14 October 2023 in Advanced Engineering Informatics
28 August 2023 in Measurement
30 December 2021 in IEEE Sensors Journal
Strain monitoring of high-speed train crossbeams is essential because as a vital load-bearing structure carrying several tonnes of under-vehicle equipment for high-speed trains, they are likely to be damaged under prolonged loading. This paper proposed a strain field reconstruction and monitoring method based on load-strain linear superposition. Firstly, finite element analysis was performed with two loads and three loads showing that the algorithm reconstructed the strain field of the crossbeam on a high-speed train with an average relative error of less than 0.01%. Then a sensing network with 24 fiber Bragg grating sensors was established. Train line operation tests were conducted and strain measurement information was obtained. On this basis, the strain field of the crossbeam was reconstructed with an average fitting error of less than 2%. This research shows the power of the load-strain linear superposition method in the strain field monitoring of the load-bearing structure for the operation and maintenance of the train.
16 October 2023 in IEEE Sensors Journal
Fault diagnosis of rolling bearings is crucial for ensuring the reliability and safety of rotating machinery. However, substantial noise interference has caused significant difficulties in improving the robustness of fault diagnosis. To address this issue, a Multi-feature Fusion Attention-guided Mechanism with Wide First-layer Kernels Convolutional Neural Network (MFA-WCNN) is proposed. The position information is introduced into the attention module by feature fusion to catch the relative position or other information of fault fluctuations segment in the whole cycle, which extract more discriminative fault-related features from noise-contaminated signals. Concretely, a Feature Extraction module (CFE-Module) is proposed to utilize the different levels of features of rolling bearings, by Constructing a CNN with Wide First-layer Kernels to extract the position information from the low-level features. Furthermore, a Feature Learning Adaptive adjustment module (FLA-Module) is constructed to extract advanced features containing semantic information, simultaneously ignore the irrelevant information and noise in the fusion features. These two modules allow MFA-WCNN to extract and generate multi-level fusion features with position details and semantic information, which promotes improvement of fault diagnosis performance with strong noise. The evaluation experiments conducted on two testing platforms show that the network has excellent fault diagnosis ability under strong noise and unknown noise.
17 December 2024 in IEEE Transactions on Industrial Informatics
The available labeled samples are scarce when high-end machineries work in different operating-load conditions. There are often new faults present when conducting transfer fault diagnosis, leading to performance degradation. How to accurately identify them under dynamic load-variable conditions is a more challenging issue. Therefore, the filter-match-interact transfer framework (FMI-TF) is proposed, which consists of three interactive networks. Open samples filtering: learn the known–unknown samples classification hyperplane by designing the progressive filtering discriminator, achieving target samples distraction and progressive outliers filtering. Weighted auxiliary matching: align domain distributions and tighten known–unknown samples boundary through the entropy-modified weighted matching mechanism, the auxiliary distracting classifier, and the high-confidence negative probabilities of unknown samples. Interactive refinement rectification: mine and cultivate information interaction and coupling within two networks by improving the differentiated interactive updating module, and achieving positive network transfer. The FMI-TF has been validated on different mechanical testbeds.
4 December 2025 in Engineering Research Express
Reliable bearing fault diagnosis is vital for the safe operation of rotating machinery. However, noise contamination in vibration signals remains a persistent barrier to accurate detection. This paper proposes a wavelet-enhanced multi-scale convolutional neural network with squeeze-and-excitation attention (WMS-SE-CNN), explicitly designed for noise-resilient diagnosis. The framework integrates three key innovations: (i) Gaussian noise augmentation before wavelet decomposition to emulate real-world disturbances and strengthen robustness, (ii) parallel convolutional branches with kernel sizes of 3, 5, and 7 to capture both impulsive transients and long-range oscillatory fault patterns, and (iii) a lightweight channel-wise SE recalibration module that highlights fault-relevant features with minimal computational overhead. Evaluations on two heterogeneous datasets—the Shandong University (SDU) dataset and the Case Western Reserve University (CWRU) benchmark—demonstrate not only high diagnostic accuracy but also strong cross-dataset generalization under noisy conditions. In contrast to prior CNN–wavelet or attention-based approaches that primarily address clean or single-domain data, WMS-SE-CNN advances both noise robustness and practical feasibility for industrial fault diagnosis.