearly 100% after 1000 cycles. At a very low sweep rate of 0.5 mV s−1, the CaO electrode showed typical redox-type behaviour with well-defined peaks illustrating battery-type behaviour. The outcome of the calcite/CaO transformation, exhibiting technological importance for energy storage applications, may help to re-evaluate biowaste before throwing it away. The current work explores the viability of eggshell derived materials as a cathode/anode for use in batteries and capacitors.
8 October 2018 in Nanoscale Advances
A thin layer of amorphous carbon on the surface of CaMoO4synthesized at a lower temperature suitable for sodium devices storing energy.
26 August 2019 in Journal of Materials Chemistry A
Lithium-rich transition metal disordered rock salt (DRS) oxyfluorides have the potential to lessen one large bottleneck for lithium ion batteries by improving the cathode capacity. However, irreversible reactions at the electrode/electrolyte interface have so far led to fast capacity fading during electrochemical cycling. Here, we report the synthesis of two new Li-rich transition metal oxyfluorides Li2V0.5Ti0.5O2F and Li2V0.5Fe0.5O2F using the mechanochemical ball milling procedure. Both materials show substantially improved cycling stability compared to Li2VO2F. Rietveld refinements of synchrotron X-ray diffraction patterns reveal the DRS structure of the materials. Based on density functional theory (DFT) calculations, we demonstrate that substitution of V3+ with Ti3+ and Fe3+ favors disordering of the mixed metastable DRS oxyfluoride phase. Hard X-ray photoelectron spectroscopy shows that the substitution stabilizes the active material electrode particle surface and increases the reversibility of the V3+/V5+ redox couple. This work presents a strategy for stabilization of the DRS structure leading to improved electrochemical cyclability of the materials.
3 June 2019 in Chemistry of Materials
The strive for increased energy density in Li-ion batteries is particularly dependent on the cathode materials, that so far have been limiting for the overall battery performance. A new class of materials, Li-rich disordered rock-salts, has recently been brought forward as promising candidates for next-generation cathodes due to their ability to reversibly cycle more than one Li-ion per transition metal. Several variants of these Li-rich cathode materials have been developed recently and show promising initial capacities, but challenges concerning capacity fade and voltage decay during cycling need yet to be overcome. Mechanisms behind the significant capacity fade of some materials must be understood to allow for the design of new materials in which detrimental reactions can be mitigated. In this study the origin of the capacity fade in the Li-rich material Li2VO2F is investigated and it is shown to begin with a degradation of the particle surface that spreads inwards with continued cycling.
30 March 2018 in ChemElectroChem
24 July 2020 in Journal of Raman Spectroscopy
Li‐rich disordered rock salt (DRS) materials are new promising high‐capacity cathode candidates for Li‐ion batteries. DRS structures were initially assumed to have a completely random cation and anion distribution, but recent reports suggest that some of these structures can exhibit local atomic arrangements, or short‐range ordering (SRO). Here, we prove the existence of SRO in the Li‐rich DRS material Li2VO2F by employing Raman spectroscopy supported by density functional theory (DFT) calculations. Our results suggest that this combination of Raman spectroscopy with computational tools is useful for SRO estimation in this new class of Li‐rich DRS cathode materials.