28 August 2025 in Optics Express
Micro-CT imaging is widely used in materials science, biomedical research, geological exploration, and industrial inspection due to its non-destructive capabilities. However, traditional systems face challenges due to limitations in spatial bandwidth product (SBP), making it difficult to achieve both a large field-of-view (FOV) and high-resolution imaging simultaneously. This paper presents a segmented light deflection method using cascaded optical fiber tapers integrated within a “fiber taper–image intensifier-camera” coupling architecture. This design reduces distortion caused by large taper ratios in single-stage systems. Additionally, a multi-view geometric registration calibration approach is developed based on CT projection geometric constraints to address mismatches between traditional 2D planar distortion correction methods and CT projection geometry. A cascaded fiber taper array (53 mm input - 34 mm intermediate - 16 mm output) was implemented in a 2 × 2 tiling configuration. The system achieves wide-FOV micro-CT imaging with a maximum imaging area of 106.4 × 106.4 mm2. Resolution testing confirmed a 3 μm resolution within a 4.1 × 4.1 mm2 FOV. System reconstruction efficacy was validated through rock core and printed circuit board (PCB) samples.
22 October 2025 in Optics Express
Multi-view X-ray imaging systems extend the imaging field of view by integrating multiple imaging modules. Nevertheless, inter-module performance variations in detector arrays, gain drift, and angle-dependent effects cause cross-view grayscale inconsistencies, which degrade overall imaging quality. While existing X-ray imaging approaches primarily rely on single-view flat-field correction or per-projection normalization, these strategies remain inadequate for achieving global consistency across views. To overcome this limitation, this study proposes a physics-constrained multi-view image correction (PCMIC) method. By constructing a globally shared attenuation field to model view-specific nonlinear responses and incorporating boundary anchoring together with monotonicity constraints, the method ensures strong physical fidelity. Experiments conducted on a self-developed large-field, high-resolution micro-CT system demonstrate that PCMIC effectively suppresses stitching artifacts and improves grayscale consistency, structural fidelity, and quantitative stability.