Jun Wang

Jun Wang

Auto-generated profile, based on publicly available information

Jun Wang

College of Electronics and Information Engineering, Sichuan University, Chengdu, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
ZWZhendong Wang
Zhendong Wang
XYXiaoqing Yang
Xiaoqing Yang
XZXin Zhou
Xin Zhou
PSPiqiang Su
Piqiang Su
JWJun Wang
Jun Wang
A novel sensor tag based on spit ring resonator (SRR) for detecting cracks on curved metal surfaces is presented in this paper. This tag is flexible and can be easily covered on the surface of curved metal structure. The SRR shape is etched on the tag, which is excited by the waveguide to make it resonate. Accurate crack detection can be achieved based on the resonance frequency shift caused by the crack. Due to the strong field enhancement effect during SRR resonance, the tag is highly sensitive in detecting metal cracks. When the radius of the curved film-coated metal is 40mm, there will be a resonant frequency shift greater than 260MHz when detecting sub-millimeter cracks of different sizes. And a resonance frequency shift of at least 100MHz is still exhibit when a 10 $\mu {\mathrm{ m}}$ microcrack is detected. This tag is expected to provide a new idea for high-precision surface crack detection of curved metals.

13 December 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XZXin Zhou
Xin Zhou
XYXiaoqing Yang
Xiaoqing Yang
PSPiqiang Su
Piqiang Su
JWJun Wang
Jun Wang
ZWZhendong Wang
Zhendong Wang
DGDezhen Gu
Dezhen Gu
A novel sensor for detecting defects in non-metallic composites pipeline is proposed. The sensor is composed of SSPPs structure and rectangular spiral ring resonators (RSRRs) array, which has the characteristic of low bending losses. Eight RSRRs with different sizes are interlaced on both sides of the SSPPs sensor, so that the electromagnetic field of the sensor is mainly concentrated on RSRRs. The detection system has eight independent resonant frequencies, which are generated by different resonant elements. Each resonant frequency only responds to the defects in its own electromagnetic sensitive area, which is mainly manifested as resonant frequency shift. Therefore, the detection and location of defects can be realized by observing the different performances of the resonant frequency group. Taking Teflon pipeline as an example, the simulation and experiment show that the sensor can detect defects with a radius of 0.9mm. The sensor has the advantages of high detection efficiency, low missed detection rate, simple operation, and defect location capacity.

5 October 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
PSPiqiang Su
Piqiang Su
XYXiaoqing Yang
Xiaoqing Yang
ZWZhendong Wang
Zhendong Wang
JWJun Wang
Jun Wang
XYXiaoqing Yang
Xiaoqing Yang
This article proposes a novel sensor based on tilted spoof surface plasmon polaritons (SSPPs), which is used to detect impurities in nonmetallic composite materials. The SSPPs sensor can be bent and can be wrapped on the material under test (MUT). When the tilted SSPPs sensor detects impurities, the transmission coefficient of the SSPPs sensor at the cutoff frequency will change. By increasing the tilt angle of the SSPPs sensor unit structure and reducing the size of SSPPs sensor appropriately, the sensitivity and resolution of impurities detection can be improved without increasing the working frequency of the SSPPs sensor significantly. Taking Teflon as an example of MUT, the measurement frequency is 14.4 GHz; by simulation and experiment, it can be proved that the tilted SSPPs sensor can realize impurities detection with the size of $0.5\times 1\times0.5$ mm 3 in nonmetallic composite materials. The tilted SSPPs sensor can distinguish impurities that have a spacing of 0.5 mm. Compared with previous work, the tilted SSPPs sensor can quickly determine whether the MUT has impurities or not by moving MUT in one direction.

6 December 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
PSPiqiang Su
Piqiang Su
XYXiaoqing Yang
Xiaoqing Yang
JWJun Wang
Jun Wang
ZWZhendong Wang
Zhendong Wang
HPHuajiang Peng
Huajiang Peng
A spoof surface plasmon polaritons (SSPPs) sensor based on liquid switch control is proposed to detect metal surface cracks. The sensor consists of liquid switch controllers and power division structure. The liquid switch consists of a plastic pipe and syringe with water, which is fixed on the branch structure of SSPPs sensor. By filling the plastic pipe with water, the branch cannot transmit signal, which is called “ OFF” state. The branch retransmits signal by pumping water out of plastic pipe, which is called “ ON” state. By switching the “ ON” or “ OFF” state of sensor’s branches, it can control the transmission path of SSPPs sensor, that is, control the sensing area of SSPPs sensor. The detection method is based on the change of reflection coefficient of SSPPs sensor caused by cracks. By switching the states of branches in turn, it can detect whether there is a crack at each branch. The proposed sensor uses liquid switch instead of mechanical movement, which can realize rapid detection in the metallic materials with large surface area. The simulation and experimental results show that the SSPPs sensor can effectively detect metal surface crack with a width of 0.1mm.

18 September 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
HLHangyu Li
Hangyu Li
XYXiaoqing Yang
Xiaoqing Yang
JWJun Wang
Jun Wang
JZJiahao Zou
Jiahao Zou
A strain detection sensor for metallic/non-metallic materials based on spoof localized surface plasmons (SLSPs) is proposed. The sensor has a wide range of applications and is closed to the surface of metallic or non-metallic materials. The metal spiral structure (MSS) is used to excite the SLSPs, and combined with a metal coupling plate to generate the coupling capacitance, thus to form the designed strain sensor. The strain of material under test (MUT) is caused by stress. And the strain changes the distance between the two plates structure of the sensor, which causes a shift in the resonant frequency of the sensor. The frequency shift is used to accurately detect the amount of strain generated by MUT. Due to very high sensitivity of SLSPs excited by the MSS structure to the surrounding environment, the sensor can detect the small strains generated by MUT. For the maximum detectable strain of 1.3mm, the sensor has a frequency offset of 613MHz by experiment. And the sensor has a resonance frequency shift about 37MHz when detecting 0.01mm strain. This strain sensor is expected to provide a new idea for the high-precision small strains detection of the MUT.

14 March 2022 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
DGDezhen Gu
Dezhen Gu
XYXiaoqing Yang
Xiaoqing Yang
PSPiqiang Su
Piqiang Su
HPHuajiang Peng
Huajiang Peng
GJGuangming Jiang
Guangming Jiang
TLTingting Li
Tingting Li
The vortex beam is an electromagnetic wave that carries orbital angular momentum (OAM). It has an infinite variety of orthogonal modes and provides a new method for increasing wireless communication channels and improving the resolution of radar imaging, therefore it has attracted more attention in recent years. In this paper, a vortex-beam generator is proposed, whose overall structure is made up of a series of circular radiation patches placed on a dielectric substrate and a ground plane, and the ground is composed of corrugated metal–insulator–metal (CMIM). The circular patches are radiating units that can also generate the phase shifts needed for the vortex beam, they are placed in different layers with the spoof surface plasmon polaritons (SSPPs) waveguide to enhance the coupled electric field. The CMIM structure functions both as a waveguide of SSPPs and as the ground plane. Reasonable design, numerical simulation, and experimental measurement show that the generator can generate left and right circularly polarized vortex beams with different OAM modes at different frequencies without changing the structure. And, the generator has many advantages, such as single feed, unidirectional, multi-mode, and small size, and it can be integrated into the system and integrated circuits more easily.