15 May 2023 in Applied Physics Letters
Single-pixel imaging (SPI) is a computational imaging modality that reconstructs images from information collected with a single-pixel detector. Due to the relatively large bandwidth and cheap price of single-pixel detectors over pixel-array detectors, SPI has been demonstrated with great success in many imaging scenarios. In this work, we further extended SPI to microscopic Mueller-matrix polarimetry, which is capable of providing polarization-sensitive properties of biological tissue with a millimeter-size field of view and micrometer-size resolution. As a proof of concept, we applied polarimetry on normal and cancerous esophagus tissues from patients and reconstructed their Mueller matrices. Effects of depolarization, retardation, and diattenuation were also examined by decomposing Mueller matrices. We envision that the developed computational technique can bring new possibilities for both SPI and Mueller-matrix polarimetry.
10 April 2019 in IOP Conference Series: Materials Science and Engineering
The flexible bearing is an important component and installed in the harmonic driver which transmits motion by elastic characteristics of flexible parts. The rings of the flexible bearing are forced to deform by the wave generator of harmonic driver in its unique working condition different from normal bearings. A large bending stress is generated in the both rings of the flexible bearing after assembly deformation in addition to the contact stress of normal bearings. And, the meshing state of the internal gear of the driver will also be affected greatly. In the present research, a statically indeterminate model is proposed by combining theory of normal bearings with mechanics of materials to solve the deformation characteristics and internal force state of the flexible bearing under the wave generator. The results show that the error of mathematical model is within 6.7%.
13 February 2019 in IOP Conference Series: Materials Science and Engineering
Flexible bearings are critical components of harmonic drives. In service, the corresponding positions of the long and short axes of the inner and outer rings of a flexible bearing regularly change. This leads to a fatigue fracture of the outer ring because of the cyclic alternating load. In this study, a multi-body contact model and a dynamic model were established using ABAQUS to analyze the load spectrum of a flexible bearing and a wave generator. The dynamic analysis results were employed to simulate the fatigue life of the inner and outer rings using nCode-DesignLife. The results show that the inner ring underwent significant fatigue damage at the long-axis position, and the corresponding fatigue life was low. As the damage on the outer ring was due to continuous alternating deformation, the inner and outer surfaces of the outer ring were significantly damaged. Besides, the outer ring underwent fatigue damage prior to the inner ring under the same working conditions. The results provide theoretical references and practical guidance for the design and life estimation of flexible thin-wall bearings.